[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[Leo Liang]

/proc/mounts shows the mount point without trailing slashes, e.g.
~ $ cat /proc/mounts
xxx /root/cgroup cgroup rw,relatime,cpu 0 0

So current tst_umount would not work with argument that has trailing slash, e.g.
tst_umount cgroup/ would give "The device is not mounted".

Fix this by filtering out the trailing slash before grepping /proc/mounts.

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
---
 testcases/lib/tst_test.sh | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/testcases/lib/tst_test.sh b/testcases/lib/tst_test.sh
index c6aa2c487..f132512e7 100644
--- a/testcases/lib/tst_test.sh
+++ b/testcases/lib/tst_test.sh
@@ -282,13 +282,14 @@ tst_umount()
 
 	[ -z "$device" ] && return
 
+	device=${device%/} 
 	if ! grep -q "$device" /proc/mounts; then
 		tst_res TINFO "The $device is not mounted, skipping umount"
 		return
 	fi
 
 	while [ "$i" -lt 50 ]; do
-		if umount "$device" > /dev/null; then
+		if umount "$device"/ > /dev/null; then
 			return
 		fi
 
-- 
2.17.0

[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[xuyang2018.jy]

Hi Leo

> /proc/mounts shows the mount point without trailing slashes, e.g.
> ~ $ cat /proc/mounts
> xxx /root/cgroup cgroup rw,relatime,cpu 0 0
>
> So current tst_umount would not work with argument that has trailing slash, e.g.
> tst_umount cgroup/ would give "The device is not mounted".
>
> Fix this by filtering out the trailing slash before grepping /proc/mounts.
>
> Signed-off-by: Leo Yu-Chi Liang<ycliang@andestech.com>
> ---
>   testcases/lib/tst_test.sh | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/testcases/lib/tst_test.sh b/testcases/lib/tst_test.sh
> index c6aa2c487..f132512e7 100644
> --- a/testcases/lib/tst_test.sh
> +++ b/testcases/lib/tst_test.sh
> @@ -282,13 +282,14 @@ tst_umount()
>
>   	[ -z "$device" ]&&  return
>
> +	device=${device%/}
>   	if ! grep -q "$device" /proc/mounts; then
>   		tst_res TINFO "The $device is not mounted, skipping umount"
>   		return
>   	fi
>
>   	while [ "$i" -lt 50 ]; do
> -		if umount "$device">  /dev/null; then
> +		if umount "$device"/>  /dev/null; then
With removing this(we don't need add "/" here), this patch looks good to me
Reviewed-by: Yang Xu <xuyang2018.jy@fujitsu.com>
>   			return
>   		fi
>

[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[Petr Vorel]

> Hi Leo

> > /proc/mounts shows the mount point without trailing slashes, e.g.
> > ~ $ cat /proc/mounts
> > xxx /root/cgroup cgroup rw,relatime,cpu 0 0

> > So current tst_umount would not work with argument that has trailing slash, e.g.
> > tst_umount cgroup/ would give "The device is not mounted".

> > Fix this by filtering out the trailing slash before grepping /proc/mounts.

> > Signed-off-by: Leo Yu-Chi Liang<ycliang@andestech.com>
> > ---
> >   testcases/lib/tst_test.sh | 3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)

> > diff --git a/testcases/lib/tst_test.sh b/testcases/lib/tst_test.sh
> > index c6aa2c487..f132512e7 100644
> > --- a/testcases/lib/tst_test.sh
> > +++ b/testcases/lib/tst_test.sh
> > @@ -282,13 +282,14 @@ tst_umount()

> >   	[ -z "$device" ]&&  return

> > +	device=${device%/}
> >   	if ! grep -q "$device" /proc/mounts; then
> >   		tst_res TINFO "The $device is not mounted, skipping umount"
> >   		return
> >   	fi

> >   	while [ "$i" -lt 50 ]; do
> > -		if umount "$device">  /dev/null; then
> > +		if umount "$device"/>  /dev/null; then
> With removing this(we don't need add "/" here), this patch looks good to me
+1

Reviewed-by: Petr Vorel <pvorel@suse.cz>

Kind regards,
Petr

> Reviewed-by: Yang Xu <xuyang2018.jy@fujitsu.com>
> >   			return
> >   		fi

[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[Petr Vorel]

Hi all,

> > Hi Leo

> > > /proc/mounts shows the mount point without trailing slashes, e.g.
> > > ~ $ cat /proc/mounts
> > > xxx /root/cgroup cgroup rw,relatime,cpu 0 0

> > > So current tst_umount would not work with argument that has trailing slash, e.g.
> > > tst_umount cgroup/ would give "The device is not mounted".

> > > Fix this by filtering out the trailing slash before grepping /proc/mounts.

> > > Signed-off-by: Leo Yu-Chi Liang<ycliang@andestech.com>
> > > ---
> > >   testcases/lib/tst_test.sh | 3 ++-
> > >   1 file changed, 2 insertions(+), 1 deletion(-)

> > > diff --git a/testcases/lib/tst_test.sh b/testcases/lib/tst_test.sh
> > > index c6aa2c487..f132512e7 100644
> > > --- a/testcases/lib/tst_test.sh
> > > +++ b/testcases/lib/tst_test.sh
> > > @@ -282,13 +282,14 @@ tst_umount()

> > >   	[ -z "$device" ]&&  return

> > > +	device=${device%/}
> > >   	if ! grep -q "$device" /proc/mounts; then
> > >   		tst_res TINFO "The $device is not mounted, skipping umount"
> > >   		return
> > >   	fi

> > >   	while [ "$i" -lt 50 ]; do
> > > -		if umount "$device">  /dev/null; then
> > > +		if umount "$device"/>  /dev/null; then
> > With removing this(we don't need add "/" here), this patch looks good to me
> +1
Actually we need to keep / for next patch, right? (cgroup/)

Thus why not just changing argument for grep?
-       if ! grep -q "$device" /proc/mounts; then
+       if ! grep -q "${device%/}" /proc/mounts; then

Kind regards,
Petr

> Reviewed-by: Petr Vorel <pvorel@suse.cz>

> Kind regards,
> Petr

> > Reviewed-by: Yang Xu <xuyang2018.jy@fujitsu.com>
> > >   			return
> > >   		fi

[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[xuyang2018.jy]

Hi Petr
> Hi all,
>
>>> Hi Leo
>
>>>> /proc/mounts shows the mount point without trailing slashes, e.g.
>>>> ~ $ cat /proc/mounts
>>>> xxx /root/cgroup cgroup rw,relatime,cpu 0 0
>
>>>> So current tst_umount would not work with argument that has trailing slash, e.g.
>>>> tst_umount cgroup/ would give "The device is not mounted".
>
>>>> Fix this by filtering out the trailing slash before grepping /proc/mounts.
>
>>>> Signed-off-by: Leo Yu-Chi Liang<ycliang@andestech.com>
>>>> ---
>>>>    testcases/lib/tst_test.sh | 3 ++-
>>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>
>>>> diff --git a/testcases/lib/tst_test.sh b/testcases/lib/tst_test.sh
>>>> index c6aa2c487..f132512e7 100644
>>>> --- a/testcases/lib/tst_test.sh
>>>> +++ b/testcases/lib/tst_test.sh
>>>> @@ -282,13 +282,14 @@ tst_umount()
>
>>>>    	[ -z "$device" ]&&   return
>
>>>> +	device=${device%/}
>>>>    	if ! grep -q "$device" /proc/mounts; then
>>>>    		tst_res TINFO "The $device is not mounted, skipping umount"
>>>>    		return
>>>>    	fi
>
>>>>    	while [ "$i" -lt 50 ]; do
>>>> -		if umount "$device">   /dev/null; then
>>>> +		if umount "$device"/>   /dev/null; then
>>> With removing this(we don't need add "/" here), this patch looks good to me
>> +1
> Actually we need to keep / for next patch, right? (cgroup/)
I guess our ltp tst_umount api should support  to umount cgroup or 
cgroup/ like umount command does.

>
> Thus why not just changing argument for grep?
> -       if ! grep -q "$device" /proc/mounts; then
> +       if ! grep -q "${device%/}" /proc/mounts; then
Yes, it is more easier. But I think it still existed the problme when 
we only use "/" parameters. I guess we should reject this situation.

code maybe as below:
--- a/testcases/lib/tst_test.sh
+++ b/testcases/lib/tst_test.sh
@@ -282,7 +282,12 @@ tst_umount()

         [ -z "$device" ] && return

-       if ! grep -q "$device" /proc/mounts; then
+       if [ "$device" = "/" ]; then
+               tst_res TINFO "We can not umount / directory"
+               return
+       fi
+
+       if ! grep -q "${device%/}" /proc/mounts; then
                 tst_res TINFO "The $device is not mounted, skipping umount"
                 return
         fi



>
> Kind regards,
> Petr
>
>> Reviewed-by: Petr Vorel<pvorel@suse.cz>
>
>> Kind regards,
>> Petr
>
>>> Reviewed-by: Yang Xu<xuyang2018.jy@fujitsu.com>
>>>>    			return
>>>>    		fi
>

[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[Petr Vorel]

Hi Xu, all,

> Hi Petr
> > Hi all,

> >>> Hi Leo

> >>>> /proc/mounts shows the mount point without trailing slashes, e.g.
> >>>> ~ $ cat /proc/mounts
> >>>> xxx /root/cgroup cgroup rw,relatime,cpu 0 0

> >>>> So current tst_umount would not work with argument that has trailing slash, e.g.
> >>>> tst_umount cgroup/ would give "The device is not mounted".

> >>>> Fix this by filtering out the trailing slash before grepping /proc/mounts.

> >>>> Signed-off-by: Leo Yu-Chi Liang<ycliang@andestech.com>
> >>>> ---
> >>>>    testcases/lib/tst_test.sh | 3 ++-
> >>>>    1 file changed, 2 insertions(+), 1 deletion(-)

> >>>> diff --git a/testcases/lib/tst_test.sh b/testcases/lib/tst_test.sh
> >>>> index c6aa2c487..f132512e7 100644
> >>>> --- a/testcases/lib/tst_test.sh
> >>>> +++ b/testcases/lib/tst_test.sh
> >>>> @@ -282,13 +282,14 @@ tst_umount()

> >>>>    	[ -z "$device" ]&&   return

> >>>> +	device=${device%/}
> >>>>    	if ! grep -q "$device" /proc/mounts; then
> >>>>    		tst_res TINFO "The $device is not mounted, skipping umount"
> >>>>    		return
> >>>>    	fi

> >>>>    	while [ "$i" -lt 50 ]; do
> >>>> -		if umount "$device">   /dev/null; then
> >>>> +		if umount "$device"/>   /dev/null; then
> >>> With removing this(we don't need add "/" here), this patch looks good to me
> >> +1
> > Actually we need to keep / for next patch, right? (cgroup/)
> I guess our ltp tst_umount api should support  to umount cgroup or 
> cgroup/ like umount command does.

Also the patch always added trailing /:
+		if umount "$device"/ > /dev/null; then

if we keep that, the second patch wouldn't have to add it to "tst_umount
cgroup/" call ("tst_umount cgroup" would be enough).
I'm not sure if we want it. @Cyril?

> > Thus why not just changing argument for grep?
> > -       if ! grep -q "$device" /proc/mounts; then
> > +       if ! grep -q "${device%/}" /proc/mounts; then
> Yes, it is more easier. But I think it still existed the problme when 
> we only use "/" parameters. I guess we should reject this situation.

I would not care about it. 1) no test does 'tst_umount /' 2) error reporting
would be correct: umount: /: target is busy.

Kind regards,
Petr

> code maybe as below:
> --- a/testcases/lib/tst_test.sh
> +++ b/testcases/lib/tst_test.sh
> @@ -282,7 +282,12 @@ tst_umount()

>          [ -z "$device" ] && return

> -       if ! grep -q "$device" /proc/mounts; then
> +       if [ "$device" = "/" ]; then
> +               tst_res TINFO "We can not umount / directory"
> +               return
> +       fi
> +
> +       if ! grep -q "${device%/}" /proc/mounts; then
>                  tst_res TINFO "The $device is not mounted, skipping umount"
>                  return
>          fi

[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[Leo Liang]

Hi all,

On Mon, Jul 19, 2021 at 01:58:00PM +0800, Petr Vorel wrote:
> Hi all,
> 
> > > Hi Leo
> 
> > > > /proc/mounts shows the mount point without trailing slashes, e.g.
> > > > ~ $ cat /proc/mounts
> > > > xxx /root/cgroup cgroup rw,relatime,cpu 0 0
> 
> > > > So current tst_umount would not work with argument that has trailing slash, e.g.
> > > > tst_umount cgroup/ would give "The device is not mounted".
> 
> > > > Fix this by filtering out the trailing slash before grepping /proc/mounts.
> 
> > > > Signed-off-by: Leo Yu-Chi Liang<ycliang@andestech.com>
> > > > ---
> > > >   testcases/lib/tst_test.sh | 3 ++-
> > > >   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> > > > diff --git a/testcases/lib/tst_test.sh b/testcases/lib/tst_test.sh
> > > > index c6aa2c487..f132512e7 100644
> > > > --- a/testcases/lib/tst_test.sh
> > > > +++ b/testcases/lib/tst_test.sh
> > > > @@ -282,13 +282,14 @@ tst_umount()
> 
> > > >   	[ -z "$device" ]&&  return
> 
> > > > +	device=${device%/}
> > > >   	if ! grep -q "$device" /proc/mounts; then
> > > >   		tst_res TINFO "The $device is not mounted, skipping umount"
> > > >   		return
> > > >   	fi
> 
> > > >   	while [ "$i" -lt 50 ]; do
> > > > -		if umount "$device">  /dev/null; then
> > > > +		if umount "$device"/>  /dev/null; then
> > > With removing this(we don't need add "/" here), this patch looks good to me
> > +1
> Actually we need to keep / for next patch, right? (cgroup/)

Yes, I thought so as well, for commit 46172493.

> Thus why not just changing argument for grep?
> -       if ! grep -q "$device" /proc/mounts; then
> +       if ! grep -q "${device%/}" /proc/mounts; then

Thanks! That's a better way to do it.
Will send a v4 patch later with this modification.

Best regards,
Leo

> Kind regards,
> Petr
> 
> > Reviewed-by: Petr Vorel <pvorel@suse.cz>
> 
> > Kind regards,
> > Petr
> 
> > > Reviewed-by: Yang Xu <xuyang2018.jy@fujitsu.com>
> > > >   			return
> > > >   		fi
> 

[LTP] [PATCH v3, 1/2] lib/tst_test.sh: Make tst_umount work with argument that has trailing slash

[Petr Vorel]

Hi,

...
>  	while [ "$i" -lt 50 ]; do
> -		if umount "$device" > /dev/null; then
> +		if umount "$device"/ > /dev/null; then
nit: although previous is working, I'd prefer "$device/"

Kind regards,
Petr