public inbox for ltp@lists.linux.it
 help / color / mirror / Atom feed
From: Francesco RUNDO <francesco.rundo@st.com>
To: gowrishankar <gomuthuk@linux.vnet.ibm.com>
Cc: ltp-list@lists.sf.net
Subject: Re: [LTP] [PATCH] cgroups: conditionally enable building cgroup tests
Date: Mon, 06 Jul 2009 14:42:36 +0200	[thread overview]
Message-ID: <4A51F13C.3050701@st.com> (raw)
In-Reply-To: <4A51E745.3060105@linux.vnet.ibm.com>

Hi Gowri,

thanks so much for your quick reply.
My question is: "Is there a 'real' scenario in which cgroup is enabled 
in the Kernel without cgroupstat.h header" ?

Because I think the above scenario (cgroup enabled but no cgroupstat.h 
header) is wrong so that your patch provide a "cover" for an error 
placed in the system. Is it true ?

If my understanding is wrong, for me there are no concerns about your patch.

Regards
Francesco Rundo

gowrishankar wrote:

> Hi Francesco,
>
> Francesco RUNDO wrote:
>
>> Hi Gowri,
>>
>> I've already fixed the same issue you reported. I've tested it 
>> successfully.
>>
>> Subrata has already merged my patch (please, find it in attachment).
>>
>> Please, check it before to submit another patch.
>>
>
> I had already seen your patch and generated mine on top of Jun release 
> (which
> has your fix for CROSS_COMPILE).Your patch could not help in a 
> scenario where kernel has cgroup support but cgroupstat.h file is 
> missing in base OS, and
> build failed. And hence, I am proposing this patch.
>
> Thanks,
> Gowri
>
>> Thanks
>> Regards
>> Francesco Rundo
>>
>> gowrishankar wrote:
>>
>>> Hi Subrata,
>>> Please accept the patch below.
>>>
>>> Thanks,
>>> Gowri
>>> ---
>>> cgroups: conditionally enable building cgroup tests
>>>
>>> controllers tests gets included into default ltp build if 
>>> "/proc/cgroup"
>>> exists. It stops the ltp build in realtime kernel environment where 
>>> kernel
>>> is new and supports cgroups, but necessary file 
>>> "linux/cgroupstats.h" may not
>>> exist in the base OS (like RHEL5.3). So configure command enables 
>>> the build,
>>> but actual build fails, due to missing header file.
>>>
>>> Below patch proposes new symbol LTP_CHECK_CGROUPSTATS to check for 
>>> header file
>>> "linux/cgroupstats.h" and include controllers in the list of tests 
>>> to build.
>>>
>>> Tested the patch in non-RT as well as RT environment for the changes.
>>>
>>> Signed-off-by: Gowrishankar <gowrishankar.m@in.ibm.com>
>>> Tested-by: Gowrishankar <gowrishankar.m@in.ibm.com>
>>> ---
>>>
>>> ------------------------------------------------------------------------ 
>>>
>>>
>>> Index: ltp-full-20090630/m4/ltp-cgroupstats.m4
>>> ===================================================================
>>> --- /dev/null    1970-01-01 00:00:00.000000000 +0000
>>> +++ ltp-full-20090630/m4/ltp-cgroupstats.m4    2009-07-03 
>>> 13:41:55.000000000 +0530
>>> @@ -0,0 +1,9 @@
>>> +dnl
>>> +dnl LTP_CHECK_CGROUPSTATS
>>> +dnl ----------------------------
>>> +dnl
>>> +AC_DEFUN([LTP_CHECK_CGROUPSTATS],
>>> +[dnl
>>> +AC_CHECK_HEADERS(linux/cgroupstats.h,[LTP_CHECK_CGROUPSTATS_HEADER=yes]) 
>>>
>>> +AC_SUBST(LTP_CHECK_CGROUPSTATS_HEADER)
>>> +])
>>> Index: ltp-full-20090630/configure.ac
>>> ===================================================================
>>> --- ltp-full-20090630.orig/configure.ac    2009-07-03 
>>> 13:59:48.000000000 +0530
>>> +++ ltp-full-20090630/configure.ac    2009-07-03 14:00:14.000000000 
>>> +0530
>>> @@ -21,5 +21,6 @@
>>>  LTP_CHECK_SELINUX
>>>  LTP_CHECK_CRYPTO
>>>  LTP_CHECK_TASKSTATS
>>> +LTP_CHECK_CGROUPSTATS
>>>
>>>  AC_OUTPUT
>>> Index: ltp-full-20090630/testcases/kernel/Makefile
>>> ===================================================================
>>> --- ltp-full-20090630.orig/testcases/kernel/Makefile    2009-07-03 
>>> 14:01:25.000000000 +0530
>>> +++ ltp-full-20090630/testcases/kernel/Makefile    2009-07-03 
>>> 14:02:42.000000000 +0530
>>> @@ -1,6 +1,12 @@
>>> -SUBDIRS = power_management numa containers controllers connectors 
>>> include fs io ipc mem pty sched security syscalls timers
>>> +include ../../config.mk
>>> +
>>> +SUBDIRS = power_management numa containers connectors include fs io 
>>> ipc mem pty sched security syscalls timers
>>>  UCLINUX_SUBDIRS = include syscalls
>>>
>>> +ifeq ($(LTP_CHECK_CGROUPSTATS_HEADER),yes)
>>> +    SUBDIRS+= controllers
>>> +endif
>>> +
>>>  all:
>>>      @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i ; done
>>>
>>>   
>>> ------------------------------------------------------------------------ 
>>>
>>>
>>> ------------------------------------------------------------------------------ 
>>>
>>>   
>>> ------------------------------------------------------------------------ 
>>>
>>>
>>> _______________________________________________
>>> Ltp-list mailing list
>>> Ltp-list@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/ltp-list
>>>   
>>
>
>


------------------------------------------------------------------------------
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list

  reply	other threads:[~2009-07-06 13:15 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-06 10:15 [LTP] [PATCH] cgroups: conditionally enable building cgroup tests gowrishankar
2009-07-06 11:38 ` Francesco RUNDO
2009-07-06 12:00   ` gowrishankar
2009-07-06 12:42     ` Francesco RUNDO [this message]
2009-07-06 12:55       ` Subrata Modak
2009-07-06 13:05         ` Francesco RUNDO
2009-07-06 17:22     ` Garrett Cooper
2009-07-06 17:28   ` Garrett Cooper
2009-07-06 22:06     ` Mike Frysinger
2009-07-07  6:58       ` Francesco RUNDO
2009-07-07 14:24         ` Mike Frysinger
2009-07-08  7:40           ` Francesco RUNDO
2009-07-07  6:53     ` Francesco RUNDO
2009-07-07  9:11       ` Garrett Cooper
2009-07-06 15:51 ` Subrata Modak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A51F13C.3050701@st.com \
    --to=francesco.rundo@st.com \
    --cc=gomuthuk@linux.vnet.ibm.com \
    --cc=ltp-list@lists.sf.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox