* [LTP] [PATCH] ipc/shmat: pick suitable base_addr before each testcase
@ 2012-10-26 10:54 Jan Stancek
2012-10-26 11:15 ` Jan Stancek
0 siblings, 1 reply; 2+ messages in thread
From: Jan Stancek @ 2012-10-26 10:54 UTC (permalink / raw)
To: ltp-list
This test picked fixed address in setup() which was used throughout
the test. There has been reports that it can fail with EINVAL.
I could reproduce it by adding single printf in between
detach/attach:
http://article.gmane.org/gmane.linux.ltp/16480
This patch picks suitable base_addr before each test. So even if glibc
would mmap extra page with addr == base_addr picked by setup(),
new suitable address will be chosen.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
---
testcases/kernel/syscalls/ipc/shmat/Makefile | 3 ++
testcases/kernel/syscalls/ipc/shmat/shmat01.c | 16 ++---------
testcases/kernel/syscalls/ipc/shmat/shmat02.c | 16 ++---------
testcases/kernel/syscalls/ipc/shmat/shmat_common.c | 29 ++++++++++++++++++++
4 files changed, 38 insertions(+), 26 deletions(-)
create mode 100644 testcases/kernel/syscalls/ipc/shmat/shmat_common.c
diff --git a/testcases/kernel/syscalls/ipc/shmat/Makefile b/testcases/kernel/syscalls/ipc/shmat/Makefile
index f467389..5cbf37c 100644
--- a/testcases/kernel/syscalls/ipc/shmat/Makefile
+++ b/testcases/kernel/syscalls/ipc/shmat/Makefile
@@ -20,4 +20,7 @@ top_srcdir ?= ../../../../..
include $(top_srcdir)/include/mk/testcases.mk
include $(abs_srcdir)/../Makefile.inc
+
+MAKE_TARGETS := $(patsubst $(abs_srcdir)/%.c,%,$(wildcard $(abs_srcdir)/*[0-9].c))
+
include $(top_srcdir)/include/mk/generic_leaf_target.mk
diff --git a/testcases/kernel/syscalls/ipc/shmat/shmat01.c b/testcases/kernel/syscalls/ipc/shmat/shmat01.c
index 6e4dee1..160abca 100644
--- a/testcases/kernel/syscalls/ipc/shmat/shmat01.c
+++ b/testcases/kernel/syscalls/ipc/shmat/shmat01.c
@@ -56,6 +56,7 @@
*/
#include "ipcshm.h"
+#include "shmat_common.c"
char *TCID = "shmat01";
@@ -108,6 +109,7 @@ int main(int ac, char **av)
/*
* Use TEST macro to make the call
*/
+ base_addr = probe_free_addr();
errno = 0;
addr = shmat(*(TC[i].shmid), base_addr+TC[i].offset,
TC[i].flags);
@@ -262,19 +264,7 @@ void setup(void)
"resource 1 in setup()");
}
- /* Probe an available linear address for attachment */
- if ((base_addr = shmat(shm_id_1, NULL, 0)) == (void *)-1) {
- tst_brkm(TBROK, cleanup, "Couldn't attach shared memory");
- }
- if (shmdt((const void *)base_addr) == -1) {
- tst_brkm(TBROK, cleanup, "Couldn't detach shared memory");
- }
-
- /* some architectures (e.g. parisc) are strange, so better always align to
- * next SHMLBA address. */
- base_addr =
- (void *)(((unsigned long)(base_addr) + (SHMLBA - 1)) &
- ~(SHMLBA - 1));
+ base_addr = probe_free_addr();
}
/*
diff --git a/testcases/kernel/syscalls/ipc/shmat/shmat02.c b/testcases/kernel/syscalls/ipc/shmat/shmat02.c
index d4cca0e..b260e18 100644
--- a/testcases/kernel/syscalls/ipc/shmat/shmat02.c
+++ b/testcases/kernel/syscalls/ipc/shmat/shmat02.c
@@ -55,6 +55,7 @@
#include "ipcshm.h"
#include <pwd.h>
+#include "shmat_common.c"
char *TCID = "shmat02";
char nobody_uid[] = "nobody";
@@ -125,6 +126,7 @@ int main(int ac, char **av)
setup_tc(i, tc);
+ base_addr = probe_free_addr();
errno = 0;
addr = shmat(*(tc->shmid), base_addr + tc->offset, 0);
@@ -181,19 +183,7 @@ void setup(void)
-1)
tst_brkm(TBROK|TERRNO, cleanup, "shmget #2 failed");
- /* Probe an available linear address for attachment */
- if ((base_addr = shmat(shm_id_2, NULL, 0)) == (void *)-1)
- tst_brkm(TBROK|TERRNO, cleanup, "shmat #1 failed");
-
- if (shmdt((const void *)base_addr) == -1)
- tst_brkm(TBROK|TERRNO, cleanup, "shmat #2 failed");
-
- /*
- * some architectures (e.g. parisc) are strange, so better always align
- * to next SHMLBA address
- */
- base_addr =
- (void *)(((unsigned long)(base_addr) & ~(SHMLBA - 1)) + SHMLBA);
+ base_addr = probe_free_addr();
}
/*
diff --git a/testcases/kernel/syscalls/ipc/shmat/shmat_common.c b/testcases/kernel/syscalls/ipc/shmat/shmat_common.c
new file mode 100644
index 0000000..826cf2d
--- /dev/null
+++ b/testcases/kernel/syscalls/ipc/shmat/shmat_common.c
@@ -0,0 +1,29 @@
+void *probe_free_addr()
+{
+ void *p;
+ int ret;
+ int shm_id = -1;
+
+ /* create a shared memory resource with read and write permissions
+ * We align this to SHMLBA so we should allocate at least
+ * SHMLBA*2 in case SHMLBA > page_size. */
+ shm_id = shmget(getipckey(), SHMLBA*2, SHM_RW | IPC_CREAT | IPC_EXCL);
+ if (shm_id == -1)
+ tst_brkm(TBROK, cleanup, "probe: shmget failed");
+
+ /* Probe an available linear address for attachment */
+ p = shmat(shm_id, NULL, 0);
+ if (p == (void *)-1)
+ tst_brkm(TBROK, cleanup, "probe: shmat failed");
+ ret = shmdt((const void *)p);
+ if (ret == -1)
+ tst_brkm(TBROK, cleanup, "probe: shmdt failed");
+
+ rm_shm(shm_id);
+
+ /* some architectures (e.g. parisc) are strange, so better always
+ * align to next SHMLBA address. */
+ p = (void *)(((unsigned long)(p) + (SHMLBA - 1)) & ~(SHMLBA - 1));
+ return p;
+}
+
--
1.7.1
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [LTP] [PATCH] ipc/shmat: pick suitable base_addr before each testcase
2012-10-26 10:54 [LTP] [PATCH] ipc/shmat: pick suitable base_addr before each testcase Jan Stancek
@ 2012-10-26 11:15 ` Jan Stancek
0 siblings, 0 replies; 2+ messages in thread
From: Jan Stancek @ 2012-10-26 11:15 UTC (permalink / raw)
To: ltp-list
----- Original Message -----
> From: "Jan Stancek" <jstancek@redhat.com>
> To: ltp-list@lists.sourceforge.net
> Sent: Friday, 26 October, 2012 12:54:37 PM
> Subject: [LTP] [PATCH] ipc/shmat: pick suitable base_addr before each testcase
>
> This test picked fixed address in setup() which was used throughout
> the test. There has been reports that it can fail with EINVAL.
>
> I could reproduce it by adding single printf in between
> detach/attach:
> http://article.gmane.org/gmane.linux.ltp/16480
>
> This patch picks suitable base_addr before each test. So even if
> glibc
> would mmap extra page with addr == base_addr picked by setup(),
> new suitable address will be chosen.
>
> Signed-off-by: Jan Stancek <jstancek@redhat.com>
I'll send v2, getipckey() appears to return only few unique
keys and after couple loops this fails because it returns key
which already exists.
Regards,
Jan
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-10-26 11:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-26 10:54 [LTP] [PATCH] ipc/shmat: pick suitable base_addr before each testcase Jan Stancek
2012-10-26 11:15 ` Jan Stancek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox