From: Peng Haitao <penght@cn.fujitsu.com>
To: Garrett Cooper <yanegomi@gmail.com>
Cc: "ltp-list@lists.sourceforge.net" <ltp-list@lists.sourceforge.net>
Subject: Re: [LTP] [PATCH v4] aio_read:8-1.c: Forget initializing struct aiocb before using it
Date: Fri, 16 Mar 2012 18:07:31 +0800 [thread overview]
Message-ID: <4F6310E3.2000403@cn.fujitsu.com> (raw)
In-Reply-To: <42CC829C-0CD7-4CDB-A713-80BE6DA95EC5@gmail.com>
Garrett Cooper said the following on 2012-3-16 17:48:
> On Mar 16, 2012, at 1:04 AM, Wanlong Gao <gaowanlong@cn.fujitsu.com> wrote:
>
>> On 03/16/2012 03:58 PM, Peng Haitao wrote:
>>
>>> There are 2 changes in this patch.
>>> 1. Initialize the aiocb struct before using it.
>>> 2. If Prioritized Input and Output option is supported, submit the
>>> aiocb with invalid aio_reqprio, else submit the aiocb with invalid
>>> aio_fildes
>>>
>>> Signed-off-by: Peng Haitao <penght@cn.fujitsu.com>
>>
>>
>> Looks good to me , Cyril?
>
> Why not always set fildes == -1 and test that way?
>
When Prioritized Input and Output option is supported,and aio_fildes is
set -1, the aio_read() will success:( Only aiocb.aio_reqprio is set -1,
the aio_read() will fail.
When Prioritized Input and Output option is not supported,and aio_fildes
is set -1, the result of aio_read() is not tested.
But I think it is wrong when aio_fildes is set -1.
--
Best Regards,
Peng
>>> .../conformance/interfaces/aio_read/8-1.c | 14 ++++++++------
>>> .../conformance/interfaces/aio_write/6-1.c | 16 +++++++++-------
>>> 2 files changed, 17 insertions(+), 13 deletions(-)
>>>
>>> diff --git a/testcases/open_posix_testsuite/conformance/interfaces/aio_read/8-1.c b/testcases/open_posix_testsuite/conformance/interfaces/aio_read/8-1.c
>>> index 8054eeb..009aeb2 100644
>>> --- a/testcases/open_posix_testsuite/conformance/interfaces/aio_read/8-1.c
>>> +++ b/testcases/open_posix_testsuite/conformance/interfaces/aio_read/8-1.c
>>> @@ -14,7 +14,9 @@
>>> *
>>> * method:
>>> *
>>> - * - fill in an aiocb with a NULL aio_buf
>>> + * - if Prioritized Input and Output option is supported, fill in an
>>> + * aiocb with invalid aio_reqprio, else submit the aiocb with invalid
>>> + * aio_fildes
>>> * - call aio_read
>>> * - check aio_read return value
>>> */
>>> @@ -41,11 +43,11 @@ int main()
>>> if (sysconf(_SC_ASYNCHRONOUS_IO) < 200112L)
>>> return PTS_UNSUPPORTED;
>>>
>>> - /* submit a request with a NULL buffer */
>>> - aiocb.aio_fildes = 0;
>>> - aiocb.aio_buf = NULL;
>>> - aiocb.aio_nbytes = 0;
>>> - aiocb.aio_offset = 0;
>>> + memset(&aiocb, 0, sizeof(struct aiocb));
>>> + if (sysconf(_SC_PRIORITIZED_IO) < 200112L)
>>> + aiocb.aio_fildes = -1;
>>> + else
>>> + aiocb.aio_reqprio = -1;
>>>
>>> if (aio_read(&aiocb) != -1) {
>>> printf(TNAME " aio_read() should fail!\n");
>>> diff --git a/testcases/open_posix_testsuite/conformance/interfaces/aio_write/6-1.c b/testcases/open_posix_testsuite/conformance/interfaces/aio_write/6-1.c
>>> index 98b8d0d..9234fe6 100644
>>> --- a/testcases/open_posix_testsuite/conformance/interfaces/aio_write/6-1.c
>>> +++ b/testcases/open_posix_testsuite/conformance/interfaces/aio_write/6-1.c
>>> @@ -14,7 +14,9 @@
>>> *
>>> * method:
>>> *
>>> - * - fill in an aiocb with a NULL aio_buf
>>> + * - if Prioritized Input and Output option is supported, fill in an
>>> + * aiocb with invalid aio_reqprio, else submit the aiocb with invalid
>>> + * aio_fildes
>>> * - call aio_write
>>> * - check aio_write return value
>>> *
>>> @@ -42,11 +44,11 @@ int main()
>>> if (sysconf(_SC_ASYNCHRONOUS_IO) < 200112L)
>>> return PTS_UNSUPPORTED;
>>>
>>> - /* submit a request with a NULL buffer */
>>> - aiocb.aio_fildes = 0;
>>> - aiocb.aio_buf = NULL;
>>> - aiocb.aio_nbytes = 0;
>>> - aiocb.aio_offset = 0;
>>> + memset(&aiocb, 0, sizeof(struct aiocb));
>>> + if (sysconf(_SC_PRIORITIZED_IO) < 200112L)
>>> + aiocb.aio_fildes = -1;
>>> + else
>>> + aiocb.aio_reqprio = -1;
>>>
>>> if (aio_write(&aiocb) != -1)
>>> {
>>> @@ -62,4 +64,4 @@ int main()
>>>
>>> printf ("Test PASSED\n");
>>> return PTS_PASS;
>>> -}
>>> \ No newline at end of file
>>> +}
>>
>>
>>
>> ------------------------------------------------------------------------------
>> This SF email is sponsosred by:
>> Try Windows Azure free for 90 days Click Here
>> http://p.sf.net/sfu/sfd2d-msazure
>> _______________________________________________
>> Ltp-list mailing list
>> Ltp-list@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/ltp-list
>
>
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next prev parent reply other threads:[~2012-03-16 10:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4F62A9E1.2040502@cn.fujitsu.com>
[not found] ` <1331884731-11231-1-git-send-email-penght@cn.fujitsu.com>
[not found] ` <4F62F3F8.5080707@cn.fujitsu.com>
2012-03-16 9:48 ` [LTP] [PATCH v4] aio_read:8-1.c: Forget initializing struct aiocb before using it Garrett Cooper
2012-03-16 10:07 ` Peng Haitao [this message]
2012-03-21 8:43 ` [LTP] [PATCH v5] " Peng Haitao
2012-03-21 8:45 ` Wanlong Gao
2012-03-22 13:07 ` Wanlong Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F6310E3.2000403@cn.fujitsu.com \
--to=penght@cn.fujitsu.com \
--cc=ltp-list@lists.sourceforge.net \
--cc=yanegomi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox