From: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
To: Xiong Zhou <xzhou@redhat.com>, ltp-list@lists.sourceforge.net
Subject: Re: [LTP] [PATCH v3 2/3] diotest4: Some code cleanup in diotest4.c
Date: Thu, 21 Aug 2014 17:56:21 +0400 [thread overview]
Message-ID: <53F5FA85.90100@oracle.com> (raw)
In-Reply-To: <112335100.22365402.1408594496771.JavaMail.zimbra@redhat.com>
On 08/21/2014 08:14 AM, Xiong Zhou wrote:
>
> Split dup code cleanup and function change from v2.
I suppose this message is directed to the LTP mailing list subscribers
and should not be in `git log` after the patch is applied. Therefore put
such messages after '---'.
One small comment below.
>
> Signed-off-by: Xiong Zhou <xzhou@redhat.com>
> ---
> testcases/kernel/io/direct_io/diotest4.c | 100 ++++++++++---------------------
> 1 file changed, 32 insertions(+), 68 deletions(-)
>
> diff --git a/testcases/kernel/io/direct_io/diotest4.c b/testcases/kernel/io/direct_io/diotest4.c
> index 10281bf..8059f28 100644
> --- a/testcases/kernel/io/direct_io/diotest4.c
> +++ b/testcases/kernel/io/direct_io/diotest4.c
> @@ -171,6 +171,16 @@ void prg_usage()
> exit(1);
> }
>
> +static void testcheck_end(int ret, int *failed, int *fail_count, char *msg)
> +{
> + if (ret != 0) {
> + *failed = TRUE;
> + *fail_count++;
(*fail_count)++;
> + tst_resm(TFAIL, msg);
> + } else
> + tst_resm(TPASS, msg);
> +}
> +
> static void setup(void);
> static void cleanup(void);
> static int fd1 = -1;
> @@ -290,12 +300,7 @@ int main(int argc, char *argv[])
> count = bufsize;
> newfd = -1;
> ret = runtest_f(newfd, buf2, offset, count, EBADF, 5, "negative fd");
> - if (ret != 0) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "Invalid file descriptor");
> - } else
> - tst_resm(TPASS, "Invalid file descriptor");
> + testcheck_end(ret, &failed, &fail_count, "Invalid file descriptor");
> total++;
>
> /* Test-6: Out of range file descriptor */
> @@ -306,15 +311,10 @@ int main(int argc, char *argv[])
> failed = TRUE;
> tst_resm(TFAIL, "Out of range file descriptor");
> } else {
> - ret =
> - runtest_f(newfd, buf2, offset, count, EBADF, 6,
> + ret = runtest_f(newfd, buf2, offset, count, EBADF, 6,
> "out of range fd");
> - if (ret != 0) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "Out of range file descriptor");
> - } else
> - tst_resm(TPASS, "Out of range file descriptor");
> + testcheck_end(ret, &failed, &fail_count,
> + "Out of range file descriptor");
> }
> close(newfd);
> total++;
> @@ -327,12 +327,7 @@ int main(int argc, char *argv[])
> strerror(errno));
> }
> ret = runtest_f(fd, buf2, offset, count, EBADF, 7, "closed fd");
> - if (ret != 0) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "Closed file descriptor");
> - } else
> - tst_resm(TPASS, "Closed file descriptor");
> + testcheck_end(ret, &failed, &fail_count, "Closed file descriptor");
> total++;
>
> /* Test-9: removed */
> @@ -345,12 +340,8 @@ int main(int argc, char *argv[])
> tst_resm(TCONF, "Direct I/O on /dev/null is not supported");
> } else {
> ret = runtest_s(newfd, buf2, offset, count, 9, "/dev/null");
> - if (ret != 0) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "character device read, write");
> - } else
> - tst_resm(TPASS, "character device read, write");
> + testcheck_end(ret, &failed, &fail_count,
> + "character device read, write");
> }
> close(newfd);
> total++;
> @@ -373,12 +364,8 @@ int main(int argc, char *argv[])
> strerror(errno));
> }
> ret = runtest_s(fd, buf2, offset, count, 10, "mmapped file");
> - if (ret != 0) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "read, write to a mmaped file");
> - } else
> - tst_resm(TPASS, "read, write to a mmaped file");
> + testcheck_end(ret, &failed, &fail_count,
> + "read, write to a mmaped file");
> total++;
>
> /* Test-11: read, write to an unmaped file with munmap */
> @@ -387,12 +374,8 @@ int main(int argc, char *argv[])
> strerror(errno));
> }
> ret = runtest_s(fd, buf2, offset, count, 11, "unmapped file");
> - if (ret != 0) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "read, write to an unmapped file");
> - } else
> - tst_resm(TPASS, "read, write to an unmapped file");
> + testcheck_end(ret, &failed, &fail_count,
> + "read, write to an unmapped file");
> close(fd);
> total++;
>
> @@ -478,12 +461,8 @@ int main(int argc, char *argv[])
> l_fail = TRUE;
> }
> }
> - if (l_fail) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "read, write with non-aligned buffer");
> - } else
> - tst_resm(TPASS, "read, write with non-aligned buffer");
> + testcheck_end(l_fail, &failed, &fail_count,
> + "read, write with non-aligned buffer");
> total++;
> close(fd);
>
> @@ -500,8 +479,7 @@ int main(int argc, char *argv[])
> strerror(errno));
> l_fail = TRUE;
> } else {
> - ret =
> - read(fd, (char *)((ulong) ADDRESS_OF_MAIN & pagemask),
> + ret = read(fd, (char *)((ulong) ADDRESS_OF_MAIN & pagemask),
> count);
> if (ret >= 0 || errno != EFAULT) {
> tst_resm(TFAIL,
> @@ -515,8 +493,7 @@ int main(int argc, char *argv[])
> strerror(errno));
> l_fail = TRUE;
> } else {
> - ret =
> - write(fd, (char *)((ulong) ADDRESS_OF_MAIN & pagemask),
> + ret = write(fd, (char *)((ulong) ADDRESS_OF_MAIN & pagemask),
> count);
> if (ret < 0) {
> tst_resm(TFAIL,
> @@ -525,12 +502,8 @@ int main(int argc, char *argv[])
> l_fail = TRUE;
> }
> }
> - if (l_fail) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "read, write buffer in read-only space");
> - } else
> - tst_resm(TPASS, "read, write buffer in read-only space");
> + testcheck_end(l_fail, &failed, &fail_count,
> + "read, write buffer in read-only space");
> close(fd);
> total++;
>
> @@ -545,15 +518,10 @@ int main(int argc, char *argv[])
> tst_brkm(TBROK | TERRNO, cleanup,
> "open(%s, O_DIRECT|O_RDWR) failed", filename);
> }
> - ret =
> - runtest_f(fd, buf1, offset, count, EFAULT, 16,
> + ret = runtest_f(fd, buf1, offset, count, EFAULT, 16,
> " nonexistant space");
> - if (ret != 0) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "read, write in non-existant space");
> - } else
> - tst_resm(TPASS, "read, write in non-existant space");
> + testcheck_end(ret, &failed, &fail_count,
> + "read, write in non-existant space");
> total++;
> close(fd);
>
> @@ -565,12 +533,8 @@ int main(int argc, char *argv[])
> "open(%s, O_DIRECT|O_RDWR|O_SYNC failed)", filename);
> }
> ret = runtest_s(fd, buf2, offset, count, 17, "opened with O_SYNC");
> - if (ret != 0) {
> - failed = TRUE;
> - fail_count++;
> - tst_resm(TFAIL, "read, write for file with O_SYNC");
> - } else
> - tst_resm(TPASS, "read, write for file with O_SYNC");
> + testcheck_end(ret, &failed, &fail_count,
> + "read, write for file with O_SYNC");
> total++;
> close(fd);
>
>
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
prev parent reply other threads:[~2014-08-21 13:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <332769995.22364804.1408594421188.JavaMail.zimbra@redhat.com>
2014-08-21 4:14 ` [LTP] [PATCH v3 2/3] diotest4: Some code cleanup in diotest4.c Xiong Zhou
2014-08-21 13:56 ` Stanislav Kholmanskikh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53F5FA85.90100@oracle.com \
--to=stanislav.kholmanskikh@oracle.com \
--cc=ltp-list@lists.sourceforge.net \
--cc=xzhou@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox