* [LTP] [PATCH]syscalls/adjtimex01.c: cleanup
@ 2013-04-19 3:32 DAN LI
2013-04-19 9:34 ` Wanlong Gao
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: DAN LI @ 2013-04-19 3:32 UTC (permalink / raw)
To: LTP list
cleanup for syscalls/adjtimex01.c
Signed-off-by: DAN LI <li.dan@cn.fujitsu.com>
---
testcases/kernel/syscalls/adjtimex/adjtimex01.c | 84 +++++--------------------
1 file changed, 17 insertions(+), 67 deletions(-)
diff --git a/testcases/kernel/syscalls/adjtimex/adjtimex01.c b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
index 000a979..b995e8e 100644
--- a/testcases/kernel/syscalls/adjtimex/adjtimex01.c
+++ b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
@@ -12,57 +12,18 @@
* You should have received a copy of the GNU General Public License along
* with this program; if not, write the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
*/
-/**********************************************************
- *
- * TEST IDENTIFIER : adjtimex01
- *
- * EXECUTED BY : root / superuser
- *
- * TEST TITLE : Basic test for adjtimex(2)
- *
- * TEST CASE TOTAL : 1
- *
- * AUTHOR : Saji Kumar.V.R <saji.kumar@wipro.com>
- *
- * SIGNALS
- * Uses SIGUSR1 to pause before test if option set.
- * (See the parse_opts(3) man page).
- *
- * DESCRIPTION
- * This is a Phase I test for the adjtimex(2) system call.
- * It is intended to provide a limited exposure of the system call.
- *
- * Setup:
- * Setup signal handling.
- * Pause for SIGUSR1 if option specified.
- * Save current parameters in tim_save
- *
- * Test:
- * Loop if the proper options are given.
- * call adjtimex with saved timex structure
- * Check return value is between 0 & 5
- * Test passed
- * Otherwise
- * Test failed
- *
- * Cleanup:
- * Print errno log and/or timing stats if options given
- *
- * USAGE: <for command-line>
- * adjtimex01 [-c n] [-e] [-i n] [-I x] [-P x] [-t] [-h] [-f] [-p]
- * where, -c n : Run n copies concurrently.
- * -e : Turn on errno logging.
- * -h : Show help screen
- * -f : Turn off functional testing
- * -i n : Execute test n times.
- * -I x : Execute test for x seconds.
- * -p : Pause for SIGUSR1 before starting
- * -P x : Pause for x seconds between iterations.
- * -t : Turn on syscall timing.
- *
- ****************************************************************/
+
+/*
+ AUTHOR: Saji Kumar.V.R <saji.kumar@wipro.com>
+ EXECUTED BY: root / superuser
+
+ TEST ITEMS:
+ 1. Check to see if adjtimex succeed with mode combination :
+ ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR |
+ ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK
+ 2. Check to see if adjtimex succeed with mode ADJ_OFFSET_SINGLESHOT
+*/
#if defined UCLINUX && !__THROW
/* workaround for libc bug causing failure in sys/timex.h */
@@ -74,11 +35,11 @@
#include "test.h"
#include "usctest.h"
-#define SET_MODE ( ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \
- ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK )
+#define SET_MODE (ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \
+ ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK)
-static void setup();
-static void cleanup();
+static void setup(void);
+static void cleanup(void);
char *TCID = "adjtimex01";
int TST_TOTAL = 1;
@@ -87,7 +48,6 @@ static struct timex tim_save;
int main(int ac, char **av)
{
-
int lc;
char *msg;
@@ -118,10 +78,8 @@ int main(int ac, char **av)
tst_exit();
}
-/* setup() - performs all ONE TIME setup for this test */
-void setup()
+static void setup(void)
{
-
tst_require_root(NULL);
tim_save.modes = 0;
@@ -136,15 +94,7 @@ void setup()
"failed to save current parameters");
}
-/*
- *cleanup() - performs all ONE TIME cleanup for this test at
- * completion or premature exit.
- */
-void cleanup()
+static void cleanup(void)
{
- /*
- * print timing stats if that option was specified.
- * print errno log if that option was specified.
- */
TEST_CLEANUP;
}
--
1.8.1
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [LTP] [PATCH]syscalls/adjtimex01.c: cleanup
2013-04-19 3:32 [LTP] [PATCH]syscalls/adjtimex01.c: cleanup DAN LI
@ 2013-04-19 9:34 ` Wanlong Gao
[not found] ` <5170BBCE.3090503@cn.fujitsu.com>
2013-04-22 2:17 ` [LTP] [PATCH]syscalls/adjtimex01.c: cleanup Wanlong Gao
2 siblings, 0 replies; 5+ messages in thread
From: Wanlong Gao @ 2013-04-19 9:34 UTC (permalink / raw)
To: DAN LI; +Cc: LTP list
On 04/19/2013 11:32 AM, DAN LI wrote:
>
> cleanup for syscalls/adjtimex01.c
>
> Signed-off-by: DAN LI <li.dan@cn.fujitsu.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
> ---
> testcases/kernel/syscalls/adjtimex/adjtimex01.c | 84 +++++--------------------
> 1 file changed, 17 insertions(+), 67 deletions(-)
>
> diff --git a/testcases/kernel/syscalls/adjtimex/adjtimex01.c b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> index 000a979..b995e8e 100644
> --- a/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> +++ b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> @@ -12,57 +12,18 @@
> * You should have received a copy of the GNU General Public License along
> * with this program; if not, write the Free Software Foundation, Inc.,
> * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> - *
> */
> -/**********************************************************
> - *
> - * TEST IDENTIFIER : adjtimex01
> - *
> - * EXECUTED BY : root / superuser
> - *
> - * TEST TITLE : Basic test for adjtimex(2)
> - *
> - * TEST CASE TOTAL : 1
> - *
> - * AUTHOR : Saji Kumar.V.R <saji.kumar@wipro.com>
> - *
> - * SIGNALS
> - * Uses SIGUSR1 to pause before test if option set.
> - * (See the parse_opts(3) man page).
> - *
> - * DESCRIPTION
> - * This is a Phase I test for the adjtimex(2) system call.
> - * It is intended to provide a limited exposure of the system call.
> - *
> - * Setup:
> - * Setup signal handling.
> - * Pause for SIGUSR1 if option specified.
> - * Save current parameters in tim_save
> - *
> - * Test:
> - * Loop if the proper options are given.
> - * call adjtimex with saved timex structure
> - * Check return value is between 0 & 5
> - * Test passed
> - * Otherwise
> - * Test failed
> - *
> - * Cleanup:
> - * Print errno log and/or timing stats if options given
> - *
> - * USAGE: <for command-line>
> - * adjtimex01 [-c n] [-e] [-i n] [-I x] [-P x] [-t] [-h] [-f] [-p]
> - * where, -c n : Run n copies concurrently.
> - * -e : Turn on errno logging.
> - * -h : Show help screen
> - * -f : Turn off functional testing
> - * -i n : Execute test n times.
> - * -I x : Execute test for x seconds.
> - * -p : Pause for SIGUSR1 before starting
> - * -P x : Pause for x seconds between iterations.
> - * -t : Turn on syscall timing.
> - *
> - ****************************************************************/
> +
> +/*
> + AUTHOR: Saji Kumar.V.R <saji.kumar@wipro.com>
> + EXECUTED BY: root / superuser
> +
> + TEST ITEMS:
> + 1. Check to see if adjtimex succeed with mode combination :
> + ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR |
> + ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK
> + 2. Check to see if adjtimex succeed with mode ADJ_OFFSET_SINGLESHOT
> +*/
>
> #if defined UCLINUX && !__THROW
> /* workaround for libc bug causing failure in sys/timex.h */
> @@ -74,11 +35,11 @@
> #include "test.h"
> #include "usctest.h"
>
> -#define SET_MODE ( ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \
> - ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK )
> +#define SET_MODE (ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \
> + ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK)
>
> -static void setup();
> -static void cleanup();
> +static void setup(void);
> +static void cleanup(void);
>
> char *TCID = "adjtimex01";
> int TST_TOTAL = 1;
> @@ -87,7 +48,6 @@ static struct timex tim_save;
>
> int main(int ac, char **av)
> {
> -
> int lc;
> char *msg;
>
> @@ -118,10 +78,8 @@ int main(int ac, char **av)
> tst_exit();
> }
>
> -/* setup() - performs all ONE TIME setup for this test */
> -void setup()
> +static void setup(void)
> {
> -
> tst_require_root(NULL);
>
> tim_save.modes = 0;
> @@ -136,15 +94,7 @@ void setup()
> "failed to save current parameters");
> }
>
> -/*
> - *cleanup() - performs all ONE TIME cleanup for this test at
> - * completion or premature exit.
> - */
> -void cleanup()
> +static void cleanup(void)
> {
> - /*
> - * print timing stats if that option was specified.
> - * print errno log if that option was specified.
> - */
> TEST_CLEANUP;
> }
>
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply [flat|nested] 5+ messages in thread[parent not found: <5170BBCE.3090503@cn.fujitsu.com>]
* Re: [LTP] [PATCH]syscalls/adjtimex01.c: Test for mode ADJ_OFFSET_SINGLESHOT
[not found] ` <5170BBCE.3090503@cn.fujitsu.com>
@ 2013-04-19 9:34 ` Wanlong Gao
2013-04-22 2:15 ` Wanlong Gao
1 sibling, 0 replies; 5+ messages in thread
From: Wanlong Gao @ 2013-04-19 9:34 UTC (permalink / raw)
To: DAN LI; +Cc: ltp-list
On 04/19/2013 11:36 AM, DAN LI wrote:
>
> Additional test for mode ADJ_OFFSET_SINGLESHOT.
>
> Signed-off-by: DAN LI <li.dan@cn.fujitsu.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
> ---
> testcases/kernel/syscalls/adjtimex/adjtimex01.c | 24 ++++++++++++++++++++----
> 1 file changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/testcases/kernel/syscalls/adjtimex/adjtimex01.c b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> index b995e8e..d16a5f3 100644
> --- a/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> +++ b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> @@ -42,7 +42,7 @@ static void setup(void);
> static void cleanup(void);
>
> char *TCID = "adjtimex01";
> -int TST_TOTAL = 1;
> +int TST_TOTAL = 2;
>
> static struct timex tim_save;
>
> @@ -66,10 +66,26 @@ int main(int ac, char **av)
> TEST(adjtimex(&tim_save));
>
> if ((TEST_RETURN >= 0) && (TEST_RETURN <= 5)) {
> - tst_resm(TPASS, "adjtimex() returned %ld", TEST_RETURN);
> + tst_resm(TPASS, "adjtimex() with mode %u returned %ld",
> + SET_MODE, TEST_RETURN);
> } else {
> - tst_resm(TFAIL | TTERRNO, "Test Failed, adjtimex()"
> - "returned %ld", TEST_RETURN);
> + tst_resm(TFAIL | TTERRNO,
> + "Test Failed, adjtimex() with mode %u "
> + "returned %ld", SET_MODE, TEST_RETURN);
> + }
> +
> + /* Call adjtimex(2) */
> + tim_save.modes = ADJ_OFFSET_SINGLESHOT;
> +
> + TEST(adjtimex(&tim_save));
> +
> + if ((TEST_RETURN >= 0) && (TEST_RETURN <= 5)) {
> + tst_resm(TPASS, "adjtimex() with mode %u returned %ld",
> + ADJ_OFFSET_SINGLESHOT, TEST_RETURN);
> + } else {
> + tst_resm(TFAIL | TTERRNO,
> + "Test Failed, adjtimex() with mode %u returned "
> + "%ld", ADJ_OFFSET_SINGLESHOT, TEST_RETURN);
> }
> }
>
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [LTP] [PATCH]syscalls/adjtimex01.c: Test for mode ADJ_OFFSET_SINGLESHOT
[not found] ` <5170BBCE.3090503@cn.fujitsu.com>
2013-04-19 9:34 ` [LTP] [PATCH]syscalls/adjtimex01.c: Test for mode ADJ_OFFSET_SINGLESHOT Wanlong Gao
@ 2013-04-22 2:15 ` Wanlong Gao
1 sibling, 0 replies; 5+ messages in thread
From: Wanlong Gao @ 2013-04-22 2:15 UTC (permalink / raw)
To: DAN LI; +Cc: ltp-list
On 04/19/2013 11:36 AM, DAN LI wrote:
>
> Additional test for mode ADJ_OFFSET_SINGLESHOT.
>
> Signed-off-by: DAN LI <li.dan@cn.fujitsu.com>
Applied, thank you.
Wanlong Gao
> ---
> testcases/kernel/syscalls/adjtimex/adjtimex01.c | 24 ++++++++++++++++++++----
> 1 file changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/testcases/kernel/syscalls/adjtimex/adjtimex01.c b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> index b995e8e..d16a5f3 100644
> --- a/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> +++ b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> @@ -42,7 +42,7 @@ static void setup(void);
> static void cleanup(void);
>
> char *TCID = "adjtimex01";
> -int TST_TOTAL = 1;
> +int TST_TOTAL = 2;
>
> static struct timex tim_save;
>
> @@ -66,10 +66,26 @@ int main(int ac, char **av)
> TEST(adjtimex(&tim_save));
>
> if ((TEST_RETURN >= 0) && (TEST_RETURN <= 5)) {
> - tst_resm(TPASS, "adjtimex() returned %ld", TEST_RETURN);
> + tst_resm(TPASS, "adjtimex() with mode %u returned %ld",
> + SET_MODE, TEST_RETURN);
> } else {
> - tst_resm(TFAIL | TTERRNO, "Test Failed, adjtimex()"
> - "returned %ld", TEST_RETURN);
> + tst_resm(TFAIL | TTERRNO,
> + "Test Failed, adjtimex() with mode %u "
> + "returned %ld", SET_MODE, TEST_RETURN);
> + }
> +
> + /* Call adjtimex(2) */
> + tim_save.modes = ADJ_OFFSET_SINGLESHOT;
> +
> + TEST(adjtimex(&tim_save));
> +
> + if ((TEST_RETURN >= 0) && (TEST_RETURN <= 5)) {
> + tst_resm(TPASS, "adjtimex() with mode %u returned %ld",
> + ADJ_OFFSET_SINGLESHOT, TEST_RETURN);
> + } else {
> + tst_resm(TFAIL | TTERRNO,
> + "Test Failed, adjtimex() with mode %u returned "
> + "%ld", ADJ_OFFSET_SINGLESHOT, TEST_RETURN);
> }
> }
>
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [LTP] [PATCH]syscalls/adjtimex01.c: cleanup
2013-04-19 3:32 [LTP] [PATCH]syscalls/adjtimex01.c: cleanup DAN LI
2013-04-19 9:34 ` Wanlong Gao
[not found] ` <5170BBCE.3090503@cn.fujitsu.com>
@ 2013-04-22 2:17 ` Wanlong Gao
2 siblings, 0 replies; 5+ messages in thread
From: Wanlong Gao @ 2013-04-22 2:17 UTC (permalink / raw)
To: DAN LI; +Cc: LTP list
On 04/19/2013 11:32 AM, DAN LI wrote:
>
> cleanup for syscalls/adjtimex01.c
>
> Signed-off-by: DAN LI <li.dan@cn.fujitsu.com>
Applied, thank you.
Wanlong Gao
> ---
> testcases/kernel/syscalls/adjtimex/adjtimex01.c | 84 +++++--------------------
> 1 file changed, 17 insertions(+), 67 deletions(-)
>
> diff --git a/testcases/kernel/syscalls/adjtimex/adjtimex01.c b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> index 000a979..b995e8e 100644
> --- a/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> +++ b/testcases/kernel/syscalls/adjtimex/adjtimex01.c
> @@ -12,57 +12,18 @@
> * You should have received a copy of the GNU General Public License along
> * with this program; if not, write the Free Software Foundation, Inc.,
> * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> - *
> */
> -/**********************************************************
> - *
> - * TEST IDENTIFIER : adjtimex01
> - *
> - * EXECUTED BY : root / superuser
> - *
> - * TEST TITLE : Basic test for adjtimex(2)
> - *
> - * TEST CASE TOTAL : 1
> - *
> - * AUTHOR : Saji Kumar.V.R <saji.kumar@wipro.com>
> - *
> - * SIGNALS
> - * Uses SIGUSR1 to pause before test if option set.
> - * (See the parse_opts(3) man page).
> - *
> - * DESCRIPTION
> - * This is a Phase I test for the adjtimex(2) system call.
> - * It is intended to provide a limited exposure of the system call.
> - *
> - * Setup:
> - * Setup signal handling.
> - * Pause for SIGUSR1 if option specified.
> - * Save current parameters in tim_save
> - *
> - * Test:
> - * Loop if the proper options are given.
> - * call adjtimex with saved timex structure
> - * Check return value is between 0 & 5
> - * Test passed
> - * Otherwise
> - * Test failed
> - *
> - * Cleanup:
> - * Print errno log and/or timing stats if options given
> - *
> - * USAGE: <for command-line>
> - * adjtimex01 [-c n] [-e] [-i n] [-I x] [-P x] [-t] [-h] [-f] [-p]
> - * where, -c n : Run n copies concurrently.
> - * -e : Turn on errno logging.
> - * -h : Show help screen
> - * -f : Turn off functional testing
> - * -i n : Execute test n times.
> - * -I x : Execute test for x seconds.
> - * -p : Pause for SIGUSR1 before starting
> - * -P x : Pause for x seconds between iterations.
> - * -t : Turn on syscall timing.
> - *
> - ****************************************************************/
> +
> +/*
> + AUTHOR: Saji Kumar.V.R <saji.kumar@wipro.com>
> + EXECUTED BY: root / superuser
> +
> + TEST ITEMS:
> + 1. Check to see if adjtimex succeed with mode combination :
> + ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR |
> + ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK
> + 2. Check to see if adjtimex succeed with mode ADJ_OFFSET_SINGLESHOT
> +*/
>
> #if defined UCLINUX && !__THROW
> /* workaround for libc bug causing failure in sys/timex.h */
> @@ -74,11 +35,11 @@
> #include "test.h"
> #include "usctest.h"
>
> -#define SET_MODE ( ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \
> - ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK )
> +#define SET_MODE (ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \
> + ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK)
>
> -static void setup();
> -static void cleanup();
> +static void setup(void);
> +static void cleanup(void);
>
> char *TCID = "adjtimex01";
> int TST_TOTAL = 1;
> @@ -87,7 +48,6 @@ static struct timex tim_save;
>
> int main(int ac, char **av)
> {
> -
> int lc;
> char *msg;
>
> @@ -118,10 +78,8 @@ int main(int ac, char **av)
> tst_exit();
> }
>
> -/* setup() - performs all ONE TIME setup for this test */
> -void setup()
> +static void setup(void)
> {
> -
> tst_require_root(NULL);
>
> tim_save.modes = 0;
> @@ -136,15 +94,7 @@ void setup()
> "failed to save current parameters");
> }
>
> -/*
> - *cleanup() - performs all ONE TIME cleanup for this test at
> - * completion or premature exit.
> - */
> -void cleanup()
> +static void cleanup(void)
> {
> - /*
> - * print timing stats if that option was specified.
> - * print errno log if that option was specified.
> - */
> TEST_CLEANUP;
> }
>
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-04-22 2:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-19 3:32 [LTP] [PATCH]syscalls/adjtimex01.c: cleanup DAN LI
2013-04-19 9:34 ` Wanlong Gao
[not found] ` <5170BBCE.3090503@cn.fujitsu.com>
2013-04-19 9:34 ` [LTP] [PATCH]syscalls/adjtimex01.c: Test for mode ADJ_OFFSET_SINGLESHOT Wanlong Gao
2013-04-22 2:15 ` Wanlong Gao
2013-04-22 2:17 ` [LTP] [PATCH]syscalls/adjtimex01.c: cleanup Wanlong Gao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox