public inbox for ltp@lists.linux.it
 help / color / mirror / Atom feed
From: Wanlong Gao <gaowanlong@cn.fujitsu.com>
To: Zhouping Liu <zliu@redhat.com>
Cc: LTP List <ltp-list@lists.sourceforge.net>
Subject: Re: [LTP] [PATCH v3 6/7] mm/oom05: new testcase
Date: Tue, 19 Mar 2013 11:12:58 +0800	[thread overview]
Message-ID: <5147D7BA.6030100@cn.fujitsu.com> (raw)
In-Reply-To: <58ec015e0776d3acf326aff30a1ea2cac88d3b08.1363579539.git.zliu@redhat.com>

On 03/18/2013 12:14 PM, Zhouping Liu wrote:
> added a new case to test OOM under the combination
> of MEMCG and CPUSET.
> 
> Signed-off-by: Zhouping Liu <zliu@redhat.com>
> ---
>  runtest/mm                       |   1 +
>  testcases/kernel/mem/oom/oom05.c | 147 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 148 insertions(+)
>  create mode 100644 testcases/kernel/mem/oom/oom05.c
> 
> diff --git a/runtest/mm b/runtest/mm
> index a8bd605..56b83f8 100644
> --- a/runtest/mm
> +++ b/runtest/mm
> @@ -77,6 +77,7 @@ oom01 oom01
>  oom02 oom02
>  oom03 oom03
>  oom04 oom04
> +oom05 oom05
>  
>  swapping01 swapping01 -i 5
>  
> diff --git a/testcases/kernel/mem/oom/oom05.c b/testcases/kernel/mem/oom/oom05.c
> new file mode 100644
> index 0000000..0176d42
> --- /dev/null
> +++ b/testcases/kernel/mem/oom/oom05.c
> @@ -0,0 +1,147 @@
> +/*
> + * Out Of Memory (OOM) for MEMCG and CPUSET
> + *
> + * The program is designed to cope with unpredictable like amount and
> + * system physical memory, swap size and other VMM technology like KSM,
> + * memcg, memory hotplug and so on which may affect the OOM
> + * behaviours. It simply increase the memory consumption 3G each time
> + * until all the available memory is consumed and OOM is triggered.
> + *
> + * Copyright (C) 2013  Red Hat, Inc.
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of version 2 of the GNU General Public
> + * License as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it would be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + *
> + * Further, this software is distributed without any warranty that it
> + * is free of the rightful claim of any third person regarding
> + * infringement or the like.  Any license provided herein, whether
> + * implied or otherwise, applies only to this software file.  Patent
> + * licenses, if any, provided herein do not apply to combinations of
> + * this program with other software, or any other product whatsoever.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> + * 02110-1301, USA.
> + */
> +
> +#include "config.h"
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <stdio.h>
> +#include "numa_helper.h"
> +#include "test.h"
> +#include "usctest.h"
> +#include "mem.h"
> +
> +char *TCID = "oom05";
> +int TST_TOTAL = 1;
> +
> +#if HAVE_NUMA_H && HAVE_LINUX_MEMPOLICY_H && HAVE_NUMAIF_H \
> +	&& HAVE_MPOL_CONSTANTS
> +
> +int main(int argc, char *argv[])
> +{
> +	char *msg;
> +	int lc;
> +	int swap_acc_on = 1;
> +	char mem[BUFSIZ];
> +
> +	msg = parse_opts(argc, argv, NULL, NULL);
> +	if (msg != NULL)
> +		tst_brkm(TBROK, NULL, "OPTION PARSING ERROR - %s", msg);
> +
> +#if __WORDSIZE == 32
> +	tst_brkm(TCONF, NULL, "test is not designed for 32-bit system.");
> +#endif
> +
> +	setup();
> +
> +	for (lc = 0; TEST_LOOPING(lc); lc++) {
> +		tst_count = 0;
> +
> +		tst_resm(TINFO, "OOM on CPUSET & MEMCG...");
> +		testoom(0, 0);
> +
> +		/*
> +		 * Under NUMA system, the migration of cpuset's memory
> + 		 * is in charge of cpuset.memory_migrate, we can write

This line has a space before tab warning.
If you should respin the patchset, please fix it, otherwise I can
fix it by hand when applying the patch.


Thanks,
Wanlong Gao

> +		 * 1 to cpuset.memory_migrate to enable the migration.
> +		 */
> +		if (is_numa(cleanup)) {
> +			write_cpuset_files(CPATH_NEW, "memory_migrate", "1");
> +			tst_resm(TINFO, "OOM on CPUSET & MEMCG with "
> +					"cpuset.memory_migrate=1");
> +			testoom(0, 0);
> +		}
> +
> +		if (access(MEMCG_SW_LIMIT, F_OK) == -1) {
> +			if (errno == ENOENT) {
> +				tst_resm(TCONF,
> +					 "memcg swap accounting is disabled");
> +				swap_acc_on = 0;
> +			} else
> +				tst_brkm(TBROK|TERRNO, cleanup, "access");
> +		}
> +
> +		if (swap_acc_on) {
> +			tst_resm(TINFO, "OOM on CPUSET & MEMCG with "
> +					"special memswap limitation:");
> +			snprintf(mem, BUFSIZ, "%ld", TESTMEM);
> +			write_file(MEMCG_SW_LIMIT, mem);
> +			testoom(0, 0);
> +
> +			tst_resm(TINFO, "OOM on CPUSET & MEMCG with "
> +					"disabled memswap limitation:");
> +			write_file(MEMCG_SW_LIMIT, "-1");
> +			testoom(0, 0);
> +		}
> +	}
> +
> +	cleanup();
> +	tst_exit();
> +}
> +
> +void setup(void)
> +{
> +	tst_require_root(NULL);
> +	tst_sig(FORK, DEF_HANDLER, cleanup);
> +	TEST_PAUSE;
> +
> +	mount_mem("memcg", "cgroup", "memory", MEMCG_PATH, MEMCG_PATH_NEW);
> +	mount_mem("cpuset", "cpuset", NULL, CPATH, CPATH_NEW);
> +	write_memcg();
> +
> +	set_sys_tune("overcommit_memory", 1, 1);
> +
> +	if (is_numa(cleanup))
> +		/* For NUMA system, using the first node for cpuset.mems */
> +		write_cpusets(get_a_numa_node(cleanup));
> +	else
> +		/* For nonNUMA system, using node0 for cpuset.mems */
> +		write_cpusets(0);
> +
> +	overcommit = get_sys_tune("overcommit_memory");
> +}
> +
> +void cleanup(void)
> +{
> +	set_sys_tune("overcommit_memory", overcommit, 0);
> +	umount_mem(CPATH, CPATH_NEW);
> +	umount_mem(MEMCG_PATH, MEMCG_PATH_NEW);
> +
> +	TEST_CLEANUP;
> +}
> +
> +#else /* no NUMA */
> +int main(void)
> +{
> +	tst_brkm(TCONF, NULL, "no NUMA development packages installed.");
> +}
> +#endif
> 


------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list

  reply	other threads:[~2013-03-19  3:11 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-18  4:13 [LTP] [PATCH v3 0/7] mm/oom: extend the coverage of OOM Zhouping Liu
2013-03-18  4:13 ` [LTP] [PATCH v3 1/7] lib/mem: modified _gather_cpus() as _gather_node_cpus() Zhouping Liu
2013-03-18  4:13 ` [LTP] [PATCH v3 2/7] mm/oom02: modified 'OOM for NUMA' as 'OOM for mempolicy' Zhouping Liu
2013-03-18  4:14 ` [LTP] [PATCH v3 3/7] numa_helper: added a new function is_numa() Zhouping Liu
2013-03-18  4:14 ` [LTP] [PATCH v3 4/7] mm/oom0[3|4]: added 'OOM for CPUSET' and moved 'OOM with MEMCG & numa' to oom03 Zhouping Liu
2013-03-19  3:10   ` Wanlong Gao
2013-03-19  3:30     ` Zhouping Liu
2013-03-18  4:14 ` [LTP] [PATCH v3 5/7] lib/mem: updated testoom() and oom() funcs Zhouping Liu
2013-03-18  4:14 ` [LTP] [PATCH v3 6/7] mm/oom05: new testcase Zhouping Liu
2013-03-19  3:12   ` Wanlong Gao [this message]
2013-03-18  4:14 ` [LTP] [PATCH v3 7/7] lib/mem: removed the prefix underscore '_' of the internal function name Zhouping Liu
2013-03-19  3:13 ` [LTP] [PATCH v3 0/7] mm/oom: extend the coverage of OOM Wanlong Gao
2013-03-20  9:56 ` Wanlong Gao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5147D7BA.6030100@cn.fujitsu.com \
    --to=gaowanlong@cn.fujitsu.com \
    --cc=ltp-list@lists.sourceforge.net \
    --cc=zliu@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox