* [LTP] [PATCH] testscripts/test_fs_bind.sh: adapt to system which marks mount point as "shared" defaultly
@ 2013-04-09 7:30 DAN LI
2013-04-09 7:57 ` [LTP] [PATCHv2] " DAN LI
0 siblings, 1 reply; 3+ messages in thread
From: DAN LI @ 2013-04-09 7:30 UTC (permalink / raw)
To: LTP list
Linux kernel does not allow to move a mount residing under a
shared mount.
This patch tries to make sure test cases of "move" run under
a private mount.
Signed-off-by: DAN LI <li.dan@cn.fujitsu.com>
---
testscripts/test_fs_bind.sh | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/testscripts/test_fs_bind.sh b/testscripts/test_fs_bind.sh
index 92c51a1..5817174 100755
--- a/testscripts/test_fs_bind.sh
+++ b/testscripts/test_fs_bind.sh
@@ -107,6 +107,18 @@ test_prereqs()
exit -1
fi
+ mount --bind "${sandbox}" "${sandbox}" >& /dev/null
+ if [ $? -ne 0 ]; then
+ tst_brkm TBROK true "$0: failed to perform bind mount on directory \"${sandbox}\""
+ exit 1
+ fi
+
+ mount --make-private "${sandbox}" >& /dev/null
+ if [ $? -ne 0 ]; then
+ tst_brkm TBROK true "$0: failed to make private mountpoint on directory \"${sandbox}\""
+ exit 1
+ fi
+
local mnt_bind=1
local mnt_move=1
@@ -153,17 +165,11 @@ test_prereqs()
tst_resm TINFO "$0: kernel >= 2.6.15 detected -- continuing"
fi
- mount --bind "${sandbox}" "${sandbox}" && {
- mount --make-shared "${sandbox}" > /dev/null 2>&1 || "${FS_BIND_ROOT}/bin/smount" "${sandbox}" shared
- umount "${sandbox}" || {
- tst_resm TFAIL "$0: failed to umount simplest shared subtree"
- exit 1
- }
- } || {
- tst_brkm TBROK true "$0: failed to perform bind mount"
+ mount --make-shared "${sandbox}" > /dev/null 2>&1 || "${FS_BIND_ROOT}/bin/smount" "${sandbox}" shared
+ umount "${sandbox}" || {
+ tst_resm TFAIL "$0: failed to umount simplest shared subtree"
exit 1
}
-
tst_resm TPASS "$0: umounted simplest shared subtree"
}
@@ -428,6 +434,9 @@ run_test()
save_sandbox "$tname" "$resdir/$tname" || do_break=1
save_mounts "$tname" "$resdir/$tname" || do_break=1
save_proc_mounts "$tname" "$resdir/$tname" || do_break=1
+ mount --bind "${sandbox}" "${sandbox}" >& /dev/null || do_break=1
+ mount --make-private "${sandbox}" >& /dev/null || do_break=1
+
if [ $do_break -eq 1 ]; then
tst_brkm TBROK true "$tname: failed to save pre-test state of \"${sandbox}\""
return 2
@@ -453,6 +462,7 @@ run_test()
#echo "SUCCEEDED"
((nsucceeded++))
fi
+ umount -l "${sandbox}" >& /dev/null
check_proc_mounts "$tname" "$resdir/$tname" || \
restore_proc_mounts "$tname" "$resdir/$tname" || do_break=1
check_mounts "$tname" "$resdir/$tname" || \
--
1.8.1
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply related [flat|nested] 3+ messages in thread* [LTP] [PATCHv2] testscripts/test_fs_bind.sh: adapt to system which marks mount point as "shared" defaultly
2013-04-09 7:30 [LTP] [PATCH] testscripts/test_fs_bind.sh: adapt to system which marks mount point as "shared" defaultly DAN LI
@ 2013-04-09 7:57 ` DAN LI
2013-04-15 3:12 ` Wanlong Gao
0 siblings, 1 reply; 3+ messages in thread
From: DAN LI @ 2013-04-09 7:57 UTC (permalink / raw)
To: ltp-list
Linux kernel does not allow to move a mount residing under a
shared mount.
This patch tries to make sure test cases of "move" run under
a private mount.
Signed-off-by: DAN LI <li.dan@cn.fujitsu.com>
---
testscripts/test_fs_bind.sh | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/testscripts/test_fs_bind.sh b/testscripts/test_fs_bind.sh
index 92c51a1..792fff2 100755
--- a/testscripts/test_fs_bind.sh
+++ b/testscripts/test_fs_bind.sh
@@ -107,6 +107,18 @@ test_prereqs()
exit -1
fi
+ mount --bind "${sandbox}" "${sandbox}" >& /dev/null
+ if [ $? -ne 0 ]; then
+ tst_brkm TBROK true "$0: failed to perform bind mount on directory \"${sandbox}\""
+ exit 1
+ fi
+
+ mount --make-private "${sandbox}" >& /dev/null
+ if [ $? -ne 0 ]; then
+ tst_brkm TBROK true "$0: failed to make private mountpoint on directory \"${sandbox}\""
+ exit 1
+ fi
+
local mnt_bind=1
local mnt_move=1
@@ -153,17 +165,11 @@ test_prereqs()
tst_resm TINFO "$0: kernel >= 2.6.15 detected -- continuing"
fi
- mount --bind "${sandbox}" "${sandbox}" && {
- mount --make-shared "${sandbox}" > /dev/null 2>&1 || "${FS_BIND_ROOT}/bin/smount" "${sandbox}" shared
- umount "${sandbox}" || {
- tst_resm TFAIL "$0: failed to umount simplest shared subtree"
- exit 1
- }
- } || {
- tst_brkm TBROK true "$0: failed to perform bind mount"
+ mount --make-shared "${sandbox}" > /dev/null 2>&1 || "${FS_BIND_ROOT}/bin/smount" "${sandbox}" shared
+ umount "${sandbox}" || {
+ tst_resm TFAIL "$0: failed to umount simplest shared subtree"
exit 1
}
-
tst_resm TPASS "$0: umounted simplest shared subtree"
}
@@ -428,6 +434,9 @@ run_test()
save_sandbox "$tname" "$resdir/$tname" || do_break=1
save_mounts "$tname" "$resdir/$tname" || do_break=1
save_proc_mounts "$tname" "$resdir/$tname" || do_break=1
+ mount --bind "${sandbox}" "${sandbox}" >& /dev/null || do_break=1
+ mount --make-private "${sandbox}" >& /dev/null || do_break=1
+
if [ $do_break -eq 1 ]; then
tst_brkm TBROK true "$tname: failed to save pre-test state of \"${sandbox}\""
return 2
@@ -453,6 +462,7 @@ run_test()
#echo "SUCCEEDED"
((nsucceeded++))
fi
+ umount -l "${sandbox}" >& /dev/null
check_proc_mounts "$tname" "$resdir/$tname" || \
restore_proc_mounts "$tname" "$resdir/$tname" || do_break=1
check_mounts "$tname" "$resdir/$tname" || \
--
1.8.1
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [LTP] [PATCHv2] testscripts/test_fs_bind.sh: adapt to system which marks mount point as "shared" defaultly
2013-04-09 7:57 ` [LTP] [PATCHv2] " DAN LI
@ 2013-04-15 3:12 ` Wanlong Gao
0 siblings, 0 replies; 3+ messages in thread
From: Wanlong Gao @ 2013-04-15 3:12 UTC (permalink / raw)
To: DAN LI; +Cc: ltp-list
On 04/09/2013 03:57 PM, DAN LI wrote:
> Linux kernel does not allow to move a mount residing under a
> shared mount.
>
> This patch tries to make sure test cases of "move" run under
> a private mount.
>
> Signed-off-by: DAN LI <li.dan@cn.fujitsu.com>
Applied, thank you.
Wanlong Gao
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-04-15 3:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-09 7:30 [LTP] [PATCH] testscripts/test_fs_bind.sh: adapt to system which marks mount point as "shared" defaultly DAN LI
2013-04-09 7:57 ` [LTP] [PATCHv2] " DAN LI
2013-04-15 3:12 ` Wanlong Gao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox