[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Po-Hsu Lin]

The block_dev test in kernel_misc will taint kernel with a warning flag,
this is an expected behaviour.

However, if you run the cve-2017-17053 after it, as the test is looking
for a warning / died flag for a tainted kernel, it will cause false
alarm with:
  tst_taint.c:88: BROK: Kernel is already tainted: 14849

The kernel_misc test was executed before the cve test in the default
test plan. Move the kernel_misc test to the end of the list to
workaround this issue.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
---
 scenario_groups/default | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scenario_groups/default b/scenario_groups/default
index 1f3e5b27f..e5b34782c 100644
--- a/scenario_groups/default
+++ b/scenario_groups/default
@@ -22,7 +22,6 @@ power_management_tests
 hugetlb
 commands
 hyperthreading
-kernel_misc
 fs_ext4
 can
 cpuhotplug
@@ -30,3 +29,4 @@ net.ipv6_lib
 input
 cve
 crypto
+kernel_misc
-- 
2.17.1

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Xiao Yang]

Hi,

Your patch just workarounds the issue for now, because it still happens 
if a new test designed to taint
kernel is added to the group before cve group in future.

Could we save the value of tainted before running block_dev and then 
restore it after running block_dev?

Best Regards,
Xiao Yang
On 2019/06/28 18:39, Po-Hsu Lin wrote:
> The block_dev test in kernel_misc will taint kernel with a warning flag,
> this is an expected behaviour.
>
> However, if you run the cve-2017-17053 after it, as the test is looking
> for a warning / died flag for a tainted kernel, it will cause false
> alarm with:
>    tst_taint.c:88: BROK: Kernel is already tainted: 14849
>
> The kernel_misc test was executed before the cve test in the default
> test plan. Move the kernel_misc test to the end of the list to
> workaround this issue.
>
> Signed-off-by: Po-Hsu Lin<po-hsu.lin@canonical.com>
> ---
>   scenario_groups/default | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/scenario_groups/default b/scenario_groups/default
> index 1f3e5b27f..e5b34782c 100644
> --- a/scenario_groups/default
> +++ b/scenario_groups/default
> @@ -22,7 +22,6 @@ power_management_tests
>   hugetlb
>   commands
>   hyperthreading
> -kernel_misc
>   fs_ext4
>   can
>   cpuhotplug
> @@ -30,3 +29,4 @@ net.ipv6_lib
>   input
>   cve
>   crypto
> +kernel_misc

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Po-Hsu Lin]

Hello,

I am not sure if we can restore the value in /proc/sys/kernel/tainted,
which can be changed manually:
    # cat  /proc/sys/kernel/tainted
    0
    # echo 12800 > /proc/sys/kernel/tainted
    # cat  /proc/sys/kernel/tainted
    12800
But it can't be reset back to 0.

From the Documentation/admin-guide/tainted-kernels.rst, it states that:
"Note the kernel will remain tainted even after you undo what caused the taint
(i.e. unload a proprietary kernel module), to indicate the kernel remains not
trustworthy."

Thanks

On Mon, Jul 1, 2019 at 2:27 PM Xiao Yang <yangx.jy@cn.fujitsu.com> wrote:
>
> Hi,
>
> Your patch just workarounds the issue for now, because it still happens
> if a new test designed to taint
> kernel is added to the group before cve group in future.
>
> Could we save the value of tainted before running block_dev and then
> restore it after running block_dev?
>
> Best Regards,
> Xiao Yang
> On 2019/06/28 18:39, Po-Hsu Lin wrote:
> > The block_dev test in kernel_misc will taint kernel with a warning flag,
> > this is an expected behaviour.
> >
> > However, if you run the cve-2017-17053 after it, as the test is looking
> > for a warning / died flag for a tainted kernel, it will cause false
> > alarm with:
> >    tst_taint.c:88: BROK: Kernel is already tainted: 14849
> >
> > The kernel_misc test was executed before the cve test in the default
> > test plan. Move the kernel_misc test to the end of the list to
> > workaround this issue.
> >
> > Signed-off-by: Po-Hsu Lin<po-hsu.lin@canonical.com>
> > ---
> >   scenario_groups/default | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/scenario_groups/default b/scenario_groups/default
> > index 1f3e5b27f..e5b34782c 100644
> > --- a/scenario_groups/default
> > +++ b/scenario_groups/default
> > @@ -22,7 +22,6 @@ power_management_tests
> >   hugetlb
> >   commands
> >   hyperthreading
> > -kernel_misc
> >   fs_ext4
> >   can
> >   cpuhotplug
> > @@ -30,3 +29,4 @@ net.ipv6_lib
> >   input
> >   cve
> >   crypto
> > +kernel_misc
>
>
>

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Xiao Yang]

On 2019/07/01 14:58, Po-Hsu Lin wrote:
> Hello,
>
> I am not sure if we can restore the value in /proc/sys/kernel/tainted,
> which can be changed manually:
>      # cat  /proc/sys/kernel/tainted
>      0
>      # echo 12800>  /proc/sys/kernel/tainted
>      # cat  /proc/sys/kernel/tainted
>      12800
> But it can't be reset back to 0.
Hi,

It seems that the value of /proc/sys/kernel/tainted only be increased.

Best Regards,
Xiao Yang
> > From the Documentation/admin-guide/tainted-kernels.rst, it states that:
> "Note the kernel will remain tainted even after you undo what caused the taint
> (i.e. unload a proprietary kernel module), to indicate the kernel remains not
> trustworthy."
>
> Thanks
>
> On Mon, Jul 1, 2019 at 2:27 PM Xiao Yang<yangx.jy@cn.fujitsu.com>  wrote:
>> Hi,
>>
>> Your patch just workarounds the issue for now, because it still happens
>> if a new test designed to taint
>> kernel is added to the group before cve group in future.
>>
>> Could we save the value of tainted before running block_dev and then
>> restore it after running block_dev?
>>
>> Best Regards,
>> Xiao Yang
>> On 2019/06/28 18:39, Po-Hsu Lin wrote:
>>> The block_dev test in kernel_misc will taint kernel with a warning flag,
>>> this is an expected behaviour.
>>>
>>> However, if you run the cve-2017-17053 after it, as the test is looking
>>> for a warning / died flag for a tainted kernel, it will cause false
>>> alarm with:
>>>     tst_taint.c:88: BROK: Kernel is already tainted: 14849
>>>
>>> The kernel_misc test was executed before the cve test in the default
>>> test plan. Move the kernel_misc test to the end of the list to
>>> workaround this issue.
>>>
>>> Signed-off-by: Po-Hsu Lin<po-hsu.lin@canonical.com>
>>> ---
>>>    scenario_groups/default | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/scenario_groups/default b/scenario_groups/default
>>> index 1f3e5b27f..e5b34782c 100644
>>> --- a/scenario_groups/default
>>> +++ b/scenario_groups/default
>>> @@ -22,7 +22,6 @@ power_management_tests
>>>    hugetlb
>>>    commands
>>>    hyperthreading
>>> -kernel_misc
>>>    fs_ext4
>>>    can
>>>    cpuhotplug
>>> @@ -30,3 +29,4 @@ net.ipv6_lib
>>>    input
>>>    cve
>>>    crypto
>>> +kernel_misc
>>
>>
>
>

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Cyril Hrubis]

Hi!
> It seems that the value of /proc/sys/kernel/tainted only be increased.

That is by design, since otherwise people would erase the track of
unsigned/out-of-tree modules being loaded...

-- 
Cyril Hrubis
chrubis@suse.cz

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Cyril Hrubis]

Hi!
> Your patch just workarounds the issue for now, because it still happens 
> if a new test designed to taint
> kernel is added to the group before cve group in future.

Unfortunately there is no better solution for this, so I pushed the
patch.

-- 
Cyril Hrubis
chrubis@suse.cz

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Po-Hsu Lin]

Hello,
thanks for the review,
do you think if we should put a comment (if possible) inside that file
to avoid getting re-ordered for some reason in the future?

On Tue, Jul 2, 2019 at 9:05 PM Cyril Hrubis <chrubis@suse.cz> wrote:
>
> Hi!
> > Your patch just workarounds the issue for now, because it still happens
> > if a new test designed to taint
> > kernel is added to the group before cve group in future.
>
> Unfortunately there is no better solution for this, so I pushed the
> patch.
>
> --
> Cyril Hrubis
> chrubis@suse.cz

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Cyril Hrubis]

Hi!
> thanks for the review,
> do you think if we should put a comment (if possible) inside that file
> to avoid getting re-ordered for some reason in the future?

We cannot, the scenari files are simply read line by line, the format
does not support comments.

-- 
Cyril Hrubis
chrubis@suse.cz

[LTP] [PATCH] scenario_groups/default: run the kernel_misc test after the cve test

[Cyril Hrubis]

Hi!
Pushed, thanks.

-- 
Cyril Hrubis
chrubis@suse.cz