From: Miao Xie <miaox@cn.fujitsu.com>
To: subrata@linux.vnet.ibm.com
Cc: LTP-ML <ltp-list@lists.sourceforge.net>, Miao Xie <miaox@cn.fujitsu.com>
Subject: Re: [LTP] [PATCH] Add new testcases for ext4 new features - V3
Date: Mon, 30 Nov 2009 11:28:01 +0800 [thread overview]
Message-ID: <4B133BC1.5020109@cn.fujitsu.com> (raw)
In-Reply-To: <1257170360.4977.58.camel@subratamodak.linux.ibm.com>
Hi, Subrata
I'm sorry. There is something wrong in the patch that I sent on 2009-11-26. So
I made a new patch to instead of it.
And Subrata, I didn't find these failure about online defrag on my box.
The attached patch opens the verbose mode of e4defrag to get more information later, it is
useful to find the problem of online defrag. So, Could you test it again and send the output
info to me?
This patch can fix the following problem:
-- delete the code of setting the test_fs flag
-- open the verbose mode of e4defrag, it is useful to find the problem of online defrag
-- fix some bug of the Makefile
-- throw the utilities version info away
-- delete two unnecessary testcases about ext4 subdir limit test
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
---
testcases/kernel/fs/ext4-new-features/Makefile | 20 ++++++++++----
testcases/kernel/fs/ext4-new-features/README | 7 +----
.../ext4-delalloc-mballoc/ext4-alloc-test.sh | 15 ++++------
.../ext4-inode-version/ext4_get_inode_version.sh | 2 +-
.../ext4-inode-version/ext4_inode_version_test.sh | 10 +++----
.../ext4-journal-checksum/ext4_journal_checksum.sh | 12 ++++----
.../ext4_nsec_timestamps_test.sh | 8 ++---
.../ext4-online-defrag/ext4_online_defrag_test.sh | 28 ++++++++++++-------
.../ext4_persist_prealloc_test.sh | 4 +-
.../ext4-subdir-limit/ext4_subdir_limit_test.sh | 17 +++++++-----
.../ext4-uninit-groups/ext4_uninit_groups_test.sh | 22 +++++++++------
11 files changed, 78 insertions(+), 67 deletions(-)
diff --git a/testcases/kernel/fs/ext4-new-features/Makefile b/testcases/kernel/fs/ext4-new-features/Makefile
index 0e09dd6..208b8a6 100644
--- a/testcases/kernel/fs/ext4-new-features/Makefile
+++ b/testcases/kernel/fs/ext4-new-features/Makefile
@@ -22,17 +22,25 @@ top_srcdir ?= ../../../..
include $(top_srcdir)/include/mk/env_pre.mk
-INSTALL_TARGETS := *.sh
-INSTALL_TARGETS := ext4-test-config
-INSTALL_TARGETS := ffsb-6.0-rc2/ffsb
+INSTALL_TARGETS += ffsb
+INSTALL_TARGETS += run_ext4_test.sh
+INSTALL_TARGETS += ext4_funcs.sh
+INSTALL_TARGETS += ext4-test-config
-FILTER_OUT_DIRS := ffsb-6.0-rc2
+FFSBDIR := ffsb-6.0-rc2
+FILTER_OUT_DIRS := $(FFSBDIR)
+FFSB := $(FFSBDIR)/ffsb
-trunk-all: ffsb-6.0-rc2
+$(FFSB): $(FFSBDIR)
+ $(MAKE) -C $^ -f "$(abs_srcdir)/$^/Makefile" all
+ cp $(FFSBDIR)/ffsb ffsb
+
+trunk-all: $(FFSB)
trunk-clean:: | ffsb-clean
-ffsb-clean:: ffsb-6.0-rc2
+ffsb-clean:: $(FFSBDIR)
$(MAKE) -C $^ -f "$(abs_srcdir)/$^/Makefile" clean
+ rm -rf ffsb
include $(top_srcdir)/include/mk/generic_trunk_target.mk
diff --git a/testcases/kernel/fs/ext4-new-features/README b/testcases/kernel/fs/ext4-new-features/README
index 0ea0460..bda16e5 100644
--- a/testcases/kernel/fs/ext4-new-features/README
+++ b/testcases/kernel/fs/ext4-new-features/README
@@ -9,7 +9,7 @@ with increasing disk capacities and state-of-the-art feature requirements. More
extensive information of ext4 can be found at the ext4 wiki site at the URL:
http://ext4.wiki.kernel.org
-There are total 119 testcases for ext4 new features test that have been added.
+There are total 117 testcases for ext4 new features test that have been added.
Now, these testcases can test multi-block alloc/delayed alloc, inode version
field on disk, journal checksumming, nanosec timestamps, online defrag, persist
prealloc, subdirectory limit and uninit groups of ext4.
@@ -111,11 +111,6 @@ Directory containing the shell script which is used to test subdirectory limit
of ext4. According to the kernel documentation, we create more than 32000
subdirectorys on the ext4 filesystem.
-But, when then block size is small, such as 1024, and the name of every
-subdirectory is very long, such as every name is 255 bytes, we can just create
-less than 20000 subdirectory. In this test suite, there is two FAIL cases by
-reason of it.
-
ext4-uninit-groups
------------------
Directory containing the shell script which is used to test uninitialized groups
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-delalloc-mballoc/ext4-alloc-test.sh b/testcases/kernel/fs/ext4-new-features/ext4-delalloc-mballoc/ext4-alloc-test.sh
index ec2f389..be7b074 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-delalloc-mballoc/ext4-alloc-test.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-delalloc-mballoc/ext4-alloc-test.sh
@@ -37,14 +37,12 @@ read_config $1
# Case 17: mount ext4 partition to ext3
ext4_test_remount()
{
- mkfs.ext3 -I 256 -b 1024 $EXT4_DEV > /dev/null
+ mkfs.ext3 -I 256 -b 1024 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
- tune2fs -E test_fs $EXT4_DEV
-
mount -t ext4 -o delalloc,auto_da_alloc $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to mount ext4 filesystem"
@@ -71,7 +69,7 @@ ext4_test_remount()
fi
umount mnt_point
- fsck -p $EXT4_DEV
+ fsck -p $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "fsck returned failure"
return 1
@@ -87,16 +85,15 @@ ext4_test_remount()
# $4: auto_da_alloc
ext4_test_delalloc_mballoc()
{
- tst_resm TINFO "isDelalloc: $1, isDirectIO: $2, Blocksize: $3, \
- isAuto_da_alloc: $4"
+ tst_resm TINFO "isDelalloc: $1, isDirectIO: $2, Blocksize: $3, isAuto_da_alloc: $4"
- mkfs.ext4 -I 256 -b $3 /$EXT4_DEV > /dev/null
+ mkfs.ext4 -I 256 -b $3 /$EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
- tune2fs -E test_fs -O extents $EXT4_DEV
+ tune2fs -O extents $EXT4_DEV &> /dev/null
mount -t ext4 -o $1,$4 $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
@@ -117,7 +114,7 @@ ext4_test_delalloc_mballoc()
return 1
fi
- fsck -p $EXT4_DEV
+ fsck -p $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "fsck returned failure"
return 1
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-inode-version/ext4_get_inode_version.sh b/testcases/kernel/fs/ext4-new-features/ext4-inode-version/ext4_get_inode_version.sh
index 8f5c907..0e7a8b6 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-inode-version/ext4_get_inode_version.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-inode-version/ext4_get_inode_version.sh
@@ -24,7 +24,7 @@
#$2: 1 - return inode version by return value
# !1 - writting inode version to stddev
-inode_version=`debugfs -R "stat $1" $EXT4_DEV | grep 'Version' | awk '{
+inode_version=`debugfs -R "stat $1" $EXT4_DEV 2> /dev/null | grep 'Version' | awk '{
print $NF }'`
# The inode_version's format: '0x0000000a' or '0x00000000:0000000a',
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-inode-version/ext4_inode_version_test.sh b/testcases/kernel/fs/ext4-new-features/ext4-inode-version/ext4_inode_version_test.sh
index f27248b..4a58b36 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-inode-version/ext4_inode_version_test.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-inode-version/ext4_inode_version_test.sh
@@ -41,13 +41,13 @@ ext4_test_128_inode_version()
{
tst_resm TINFO "Test inode version is 32 bits with 128 inode size"
- mkfs.ext4 -I 128 $EXT4_DEV > /dev/null
+ mkfs.ext4 -I 128 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
- tune2fs -E test_fs -O extents $EXT4_DEV
+ tune2fs -O extents $EXT4_DEV &> /dev/null
mount -t ext4 -o i_version $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
@@ -67,7 +67,7 @@ ext4_test_128_inode_version()
fi
# inode version is 32 bits: 0x00000000
- version=`debugfs $EXT4_DEV -R "stat tmp_file" | grep 'Version'`
+ version=`debugfs $EXT4_DEV -R "stat tmp_file" 2> /dev/null | grep 'Version'`
version=`echo $version | awk '{ print $NF }'`
version=`echo $version | sed 's/^0x//'`
len=${#version}
@@ -91,14 +91,12 @@ ext4_test_128_inode_version()
# $1: file operation
test_inode_version()
{
- mkfs.ext3 -I 256 $EXT4_DEV > /dev/null
+ mkfs.ext3 -I 256 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
- tune2fs -E test_fs $EXT4_DEV > /dev/null
-
mount -t ext4 -o i_version $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to mount ext4 filesystem"
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-journal-checksum/ext4_journal_checksum.sh b/testcases/kernel/fs/ext4-new-features/ext4-journal-checksum/ext4_journal_checksum.sh
index 550afa1..eb72b5d 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-journal-checksum/ext4_journal_checksum.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-journal-checksum/ext4_journal_checksum.sh
@@ -59,17 +59,17 @@ ext4_test_journal_checksum()
async_commit="Used"
fi
- tst_resm TINFO "journal mode: $1, commit interval: $2, \
- journal_checksum: $checksum, \
- journal_async_commit: $async_commit, barrier: $5"
+ tst_resm TINFO "journal mode: $1, commit interval: $2, " \
+ "journal_checksum: $checksum, " \
+ "journal_async_commit: $async_commit, barrier: $5"
- mkfs.ext4 -I 256 $EXT4_DEV > /dev/null
+ mkfs.ext4 -I 256 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
- tune2fs -E test_fs -O extents $EXT4_DEV
+ tune2fs -O extents $EXT4_DEV &> /dev/null
mount -t ext4 -o data=$1,commit=$2,$3,$4,barrier=$5 $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
@@ -90,7 +90,7 @@ ext4_test_journal_checksum()
return 1
fi
- e2fsck -p $EXT4_DEV
+ e2fsck -p $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "fsck returned failure"
return 1
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-nsec-timestamps/ext4_nsec_timestamps_test.sh b/testcases/kernel/fs/ext4-new-features/ext4-nsec-timestamps/ext4_nsec_timestamps_test.sh
index ced6576..cc00507 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-nsec-timestamps/ext4_nsec_timestamps_test.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-nsec-timestamps/ext4_nsec_timestamps_test.sh
@@ -41,13 +41,13 @@ ext4_test_sec_timestamps()
{
tst_resm TINFO "Test timestamps with 128 inode size"
- mkfs.ext4 -I 128 $EXT4_DEV > /dev/null
+ mkfs.ext4 -I 128 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
- tune2fs -E test_fs -O extents $EXT4_DEV
+ tune2fs -O extents $EXT4_DEV &> /dev/null
mount -t ext4 $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
@@ -82,14 +82,12 @@ ext4_test_nsec_timestamps()
{
tst_resm TINFO "Test timestamps with 256 inode size"
- mkfs.ext3 -I 256 $EXT4_DEV > /dev/null
+ mkfs.ext3 -I 256 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
- tune2fs -E test_fs $EXT4_DEV
-
mount -t ext4 $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to mount ext4 filesystem"
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-online-defrag/ext4_online_defrag_test.sh b/testcases/kernel/fs/ext4-new-features/ext4-online-defrag/ext4_online_defrag_test.sh
index 84613c8..7b4dda3 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-online-defrag/ext4_online_defrag_test.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-online-defrag/ext4_online_defrag_test.sh
@@ -94,23 +94,23 @@ my_e4defrag()
{
if [ $1 -eq $FILE ]; then
if [ $2 -eq $SMALL ]; then
- ./e4defrag mnt_point/data0/
+ ./e4defrag -v mnt_point/data0/
return $?
# EMPTY or LARGE
else
- ./e4defrag mnt_point/tmp_file
+ ./e4defrag -v mnt_point/tmp_file
return $?
fi
elif [ $1 -eq $DIR ]; then
if [ $2 -eq $SMALL ]; then
- ./e4defrag mnt_point/data0/
+ ./e4defrag -v mnt_point/data0/
return $?
else
- ./e4defrag mnt_point/tmp_dir
+ ./e4defrag -v mnt_point/tmp_dir
return $?
fi
else
- ./e4defrag $EXT4_DEV
+ ./e4defrag -v $EXT4_DEV
return $?
fi
}
@@ -121,15 +121,20 @@ my_e4defrag()
# $3: block size
ext4_test_online_defrag()
{
+ echo Test $TST_COUNT start >> \
+ $LTPROOT/output/ext4_online_defrag_result.txt
+
tst_resm TINFO "defrag type: $1, defrag obj: $2, block size: $3"
- mkfs.ext4 -m 0 -b $3 -O ^flex_bg $EXT4_DEV > /dev/null
+ mkfs.ext4 -m 0 -b $3 -O ^flex_bg $EXT4_DEV >> \
+ $LTPROOT/output/ext4_online_defrag_result.txt 2>&1
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
- tune2fs -E test_fs -O extents $EXT4_DEV
+ tune2fs -O extents $EXT4_DEV >> \
+ $LTPROOT/output/ext4_online_defrag_result.txt 2>&1
mount -t ext4 -o nodelalloc $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
@@ -137,7 +142,7 @@ ext4_test_online_defrag()
return 1
fi
- age_filesystem $2 $1
+ age_filesystem $2 $1 >> $LTPROOT/output/ext4_online_defrag_result.txt 2>&1
my_e4defrag $1 $2 >> $LTPROOT/output/ext4_online_defrag_result.txt
if [ $? -ne 0 ]; then
@@ -152,18 +157,21 @@ ext4_test_online_defrag()
return 1
fi
- e2fsck -p $EXT4_DEV
+ e2fsck -p $EXT4_DEV >> \
+ $LTPROOT/output/ext4_online_defrag_result.txt 2>&1
if [ $? -ne 0 ]; then
tst_resm TFAIL "fsck returned failure"
return 1
fi
- tst_resm TPASS "ext4 online defrag test pass(defrag type: $1, Aging: $2, block size: $3)"
+ tst_resm TPASS "ext4 online defrag test pass"
}
# main
ext4_setup
+rm -f $LTPROOT/output/ext4_online_defrag_result.txt
+
DEFRAG=( $FILE $DIR $FILESYSTEM )
AGING=( $EMPTY $SMALL $LARGE )
BLOCK_SIZE=( 1024 4096 )
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-persist-prealloc/ext4_persist_prealloc_test.sh b/testcases/kernel/fs/ext4-new-features/ext4-persist-prealloc/ext4_persist_prealloc_test.sh
index 0d293e8..e895d25 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-persist-prealloc/ext4_persist_prealloc_test.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-persist-prealloc/ext4_persist_prealloc_test.sh
@@ -43,7 +43,7 @@ export TDIRECTORY=$PWD/mnt_point/
# $1: 1024 or 4096
ext4_test_persist_prealloc()
{
- mkfs.ext4 -I 256 -b $1 $EXT4_DEV > /dev/null
+ mkfs.ext4 -I 256 -b $1 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
@@ -81,7 +81,7 @@ ext4_test_persist_prealloc()
return 1
fi
- e2fsck -p $EXT4_DEV
+ e2fsck -p $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "fsck returned failure"
return 1
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-subdir-limit/ext4_subdir_limit_test.sh b/testcases/kernel/fs/ext4-new-features/ext4-subdir-limit/ext4_subdir_limit_test.sh
index 42c4336..5631fe5 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-subdir-limit/ext4_subdir_limit_test.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-subdir-limit/ext4_subdir_limit_test.sh
@@ -28,7 +28,7 @@ cd $LTPROOT/testcases/bin
. ./ext4_funcs.sh
export TCID="ext4-subdir-limit"
-export TST_TOTAL=12
+export TST_TOTAL=10
export TST_COUNT=1
# $1: the test config
@@ -59,20 +59,20 @@ ext4_run_case()
dir_name_len="long name"
fi
- tst_resm TINFO "Num of dirs to create: $1, Dir name len: $dir_name_len \
- Parent dir: $3, Block size: $4"
+ tst_resm TINFO "Num of dirs to create: $1, Dir name len: $dir_name_len, " \
+ "Parent dir: $3, Block size: $4"
# only mkfs if block size has been changed,
# or previous case failed
if [ $prev_result -ne $PASS -o $4 -ne $prev_block_size ]; then
- mkfs.ext4 -b $4 -I 256 $EXT4_DEV > /dev/null
+ mkfs.ext4 -b $4 -I 256 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
fi
prev_block_size=$4
- tune2fs -E test_fs -O extents $EXT4_DEV
+ tune2fs -O extents $EXT4_DEV &> /dev/null
fi
prev_result=$FAIL
@@ -120,14 +120,14 @@ ext4_run_case()
fi
# run fsck to make sure the filesystem has no errors
- e2fsck -p $EXT4_DEV
+ e2fsck -p $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "fsck: the filesystem has errors"
return 1
fi
# check dir_nlink is set
- dumpe2fs $EXT4_DEV | grep '^Filesystem features' | grep -q dir_nlink
+ dumpe2fs $EXT4_DEV 2> /dev/null | grep '^Filesystem features' | grep -q dir_nlink
if [ $? -ne 0 ]; then
tst_resm TFAIL "feature dir_nlink is not set"
return 1
@@ -152,6 +152,9 @@ for ((i = 0; i < 3; i++))
{
for ((k = 0; k < 2; k++))
{
+ if [ $i -eq $LONG_DIR -a $k -eq 1024 ]; then
+ continue
+ fi
ext4_run_case 65537 ${DIR_LEN[$k]} ${PARENT_DIR[$j]} \
${BLOCK_SIZE[$i]}
if [ $? -ne 0 ]; then
diff --git a/testcases/kernel/fs/ext4-new-features/ext4-uninit-groups/ext4_uninit_groups_test.sh b/testcases/kernel/fs/ext4-new-features/ext4-uninit-groups/ext4_uninit_groups_test.sh
index 27cbb5f..b479c8f 100755
--- a/testcases/kernel/fs/ext4-new-features/ext4-uninit-groups/ext4_uninit_groups_test.sh
+++ b/testcases/kernel/fs/ext4-new-features/ext4-uninit-groups/ext4_uninit_groups_test.sh
@@ -40,8 +40,8 @@ LARGE=3
# filesystem free size in bytes: blocks_size * free_blocks
filesystem_free_size()
{
- bsize=`dumpe2fs -h $EXT4_DEV | grep 'Block size' | awk '{ print $2 }'`
- blocks=`dumpe2fs -h $EXT4_DEV | grep 'Free blocks'| awk '{ print $2 }'`
+ bsize=`dumpe2fs -h $EXT4_DEV 2> /dev/null | grep 'Block size' | awk '{ print $2 }'`
+ blocks=`dumpe2fs -h $EXT4_DEV 2> /dev/null | grep 'Free blocks'| awk '{ print $2 }'`
echo $bsize * $blocks
}
@@ -61,9 +61,9 @@ age_filesystem()
}
elif [ $1 -eq $LARGE ]; then
rm -rf mnt_point/*
- bsize=`dumpe2fs -h $EXT4_DEV | grep 'Block size'`
+ bsize=`dumpe2fs -h $EXT4_DEV 2> /dev/null | grep 'Block size'`
bsize=`echo $bsize | awk '{ print $3 }'`
- bcount=`dumpe2fs -h $EXT4_DEV | grep 'Free blocks'`
+ bcount=`dumpe2fs -h $EXT4_DEV 2> /dev/null | grep 'Free blocks'`
bcount=`echo $bcount | awk '{ print $3 }'`
dd if=/dev/zero of=mnt_point/tmp_dir bs=$bsize count=$bcount
else
@@ -80,7 +80,9 @@ age_filesystem()
# $4: age filesystem: $EMPTY, $SMALL, $LARGE
ext4_test_uninit_groups()
{
- mkfs.ext4 -I 256 -m 0 $EXT4_DEV > /dev/null
+ echo "Test $TST_COUNT" >> $LTPROOT/output/ext4_uninit_groups_result.txt
+
+ mkfs.ext4 -I 256 -m 0 $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "failed to create ext4 filesystem"
return 1
@@ -92,10 +94,10 @@ ext4_test_uninit_groups()
flag=$3
fi
- tune2fs -E test_fs -O extents,uninit_groups,$flag $EXT4_DEV
+ tune2fs -O extents,uninit_groups,$flag $EXT4_DEV &> /dev/null
# Must run fsck after setting uninit_groups
- fsck -p $EXT4_DEV > /dev/null
+ fsck -p $EXT4_DEV &> /dev/null
mount -t ext4 -o $1,$2 $EXT4_DEV mnt_point
if [ $? -ne 0 ]; then
@@ -103,7 +105,7 @@ ext4_test_uninit_groups()
return 1
fi
- age_filesystem $4
+ age_filesystem $4 >> $LTPROOT/output/ext4_uninit_groups_result.txt 2>&1
if [ $? -ne 0 ]; then
tst_resm TFAIL "age filesystem failed"
umount mnt_point
@@ -116,7 +118,7 @@ ext4_test_uninit_groups()
return 1
fi
- fsck -p $EXT4_DEV
+ fsck -p $EXT4_DEV &> /dev/null
if [ $? -ne 0 ]; then
tst_resm TFAIL "fsck returned failure"
return 1
@@ -135,6 +137,8 @@ AGING=( $EMPTY $SMALL $LARGE )
RET=0
+rm -f $LTPROOT/output/ext4_uninit_groups_result.txt
+
for ((i = 0; i < 2; i++))
{
for ((j = 0; j < 2; j++))
--
1.6.5.2
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next prev parent reply other threads:[~2009-11-30 3:24 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-26 7:12 [LTP] [PATCH] Add new testcases for ext4 new features - V3 Miao Xie
2009-10-26 7:28 ` Miao Xie
2009-10-26 8:29 ` Subrata Modak
2009-10-26 13:26 ` Subrata Modak
2009-10-26 13:26 ` Subrata Modak
2009-10-26 22:15 ` Andreas Dilger
2009-10-27 13:35 ` Subrata Modak
2009-10-29 18:31 ` Subrata Modak
2009-11-02 13:59 ` Subrata Modak
2009-11-26 12:02 ` Miao Xie
2009-12-03 15:11 ` Subrata Modak
2009-12-04 10:04 ` Miao Xie
2009-12-07 11:53 ` Subrata Modak
2009-12-08 5:59 ` Miao Xie
2009-12-09 12:13 ` Subrata Modak
2009-11-30 3:28 ` Miao Xie [this message]
2009-11-30 9:39 ` Miao Xie
2009-11-30 10:01 ` Garrett Cooper
2009-11-03 2:47 ` Miao Xie
2009-11-09 17:39 ` Subrata Modak
-- strict thread matches above, loose matches on Subject: below --
2009-12-07 13:29 naresh kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B133BC1.5020109@cn.fujitsu.com \
--to=miaox@cn.fujitsu.com \
--cc=ltp-list@lists.sourceforge.net \
--cc=subrata@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox