* [LTP] [RFC PATCH 1/2] Remove LTP stress tests
2018-10-15 20:18 [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions Petr Vorel
@ 2018-10-15 20:18 ` Petr Vorel
2018-10-15 20:18 ` [LTP] [RFC PATCH 2/2] Remove ltplite and runltplite.sh Petr Vorel
2018-11-05 11:43 ` [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions Petr Vorel
2 siblings, 0 replies; 9+ messages in thread
From: Petr Vorel @ 2018-10-15 20:18 UTC (permalink / raw)
To: ltp
ltpstress.sh runs stress.part[1-3]. But these runtest files just
duplicate definitions:
* stress.part1: fs, mm, nfs
* stress.part2: ipc, math, nptl
* stress.part3: net.multicast, pty, syscalls
Definitions are outdated anyway. There is no point trying trying
to keep them sync.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
doc/ltp-run-files.txt | 3 -
runtest/stress.part1 | 209 ---------
runtest/stress.part2 | 53 ---
runtest/stress.part3 | 893 ---------------------------------------
testscripts/ltpstress.sh | 349 ---------------
5 files changed, 1507 deletions(-)
delete mode 100644 runtest/stress.part1
delete mode 100644 runtest/stress.part2
delete mode 100644 runtest/stress.part3
delete mode 100755 testscripts/ltpstress.sh
diff --git a/doc/ltp-run-files.txt b/doc/ltp-run-files.txt
index f8cc36b9e..c29086987 100644
--- a/doc/ltp-run-files.txt
+++ b/doc/ltp-run-files.txt
@@ -75,9 +75,6 @@ other filesystem or disk type tests
- isofs.sh
- sysfs.sh
-LTP Stress tests
- - ltpstress.sh
-
AIO/DIO filesystem tests
- ltp-aiodio.sh
diff --git a/runtest/stress.part1 b/runtest/stress.part1
deleted file mode 100644
index 423d25e38..000000000
--- a/runtest/stress.part1
+++ /dev/null
@@ -1,209 +0,0 @@
-#DESCRIPTION:Part one for ltpstress.sh
-mm01 mmap001 -m 10000
-# 40 Mb mmap() test.
-# Creates a 10000 page mmap, touches all of the map, sync's it, and
-# munmap()s it.
-mm02 mmap001
-# simple mmap() test.
-#mm03 mmap001 -i 0 -I 1 -m 100
-# repetitive mmapping test.
-# Creates a one page map repetitively for one minute.
-
-mtest01 mtest01 -p80
-mtest01w mtest01 -p80 -w
-
-#test for race conditions
-mtest05 mmstress
-mtest06 mmap1 -x 0.05
-
-mem02 mem02
-
-# Test for mmap() page corruption. This test is meant for
-# 1 hour and more. Please change -h(hour), -m(minute) &
-# -s(seconds) settings, if default not desired
-mmap-corruption01 mmap-corruption01 -h1 -m1 -s1
-
-page01 page01
-page02 page02
-
-data_space data_space
-stack_space stack_space
-
-shmt02 shmt02
-shmt03 shmt03
-shmt04 shmt04
-shmt05 shmt05
-shmt06 shmt06
-shmt07 shmt07
-shmt08 shmt08
-shmt09 shmt09
-shmt10 shmt10
-
-cpuset01 cpuset01 -I 3600
-
-fsx-linux export TCbin=$LTPROOT/testcases/bin;fsxtest02 10000
-#fsx-ext2 fsxtest $SCRATCHDEV ext2 10000
-#fsx-ext3 fsxtest $SCRATCHDEV ext3 10000
-#fsx-jfs fsxtest $SCRATCHDEV jfs 10000
-#fsx-xfs fsxtest $SCRATCHDEV xfs 10000
-#fsx-reiserfs fsxtest $SCRATCHDEV reiserfs 10000
-
-## Complete a default run.
-dio01 diotest1
-dio02 diotest2
-dio03 diotest3
-dio04 diotest4
-dio05 diotest5
-dio06 diotest6
-
-## Run the tests with larger buffersize
-dio07 diotest1 -b 65536
-dio08 diotest2 -b 65536
-dio09 diotest3 -b 65536
-dio10 diotest4 -b 65536
-dio11 diotest5 -b 65536
-dio12 diotest6 -b 65536
-
-### Run the tests with larger iterations
-dio13 diotest1 -b 65536 -n 2000
-dio14 diotest2 -b 65536 -i 1000
-dio15 diotest3 -b 65536 -i 1000
-dio16 diotest5 -b 65536 -i 1000
-dio17 diotest6 -b 65536 -i 1000
-
-## Run the tests with larger offset - 1MB
-dio18 diotest2 -b 65536 -i 1000 -o 1024000
-dio19 diotest3 -b 65536 -i 1000 -o 1024000
-dio20 diotest5 -b 65536 -i 1000 -o 1024000
-dio21 diotest6 -b 65536 -i 1000 -o 1024000
-
-## Run the tests with larger offset - 100 MB
-dio22 diotest2 -b 65536 -i 1000 -o 104857600
-dio23 diotest3 -b 65536 -i 1000 -o 104857600
-dio24 diotest5 -b 65536 -i 1000 -o 104857600
-dio25 diotest6 -b 65536 -i 1000 -o 104857600
-
-### Run tests with larger vector array
-dio26 diotest6 -b 8192 -v 100
-dio27 diotest6 -b 8192 -o 1024000 -i 1000 -v 100
-dio28 diotest6 -b 8192 -o 1024000 -i 1000 -v 200
-
-### Run the tests with more children
-#dio29 diotest3 -b 65536 -n 100 -i 1000 -o 1024000
-#dio30 diotest6 -b 65536 -n 100 -i 1000 -o 1024000
-#
-# RAW DEVICE TEST SECTION
-# DEV1 and DEV2 should be exported prior to execution or
-# replaced with the actual device ids, i.e.
-# dio33 diotest1 -i /dev/sda2 -o /dev/sda3
-#
-### Run the tests with raw device
-#dio33 diotest1 -i $DEV1 -o $DEV2
-#dio34 diotest2 -f $DEV1
-#dio36 diotest3 -f $DEV1
-#dio37 diotest5 -f $DEV1
-#dio38 diotest6 -f $DEV1
-#
-### Run the tests with raw device and larger iterations
-#dio39 diotest1 -b 65536 -n 2000 -i $DEV1 -o $DEV2
-#dio40 diotest2 -b 65536 -i 1000 -f $DEV1
-#dio41 diotest3 -b 65536 -i 1000 -f $DEV1
-#dio42 diotest5 -b 65536 -i 1000 -f $DEV1
-#dio43 diotest6 -b 65536 -i 1000 -f $DEV1
-#
-## Run the tests with raw device and larger offset - 100 MB
-#dio44 diotest2 -b 65536 -i 1000 -o 104857600 -f $DEV1
-#dio45 diotest3 -b 65536 -i 1000 -o 104857600 -f $DEV1
-#dio46 diotest5 -b 65536 -i 1000 -o 104857600 -f $DEV1
-#dio47 diotest6 -b 65536 -i 1000 -o 104857600 -f $DEV1
-
-gf01 growfiles -W gf01 -b -e 1 -u -i 0 -L 20 -w -C 1 -l -I r -T 10 glseek20 glseek20.2
-gf02 growfiles -W gf02 -b -e 1 -L 10 -i 100 -I p -S 2 -u -f gf03_
-gf03 growfiles -W gf03 -b -e 1 -g 1 -i 1 -S 150 -u -f gf05_
-gf04 growfiles -W gf04 -b -e 1 -g 4090 -i 500 -t 39000 -u -f gf06_
-gf05 growfiles -W gf05 -b -e 1 -g 5000 -i 500 -t 49900 -T10 -c9 -I p -u -f gf07_
-gf06 growfiles -W gf06 -b -e 1 -u -r 1-5000 -R 0--1 -i 0 -L 30 -C 1 g_rand10 g_rand10.2
-gf07 growfiles -W gf07 -b -e 1 -u -r 1-5000 -R 0--2 -i 0 -L 30 -C 1 -I p g_rand13 g_rand13.2
-gf08 growfiles -W gf08 -b -e 1 -u -r 1-5000 -R 0--2 -i 0 -L 30 -C 1 g_rand11 g_rand11.2
-gf09 growfiles -W gf09 -b -e 1 -u -r 1-5000 -R 0--1 -i 0 -L 30 -C 1 -I p g_rand12 g_rand12.2
-gf10 growfiles -W gf10 -b -e 1 -u -r 1-5000 -i 0 -L 30 -C 1 -I l g_lio14 g_lio14.2
-gf11 growfiles -W gf11 -b -e 1 -u -r 1-5000 -i 0 -L 30 -C 1 -I L g_lio15 g_lio15.2
-gf12 mkfifo gffifo17; growfiles -W gf12 -b -e 1 -u -i 0 -L 30 gffifo17
-gf13 mkfifo gffifo18; growfiles -W gf13 -b -e 1 -u -i 0 -L 30 -I r -r 1-4096 gffifo18
-gf14 growfiles -W gf14 -b -e 1 -u -i 0 -L 20 -w -l -C 1 -T 10 glseek19 glseek19.2
-gf15 growfiles -W gf15 -b -e 1 -u -r 1-49600 -I r -u -i 0 -L 120 Lgfile1
-gf16 growfiles -W gf16 -b -e 1 -i 0 -L 120 -u -g 4090 -T 100 -t 408990 -l -C 10 -c 1000 -S 10 -f Lgf02_
-gf17 growfiles -W gf17 -b -e 1 -i 0 -L 120 -u -g 5000 -T 100 -t 499990 -l -C 10 -c 1000 -S 10 -f Lgf03_
-gf18 growfiles -W gf18 -b -e 1 -i 0 -L 120 -w -u -r 10-5000 -I r -l -S 2 -f Lgf04_
-gf19 growfiles -W gf19 -b -e 1 -g 5000 -i 500 -t 49900 -T10 -c9 -I p -o O_RDWR,O_CREAT,O_TRUNC -u -f gf08i_
-gf20 growfiles -W gf20 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -r 1-256000:512 -R 512-256000 -T 4 gfbigio-$$
-gf21 growfiles -W gf21 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -g 20480 -T 10 -t 20480 gf-bld-$$
-gf22 growfiles -W gf22 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -g 20480 -T 10 -t 20480 gf-bldf-$$
-gf23 growfiles -W gf23 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -r 512-64000:1024 -R 1-384000 -T 4 gf-inf-$$
-gf24 growfiles -W gf24 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -g 20480 gf-jbld-$$
-gf25 growfiles -W gf25 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -r 1024000-2048000:2048 -R 4095-2048000 -T 1 gf-large-gs-$$
-gf26 growfiles -W gf26 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -r 128-32768:128 -R 512-64000 -T 4 gfsmallio-$$
-gf27 growfiles -W gf27 -b -D 0 -w -g 8b -C 1 -b -i 1000 -u gfsparse-1-$$
-gf28 growfiles -W gf28 -b -D 0 -w -g 16b -C 1 -b -i 1000 -u gfsparse-2-$$
-gf29 growfiles -W gf29 -b -D 0 -r 1-4096 -R 0-33554432 -i 0 -L 60 -C 1 -u gfsparse-3-$$
-gf30 growfiles -W gf30 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -o O_RDWR,O_CREAT,O_SYNC -g 20480 -T 10 -t 20480 gf-sync-$$
-rwtest01 export LTPROOT; rwtest -N rwtest01 -c -q -i 60s -f sync 10%25000:rw-sync-$$
-rwtest02 export LTPROOT; rwtest -N rwtest02 -c -q -i 60s -f buffered 10%25000:rw-buffered-$$
-rwtest03 export LTPROOT; rwtest -N rwtest03 -c -q -i 60s -n 2 -f buffered -s mmread,mmwrite -m random -Dv 10%25000:mm-buff-$$
-rwtest04 export LTPROOT; rwtest -N rwtest04 -c -q -i 60s -n 2 -f sync -s mmread,mmwrite -m random -Dv 10%25000:mm-sync-$$
-rwtest05 export LTPROOT; rwtest -N rwtest05 -c -q -i 50 -T 64b 500b:/tmp/rwtest01%f
-
-#must be run as root
-#iogen01 iogen -i 120s -s read,write 500b:doio.f1.$$ 1000b:doio.f2.$$ | doio -akv -n 2
-iogen01 export LTPROOT; rwtest -N iogen01 -i 120s -s read,write -Da -Dv -n 2 500b:doio.f1.$$ 1000b:doio.f2.$$
-
-fs_inod01 fs_inod $TMPDIR 10 10 1
-linker01 linktest.sh 1000 1000
-openfile01 openfile -f10 -t10
-inode01 inode01
-inode02 inode02
-stream01 stream01
-stream02 stream02
-stream03 stream03
-stream04 stream04
-stream05 stream05
-ftest01 ftest01
-ftest02 ftest02
-ftest03 ftest03
-ftest04 ftest04
-ftest05 ftest05
-ftest06 ftest06
-ftest07 ftest07
-ftest08 ftest08
-
-nfs01 export VERSION=2 SOCKET_TYPE=udp; nfs01
-nfs01 export VERSION=2 SOCKET_TYPE=tcp; nfs01
-nfs01 export VERSION=3 SOCKET_TYPE=udp; nfs01
-nfs01 export VERSION=3 SOCKET_TYPE=tcp; nfs01
-
-nfs02 export VERSION=2 SOCKET_TYPE=udp; nfs02
-nfs02 export VERSION=2 SOCKET_TYPE=tcp; nfs02
-nfs02 export VERSION=3 SOCKET_TYPE=udp; nfs02
-nfs02 export VERSION=3 SOCKET_TYPE=tcp; nfs02
-
-nfs03 export VERSION=2 SOCKET_TYPE=udp; nfs03
-nfs03 export VERSION=2 SOCKET_TYPE=tcp; nfs03
-nfs03 export VERSION=3 SOCKET_TYPE=udp; nfs03
-nfs03 export VERSION=3 SOCKET_TYPE=tcp; nfs03
-
-nfs04 export VERSION=2 SOCKET_TYPE=udp; nfs04
-nfs04 export VERSION=2 SOCKET_TYPE=tcp; nfs04
-nfs04 export VERSION=3 SOCKET_TYPE=udp; nfs04
-nfs04 export VERSION=3 SOCKET_TYPE=tcp; nfs04
-
-nfs05 export VERSION=2 SOCKET_TYPE=udp; nfs05
-nfs05 export VERSION=2 SOCKET_TYPE=tcp; nfs05
-nfs05 export VERSION=3 SOCKET_TYPE=udp; nfs05
-nfs05 export VERSION=3 SOCKET_TYPE=tcp; nfs05
-
-nfsx-linux export VERSION=2 SOCKET_TYPE=udp; export TCbin=$LTPROOT/testcases/bin; fsx.sh
-nfsx-linux export VERSION=2 SOCKET_TYPE=tcp; export TCbin=$LTPROOT/testcases/bin; fsx.sh
-nfsx-linux export VERSION=3 SOCKET_TYPE=udp; export TCbin=$LTPROOT/testcases/bin; fsx.sh
-nfsx-linux export VERSION=3 SOCKET_TYPE=tcp; export TCbin=$LTPROOT/testcases/bin; fsx.sh
-
-
diff --git a/runtest/stress.part2 b/runtest/stress.part2
deleted file mode 100644
index 74357081a..000000000
--- a/runtest/stress.part2
+++ /dev/null
@@ -1,53 +0,0 @@
-#DESCRIPTION:Part two for ltpstress.sh
-abs01 abs01
-
-atof01 atof01
-
-float_bessel float_bessel -D $LTPROOT/testcases/bin -v
-float_exp_log float_exp_log -D $LTPROOT/testcases/bin -v
-float_iperb float_iperb -D $LTPROOT/testcases/bin -v
-float_power float_power -D $LTPROOT/testcases/bin -v
-float_trigo float_trigo -D $LTPROOT/testcases/bin -v
-
-fptest01 fptest01
-fptest02 fptest02
-
-nextafter01 nextafter01
-pth_str01 pth_str01
-pth_str02 pth_str02 -n1000
-pth_str03 pth_str03
-
-
-# These tests use tests/pipeio to put pipes (named or unnamed) through a workout
-#
-pipeio_1 pipeio -T pipeio_1 -c 5 -s 4090 -i 100 -b -f x80
-# spawns 5 children to write 100 chunks of 4090 bytes to a named pipe
-# using blocking I/O
-#pipeio_2 pipeio -T pipeio_2 -c 5 -s 4090 -i 100 -f x80
-# spawns 5 children to write 100 chunks of 4090 bytes to a named pipe
-# using non-blocking I/O
-# This test hits EAGAIN, which pipeio doesn't handle at the moment
-pipeio_3 pipeio -T pipeio_3 -c 5 -s 4090 -i 100 -u -b -f x80
-# spawns 5 children to write 100 chunks of 4090 bytes to an unnamed pipe
-# using blocking I/O
-pipeio_4 pipeio -T pipeio_4 -c 5 -s 4090 -i 100 -u -f x80
-# spawns 5 children to write 100 chunks of 4090 bytes to an unnamed pipe
-# using non-blocking I/O
-pipeio_5 pipeio -T pipeio_5 -c 5 -s 5000 -i 10 -b -f x80
-# spawns 5 children to write 10 chunks of 5000 bytes to a named pipe
-# using blocking I/O
-pipeio_6 pipeio -T pipeio_6 -c 5 -s 5000 -i 10 -b -u -f x80
-# spawns 5 children to write 10 chunks of 5000 bytes to an unnamed pipe
-# using blocking I/O
-#pipeio_7 pipeio -T pipeio_7 -c 5 -s 5000 -i 10 -f x80
-# spawns 5 children to write 10 chunks of 5000 bytes to a named pipe
-# using non-blocking I/O
-# This test hits EAGAIN, which pipeio doesn't handle at the moment
-pipeio_8 pipeio -T pipeio_8 -c 5 -s 5000 -i 10 -u -f x80
-# spawns 5 children to write 10 chunks of 5000 bytes to an unnamed pipe
-# using non-blocking I/O
-
-sem01 sem01
-sem02 sem02
-
-nptl01 nptl01
diff --git a/runtest/stress.part3 b/runtest/stress.part3
deleted file mode 100644
index 3de70c99b..000000000
--- a/runtest/stress.part3
+++ /dev/null
@@ -1,893 +0,0 @@
-#DESCRIPTION:Part three for ltpstress.sh
-abort01 abort01
-
-accept01 accept01
-
-access01 access01
-access02 access02
-access03 access03
-access04 access04
-
-acct01 acct01
-
-adjtimex01 adjtimex01
-adjtimex02 adjtimex02
-
-alarm02 alarm02
-alarm03 alarm03
-alarm05 alarm05
-alarm06 alarm06
-alarm07 alarm07
-
-asyncio02 asyncio02
-
-bind01 bind01
-bind02 bind02
-
-brk01 brk01
-
-capget01 capget01
-capget02 capget02
-
-capset01 capset01
-capset02 capset02
-
-chdir01 chdir01
-chdir01A symlink01 -T chdir01
-chdir02 chdir02
-chdir03 chdir03
-chdir04 chdir04
-
-chmod01 chmod01
-chmod01A symlink01 -T chmod01
-chmod02 chmod02
-chmod03 chmod03
-chmod04 chmod04
-chmod05 chmod05
-chmod06 chmod06
-chmod07 chmod07
-
-chown01 chown01
-chown02 chown02
-chown03 chown03
-chown04 chown04
-chown05 chown05
-
-chroot01 chroot01
-chroot02 chroot02
-chroot03 chroot03
-chroot04 chroot04
-
-clone01 clone01
-clone02 clone02
-clone03 clone03
-clone04 clone04
-clone05 clone05
-clone06 clone06
-clone07 clone07
-clone08 clone08
-
-close01 close01
-close02 close02
-close08 close08
-
-confstr01 confstr01
-
-connect01 connect01
-
-creat01 creat01
-creat03 creat03
-creat04 creat04
-creat05 creat05
-creat06 creat06
-creat07 creat07
-creat08 creat08
-
-dup01 dup01
-dup02 dup02
-dup03 dup03
-dup04 dup04
-dup05 dup05
-dup06 dup06
-dup07 dup07
-
-dup201 dup201
-dup202 dup202
-dup203 dup203
-dup204 dup204
-dup205 dup205
-
-epoll_ctl01 epoll_ctl01
-epoll_ctl02 epoll_ctl02
-
-epoll_wait01 epoll_wait01
-epoll_wait02 epoll_wait02
-epoll_wait03 epoll_wait03
-
-epoll_pwait01 epoll_pwait01
-
-execl01 execl01
-execle01 execle01
-execlp01 execlp01
-
-execv01 execv01
-execve01 execve01
-execve02 execve02
-execve03 execve03
-execve04 execve04
-execve05 execve05 -i 5 -n 32
-execvp01 execvp01
-
-exit01 exit01
-exit02 exit02
-
-fchdir01 fchdir01
-fchdir02 fchdir02
-fchdir03 fchdir03
-
-fchmod01 fchmod01
-fchmod02 fchmod02
-fchmod03 fchmod03
-fchmod04 fchmod04
-fchmod05 fchmod05
-fchmod06 fchmod06
-
-fchown01 fchown01
-fchown02 fchown02
-fchown03 fchown03
-fchown04 fchown04
-fchown05 fchown05
-
-fcntl01 fcntl01
-fcntl03 fcntl03
-fcntl04 fcntl04
-fcntl05 fcntl05
-fcntl06 fcntl06
-fcntl07 fcntl07
-fcntl08 fcntl08
-fcntl09 fcntl09
-fcntl10 fcntl10
-fcntl11 fcntl11
-fcntl12 fcntl12
-fcntl13 fcntl13
-fcntl14 fcntl14
-#fcntl16 fcntl16 #Contains errors.
-fcntl17 fcntl17
-fcntl18 fcntl18
-fcntl19 fcntl19
-fcntl20 fcntl20
-fcntl21 fcntl21
-fcntl22 fcntl22
-fcntl23 fcntl23
-fcntl24 fcntl24
-fcntl25 fcntl25
-fcntl26 fcntl26
-# The tests for these system calls fcntl27 and fcntl28 are temporarily being disabled
-# fcntl27 fcntl27
-# fcntl28 fcntl28
-fcntl29 fcntl29
-fcntl30 fcntl30
-fcntl31 fcntl31
-fcntl32 fcntl32
-fcntl33 fcntl33
-
-fdatasync01 fdatasync01
-fdatasync02 fdatasync02
-
-flock01 flock01
-flock02 flock02
-flock03 flock03
-flock04 flock04
-flock06 flock06
-
-fmtmsg01 fmtmsg01
-
-fork01 fork01
-fork02 fork02
-fork03 fork03
-fork04 fork04
-fork05 fork05
-fork06 fork06
-fork07 fork07
-fork08 fork08
-fork09 fork09
-fork10 fork10
-fork11 fork11
-
-fpathconf01 fpathconf01
-
-fstat01 fstat01
-fstat02 fstat02
-fstat03 fstat03
-fstat05 fstat05
-
-fstatfs01 fstatfs01
-fstatfs02 fstatfs02
-
-fsync01 fsync01
-fsync02 fsync02
-fsync03 fsync03
-
-ftruncate01 ftruncate01
-ftruncate02 ftruncate02
-ftruncate03 ftruncate03
-ftruncate04 ftruncate04
-
-getcontext01 getcontext01
-
-getcwd01 getcwd01
-getcwd02 getcwd02
-getcwd03 getcwd03
-getcwd04 getcwd04
-getcwd05 getcwd05
-
-getdents01 getdents01
-getdents02 getdents02
-
-getdomainname01 getdomainname01
-
-getdtablesize01 getdtablesize01
-
-getegid01 getegid01
-
-geteuid01 geteuid01
-geteuid02 geteuid02
-
-getgid01 getgid01
-getgid03 getgid03
-
-getgroups01 getgroups01
-
-gethostid01 gethostid01
-
-gethostname01 gethostname01
-
-getitimer01 getitimer01
-getitimer02 getitimer02
-getitimer03 getitimer03
-
-getpagesize01 getpagesize01
-
-getpeername01 getpeername01
-
-getpgid01 getpgid01
-getpgid02 getpgid02
-
-getpgrp01 getpgrp01
-
-getpid01 getpid01
-getpid02 getpid02
-
-getppid01 getppid01
-getppid02 getppid02
-
-getpriority01 getpriority01
-getpriority02 getpriority02
-
-getresgid01 getresgid01
-getresgid02 getresgid02
-getresgid03 getresgid03
-
-getresuid01 getresuid01
-getresuid02 getresuid02
-getresuid03 getresuid03
-
-getrlimit01 getrlimit01
-getrlimit02 getrlimit02
-
-getrusage01 getrusage01
-getrusage02 getrusage02
-
-getsid01 getsid01
-getsid02 getsid02
-
-getsockname01 getsockname01
-
-getsockopt01 getsockopt01
-
-gettimeofday01 gettimeofday01
-gettimeofday02 gettimeofday02
-
-getuid01 getuid01
-getuid03 getuid03
-
-ioperm01 ioperm01
-ioperm02 ioperm02
-
-iopl01 iopl01
-iopl02 iopl02
-
-kill01 kill01
-kill02 kill02
-kill03 kill03
-kill04 kill04
-kill05 kill05
-kill06 kill06
-kill07 kill07
-kill08 kill08
-kill09 kill09
-kill10 kill10
-kill11 kill11
-kill12 kill12
-
-lchown01 lchown01
-lchown02 lchown02
-lchown03 lchown03
-
-link01 symlink01 -T link01
-link02 link02
-link03 link03
-link04 link04
-link05 link05
-link06 link06
-link07 link07
-link08 link08
-
-listen01 listen01
-
-llseek01 llseek01
-llseek02 llseek02
-llseek03 llseek03
-
-lseek01 lseek01
-lseek02 lseek02
-lseek07 lseek07
-lseek11 lseek11
-
-lstat01A symlink01 -T lstat01
-lstat01 lstat01
-lstat02 lstat02
-lstat03 lstat03
-
-mallopt01 mallopt01
-
-memset01 memset01
-memcmp01 memcmp01
-memcpy01 memcpy01
-
-mlockall01 mlockall01
-mlockall02 mlockall02
-mlockall03 mlockall03
-
-mkdir02 mkdir02
-mkdir03 mkdir03
-mkdir04 mkdir04
-mkdir05 mkdir05
-mkdir05A symlink01 -T mkdir05
-mkdir09 mkdir09
-
-mknod01 mknod01
-mknod02 mknod02
-mknod03 mknod03
-mknod04 mknod04
-mknod05 mknod05
-mknod06 mknod06
-mknod07 mknod07
-mknod08 mknod08
-mknod09 mknod09
-
-mlock01 mlock01
-mlock02 mlock02
-
-mlock201 mlock201
-mlock202 mlock202
-mlock203 mlock203
-
-qmm01 mmap001 -m 1
-mmap01 mmap01
-mmap02 mmap02
-mmap03 mmap03
-mmap04 mmap04
-mmap05 mmap05
-mmap06 mmap06
-mmap07 mmap07
-mmap08 mmap08
-mmap09 mmap09
-mmap16 mmap16 -i 5
-
-modify_ldt01 modify_ldt01
-modify_ldt02 modify_ldt02
-modify_ldt03 modify_ldt03
-
-mprotect01 mprotect01
-mprotect02 mprotect02
-mprotect03 mprotect03
-mprotect04 mprotect04
-
-mremap01 mremap01
-mremap02 mremap02
-mremap03 mremap03
-mremap04 mremap04
-
-msgctl01 msgctl01
-msgctl02 msgctl02
-msgctl03 msgctl03
-msgctl04 msgctl04
-msgstress01 msgstress01
-msgstress02 msgstress02
-
-msgget01 msgget01
-msgget02 msgget02
-msgget03 msgget03
-
-msgrcv01 msgrcv01
-msgrcv02 msgrcv02
-msgrcv03 msgrcv03
-msgrcv04 msgrcv04
-msgrcv05 msgrcv05
-msgrcv06 msgrcv06
-msgrcv07 msgrcv07
-
-msgsnd01 msgsnd01
-msgsnd02 msgsnd02
-msgsnd05 msgsnd05
-msgsnd06 msgsnd06
-
-msync01 msync01
-msync02 msync02
-msync03 msync03
-
-munlock01 munlock01
-munlock02 munlock02
-
-munlockall01 munlockall01
-
-munmap01 munmap01
-munmap02 munmap02
-munmap03 munmap03
-
-nanosleep01 nanosleep01
-nanosleep03 nanosleep03
-nanosleep04 nanosleep04
-
-nftw01 nftw01
-nftw6401 nftw6401
-
-nice01 nice01
-nice02 nice02
-nice03 nice03
-nice04 nice04
-
-open01 open01
-open01A symlink01 -T open01
-open02 open02
-open03 open03
-open04 open04
-open05 open05
-open06 open06
-open07 open07
-open08 open08
-open09 open09
-open10 open10
-open11 open11
-open12 open12
-open13 open13
-
-pathconf01 pathconf01
-
-pause01 pause01
-pause02 pause02
-pause03 pause03
-
-pipe01 pipe01
-pipe02 pipe02
-pipe03 pipe03
-pipe04 pipe04
-pipe05 pipe05
-pipe06 pipe06
-pipe07 pipe07
-pipe08 pipe08
-pipe09 pipe09
-pipe10 pipe10
-pipe11 pipe11
-
-poll01 poll01
-
-prctl01 prctl01
-prctl02 prctl02
-prctl03 prctl03
-
-pread01 pread01
-pread02 pread02
-pread03 pread03
-
-preadv01 preadv01
-preadv02 preadv02
-preadv03 preadv03
-
-preadv201 preadv201
-preadv202 preadv202
-
-profil01 profil01
-
-pselect01 pselect01
-pselect02 pselect02
-
-ptrace01 ptrace01
-ptrace02 ptrace02
-ptrace03 ptrace03
-
-pwrite01 pwrite01
-pwrite02 pwrite02
-pwrite04 pwrite04
-
-pwrite01_64 pwrite01_64
-pwrite02_64 pwrite02_64
-pwrite04_64 pwrite04_64
-
-pwritev01 pwritev01
-pwritev02 pwritev02
-pwritev03 pwritev03
-
-read01 read01
-read02 read02
-read03 read03
-read04 read04
-
-readdir01 readdir01
-readdir02 readdir02
-readdir21 readdir21
-
-readlink01A symlink01 -T readlink01
-readlink01 readlink01
-readlink03 readlink03
-
-readv01 readv01
-readv02 readv02
-readv03 readv03
-
-reboot01 reboot01
-reboot02 reboot02
-
-recv01 recv01
-
-recvfrom01 recvfrom01
-
-recvmsg01 recvmsg01
-
-rename01 rename01
-rename01A symlink01 -T rename01
-rename02 rename02
-rename03 rename03
-rename04 rename04
-rename05 rename05
-rename06 rename06
-rename07 rename07
-rename08 rename08
-rename09 rename09
-rename10 rename10
-rename11 rename11
-rename12 rename12
-rename13 rename13
-rename14 rename14
-
-rmdir01 rmdir01
-rmdir02 rmdir02
-rmdir03 rmdir03
-rmdir03A symlink01 -T rmdir03
-
-sbrk01 sbrk01
-sbrk02 sbrk02
-
-sched_get_priority_max01 sched_get_priority_max01
-sched_get_priority_max02 sched_get_priority_max02
-
-sched_get_priority_min01 sched_get_priority_min01
-sched_get_priority_min02 sched_get_priority_min02
-
-sched_getparam01 sched_getparam01
-sched_getparam02 sched_getparam02
-sched_getparam03 sched_getparam03
-
-sched_rr_get_interval01 sched_rr_get_interval01
-sched_rr_get_interval02 sched_rr_get_interval02
-sched_rr_get_interval03 sched_rr_get_interval03
-
-sched_setparam01 sched_setparam01
-sched_setparam02 sched_setparam02
-sched_setparam03 sched_setparam03
-sched_setparam04 sched_setparam04
-sched_setparam05 sched_setparam05
-
-sched_getscheduler01 sched_getscheduler01
-sched_getscheduler02 sched_getscheduler02
-
-sched_setscheduler01 sched_setscheduler01
-sched_setscheduler02 sched_setscheduler02
-
-sched_yield01 sched_yield01
-
-select01 select01
-select02 select02
-select03 select03
-
-semctl02 semctl02
-semctl03 semctl03
-semctl04 semctl04
-semctl05 semctl05
-semctl06 semctl06
-semctl07 semctl07
-
-semget01 semget01
-semget02 semget02
-semget03 semget03
-semget05 semget05
-semget06 semget06
-
-semop01 semop01
-semop02 semop02
-semop03 semop03
-semop04 semop04
-semop05 semop05
-
-send01 send01
-
-sendfile02 sendfile02
-sendfile03 sendfile03
-
-sendmsg01 sendmsg01
-
-sendto01 sendto01
-
-setdomainname01 setdomainname01
-setdomainname02 setdomainname02
-setdomainname03 setdomainname03
-
-setfsgid01 setfsgid01
-
-setfsuid01 setfsuid01
-
-setgid01 setgid01
-setgid02 setgid02
-setgid03 setgid03
-
-setegid01 setegid01
-setegid02 setegid02
-
-setgroups01 setgroups01
-setgroups02 setgroups02
-setgroups03 setgroups03
-setgroups04 setgroups04
-
-sethostname01 sethostname01
-sethostname02 sethostname02
-sethostname03 sethostname03
-
-setitimer01 setitimer01
-setitimer02 setitimer02
-setitimer03 setitimer03
-
-setpgid01 setpgid01
-setpgid02 setpgid02
-setpgid03 setpgid03
-
-setpgrp01 setpgrp01
-setpgrp02 setpgrp02
-
-setpriority01 setpriority01
-setpriority02 setpriority02
-
-setregid01 setregid01
-setregid02 setregid02
-setregid03 setregid03
-setregid04 setregid04
-
-setresgid01 setresgid01
-setresgid02 setresgid02
-setresgid03 setresgid03
-setresgid04 setresgid04
-
-setresuid01 setresuid01
-setresuid02 setresuid02
-setresuid03 setresuid03
-setresuid04 setresuid04
-setresuid05 setresuid05
-
-setreuid01 setreuid01
-setreuid02 setreuid02
-setreuid03 setreuid03
-setreuid04 setreuid04
-setreuid05 setreuid05
-setreuid06 setreuid06
-setreuid07 setreuid07
-
-setrlimit01 setrlimit01
-setrlimit02 setrlimit02
-setrlimit03 setrlimit03
-
-setsid01 setsid01
-
-setsockopt01 setsockopt01
-
-settimeofday01 settimeofday01
-settimeofday02 settimeofday02
-
-setuid01 setuid01
-setuid03 setuid03
-setuid04 setuid04
-
-shmat01 shmat01
-shmat02 shmat02
-
-shmctl02 shmctl02
-shmctl03 shmctl03
-shmctl04 shmctl04
-
-shmdt01 shmdt01
-shmdt02 shmdt02
-
-shmget01 shmget01
-shmget02 shmget02
-shmget03 shmget03
-shmget04 shmget04
-shmget05 shmget05
-
-sigaction01 sigaction01
-sigaction02 sigaction02
-
-
-sigaltstack01 sigaltstack01
-sigaltstack02 sigaltstack02
-
-
-
-sighold02 sighold02
-
-
-signal01 signal01
-signal02 signal02
-signal03 signal03
-signal04 signal04
-signal05 signal05
-signal06 signal06
-
-sigpending02 sigpending02
-
-sigprocmask01 sigprocmask01
-
-sigrelse01 sigrelse01
-
-sigsuspend01 sigsuspend01
-
-
-socket01 socket01
-
-socketcall01 socketcall01
-socketcall02 socketcall02
-socketcall03 socketcall03
-socketcall04 socketcall04
-
-socketpair01 socketpair01
-
-sockioctl01 sockioctl01
-
-stat01 stat01
-stat02 stat02
-stat03 stat03
-stat04 symlink01 -T stat04
-stat05 stat05
-stat06 stat06
-
-statfs01 statfs01
-statfs02 statfs02
-statfs03 statfs03
-
-statvfs01 statvfs01
-statvfs02 statvfs02
-
-# This syscall is obsoleted by settimeofday.
-#stime01 stime01
-#stime02 stime02
-
-string01 string01
-
-swapoff01 swapoff01
-swapoff02 swapoff02
-
-swapon01 swapon01
-swapon02 swapon02
-swapon03 swapon03
-
-symlink01 symlink01
-symlink02 symlink02
-symlink03 symlink03
-symlink04 symlink04
-symlink05 symlink05
-
-syscall01 syscall01
-
-sysconf01 sysconf01
-
-sysctl01 sysctl01
-sysctl03 sysctl03
-sysctl04 sysctl04
-
-sysfs01 sysfs01
-sysfs02 sysfs02
-sysfs03 sysfs03
-sysfs04 sysfs04
-sysfs05 sysfs05
-sysfs06 sysfs06
-
-sysinfo01 sysinfo01
-sysinfo02 sysinfo02
-
-# This syscall is obsoleted by gettimeofday.
-#time01 time01
-#time02 time02
-
-times01 times01
-times03 times03
-
-truncate01 truncate01
-truncate02 truncate02
-truncate03 truncate03
-
-# This syscall is obsolete. The latest glibc does not even
-# include the ulimit.h file anymore. The test will fail
-# because the error handling has been simplified.
-#
-# ulimit01 ulimit01
-
-umask01 umask01
-
-uname01 uname01
-uname02 uname02
-uname03 uname03
-
-unlink01 symlink01 -T unlink01
-unlink05 unlink05
-unlink07 unlink07
-unlink08 unlink08
-
-utime01 utime01
-utime01A symlink01 -T utime01
-utime02 utime02
-utime03 utime03
-utime04 utime04
-utime05 utime05
-utime06 utime06
-
-vfork01 vfork01
-vfork02 vfork02
-
-vhangup01 vhangup01
-vhangup02 vhangup02
-
-wait01 wait01
-wait02 wait02
-
-wait401 wait401
-wait402 wait402
-
-waitpid01 waitpid01
-waitpid02 waitpid02
-waitpid03 waitpid03
-waitpid04 waitpid04
-waitpid05 waitpid05
-waitpid06 waitpid06
-waitpid07 waitpid07
-waitpid08 waitpid08
-waitpid09 waitpid09
-waitpid10 waitpid10
-waitpid11 waitpid11
-waitpid12 waitpid12
-waitpid13 waitpid13
-
-write01 write01
-write03 write03
-write04 write04
-write05 write05
-
-writev01 writev01
-writev02 writev02
-writev05 writev05
-writev06 writev06
-writev07 writev07
-
-pty01 pty01
-hangup01 hangup01
-
-mc_cmds mc_cmds
-mc_opts export TCsrc=$LTPROOT/testcases/network/multicast/mc_opts; mc_opts
-rpc01 rpc01
diff --git a/testscripts/ltpstress.sh b/testscripts/ltpstress.sh
deleted file mode 100755
index cd041b1d7..000000000
--- a/testscripts/ltpstress.sh
+++ /dev/null
@@ -1,349 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) International Business Machines Corp., 2003
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-#
-# FILE : ltpstress.sh
-# DESCRIPTION : A script that will stress your system using the LTP testsuite.
-# REQUIREMENTS:
-# 1) The 'rsh' daemon must be running and NFS (versions 2 &3) must be
-# configured into the kernel and installed for networking tests.
-# 2) The 'sar' application must be installed to use the "-S" option
-# HISTORY :
-# 02/11/2003 Robbie Williamson (robbiew@austin.ibm.com)
-# written
-# 11/20/2008 Aime Le Rouzic (aime.lerouzic@bull.net)
-# adapt script to work with portmap and rpcbind
-##############################################################
-
-export LTPROOT=${PWD}
-echo $LTPROOT | grep testscripts > /dev/null 2>&1
-if [ $? -eq 0 ]; then
- cd ..
- export LTPROOT=${PWD}
-fi
-export TMPBASE="/tmp"
-export PATH=$LTPROOT/testcases/bin:$PATH
-memsize=0
-hours=24
-PROC_NUM=0
-leftover_memsize=0
-duration=86400
-datafile="/tmp/ltpstress.data"
-iofile="/tmp/ltpstress.iodata"
-logfile="/tmp/ltpstress.log"
-interval=10
-Sar=0
-Top=0
-Iostat=0
-LOGGING=0
-PRETTY_PRT=""
-QUIET_MODE=""
-NO_NETWORK=0
-
-usage()
-{
-
- cat <<-END >&2
- usage: ${0##*/} [ -d datafile ] [ -i # (in seconds) ] [ -I iofile ] [ -l logfile ] [ -m # (in Mb) ]
- [ -n ] [ -p ] [ -q ] [ -t duration ] [ -x TMPDIR ] [-b DEVICE] [-B LTP_DEV_FS_TYPE] [ [-S]|[-T] ]
-
- -d datafile Data file for 'sar' or 'top' to log to. Default is "/tmp/ltpstress.data".
- -i # (in sec) Interval that 'sar' or 'top' should take snapshots. Default is 10 seconds.
- -I iofile Log results of 'iostat' to a file every interval. Default is "/tmp/ltpstress.iodata".
- -l logfile Log results of test in a logfile. Default is "/tmp/ltpstress.log"
- -m # (in Mb) Specify the _minimum_ memory load of # megabytes in background. Default is all the RAM + 1/2 swap.
- -n Disable networking stress.
- -p Human readable format logfiles.
- -q Print less verbose output to the output files.
- -S Use 'sar' to measure data.
- -T Use LTP's modified 'top' tool to measure data.
- -t duration Execute the testsuite for given duration in hours. Default is 24.
- -x TMPDIR Directory where temporary files will be created.
- -b DEVICE Some tests require an unmounted block device
- to run correctly. If DEVICE is not set, a loop device is
- created and used automatically.
- -B LTP_DEV_FS_TYPE The file system of DEVICE.
-
- example: ${0##*/} -d /tmp/sardata -l /tmp/ltplog.$$ -m 128 -t 24 -S
- END
-exit
-}
-
-check_memsize()
-{
- while [ $memsize -gt 1048576 ] #if greater than 1GB
- do
- PROC_NUM=$(( PROC_NUM + 1 ))
- memsize=$(( $memsize - 1048576 ))
- done
- leftover_memsize=$memsize
-}
-
-while getopts d:hi:I:l:STt:m:npqx:b:B:\? arg
-do case $arg in
-
- d) datafile="$OPTARG";;
-
- h) echo "Help info:"
- usage;;
-
- i) interval=$OPTARG;;
-
- I) Iostat=1
- iofile=$OPTARG;;
-
- l) logfile=$OPTARG
- LOGGING=1;;
-
- m) memsize=$(($OPTARG * 1024))
- check_memsize;;
-
- n) NO_NETWORK=1;;
-
- p) PRETTY_PRT=" -p ";;
-
- q) QUIET_MODE=" -q ";;
-
- S) if [ $Top -eq 0 ]; then
- Sar=1
- else
- echo "Cannot specify -S and -T...exiting"
- exit
- fi;;
-
- T) if [ $Sar -eq 0 ]; then
- $LTPROOT/testcases/bin/top -h 2>&1 | grep "\-f filename" >/dev/null
- if [ $? -eq 0 ]; then
- Top=1
- else
- echo "ERROR: Please build and install the version of top in the /tools dir"
- exit
- fi
- else
- echo "Cannot specify -S and -T...exiting"
- exit
- fi;;
-
- t) hours=$OPTARG
- duration=$(($hours * 60 * 60));;
-
- x) export TMPBASE=$(readlink -f ${OPTARG});;
-
- b) export LTP_DEV=${OPTARG};;
-
- B) export LTP_DEV_FS_TYPE=${OPTARG};;
-
- \?) echo "Help info:"
- usage;;
- esac
-done
-
-export TMP="${TMPBASE}/ltpstress-$$"
-export TMPDIR=${TMP}
-mkdir -p ${TMP}
-
-# to write as user nobody into tst_tmpdir()
-chmod 777 $TMP || \
-{
- echo "unable to chmod 777 $TMP ... aborting"
- exit 1
-}
-
-cd $TMP || \
-{
- echo "could not cd ${TMP} ... exiting"
- exit 1
-}
-
-if [ $NO_NETWORK -eq 0 ];then
- # Networking setup
- echo `hostname` >> /root/.rhosts
- chmod 644 /root/.rhosts
-
- netstat -an | grep 514
- if [ $? -eq 1 ];then
- echo "Error: 'rsh' daemon not active on this machine."
- exit 1
- fi
-
- ps -ef | grep portmap | grep -v grep
- if [ $? -eq 1 ];then
- ps -ef | grep rpcbind | grep -v grep
- if [ $? -eq 1 ];then
- echo "Portmap and rpcbind not running"
- echo "Let's start portmap"
- /sbin/portmap &
- sleep 1
- ps -ef | grep portmap | grep -v grep
- if [ $? -eq 1 ];then
- echo "Could not start portmap, Let's start rpcbind"
- /sbin/rpcbind &
- sleep 1
- ps -ef | grep rpcbind | grep -v grep
- if [ $? -eq 1 ];then
- Echo "Error: Could not start rpcbind daemon."
- exit 1
- else
- echo "The RPC test suite is using rpcbind"
- fi
- else
- echo "The RPC test suite is using portmap"
- fi
- else
- echo "The RPC test suite is using rpcbind"
- fi
- else
- echo "The RPC test suite is using portmap"
- fi
-
- ps -e | grep nfsd
- if [ $? -eq 1 ];then
- /usr/sbin/rpc.nfsd
- fi
- sleep 1
- ps -e | grep nfsd
- if [ $? -eq 1 ];then
- echo "Error: Could not start nfs server daemon."
- exit 1
- fi
-
- ps -e | grep rpc.statd
- if [ $? -eq 1 ];then
- /sbin/rpc.statd
- fi
- sleep 1
- ps -e | grep rpc.statd
- if [ $? -eq 1 ];then
- echo "Error: Could not start statd daemon."
- exit 1
- fi
-
- ps -e | grep rpc.mountd
- if [ $? -eq 1 ];then
- /usr/sbin/rpc.mountd
- fi
- sleep 1
- ps -e | grep rpc.mountd
- if [ $? -eq 1 ];then
- echo "Error: Could not start mountd daemon."
- exit 1
- fi
- # End of network setup
-fi
-
-#If -m not set, use all the RAM + 1/2 swapspace
-if [ $memsize -eq 0 ]; then
- TOTALRAM=$(free -m | grep Mem: | awk {'print $2'})
- TOTALSWAP=$(free -m | grep Swap: | awk {'print $2'})
- TESTSWAP=$(($TOTALSWAP / 2))
- if [ $TESTSWAP -eq 0 ]; then
- #if there is no swap in the system, use only the free RAM
- TESTMEM=$(free -m | grep Mem: | awk {'print $4'})
- else
- TESTMEM=$(($TESTSWAP + $TOTALRAM))
- fi
- #Convert to kilobytes
- memsize=$(($TESTMEM * 1024))
- check_memsize
-fi
-
-# Set max processes to unlimited.
-ulimit -u unlimited
-
-if [ $PROC_NUM -gt 0 ];then
- genload --vm $PROC_NUM --vm-bytes 1073741824 >/dev/null 2>&1 &
-fi
-if [ $leftover_memsize -gt 0 ];then
- genload --vm 1 --vm-bytes $(($leftover_memsize * 1024)) >/dev/null 2>&1 &
-fi
-
-sort -R ${LTPROOT}/runtest/stress.part1 -o ${TMP}/stress.part1
-sort -R ${LTPROOT}/runtest/stress.part2 -o ${TMP}/stress.part2
-sort -R ${LTPROOT}/runtest/stress.part3 -o ${TMP}/stress.part3
-
-sleep 2
-
-if [ $Sar -eq 1 ]; then
- sar -o $datafile $interval > /dev/null &
-fi
-
-if [ $Top -eq 1 ]; then
- screen -d -m $LTPROOT/testcases/bin/top -o $datafile -d $interval &
- SCREEN_PID=$(ps -e | grep screen | awk {'print $1'})
-fi
-
-sleep 2
-
-if [ $Iostat -eq 1 ]; then
- while [ 0 = 0 ];do iostat -dt >> $iofile; sleep $interval;done &
- Iostat_PID=$?
-fi
-
-sleep 2
-
-output1=${TMPBASE}/ltpstress.$$.output1
-output2=${TMPBASE}/ltpstress.$$.output2
-output3=${TMPBASE}/ltpstress.$$.output3
-
-${LTPROOT}/bin/ltp-pan -e ${PRETTY_PRT} ${QUIET_MODE} -S -t ${hours}h -a stress1 -n stress1 -l $logfile -f ${TMP}/stress.part1 -o $output1 &
-${LTPROOT}/bin/ltp-pan -e ${PRETTY_PRT} ${QUIET_MODE} -S -t ${hours}h -a stress2 -n stress2 -l $logfile -f ${TMP}/stress.part2 -o $output2 &
-${LTPROOT}/bin/ltp-pan -e ${PRETTY_PRT} ${QUIET_MODE} -S -t ${hours}h -a stress3 -n stress3 -l $logfile -f ${TMP}/stress.part3 -o $output3 &
-
-echo "Running LTP Stress for $hours hour(s) using $(($memsize/1024)) Mb"
-echo ""
-echo "Test output recorded in:"
-echo " $output1"
-echo " $output2"
-echo " $output3"
-
-# Sleep a little longer than duration to let ltp-pan "try" to gracefully end itself.
-sleep $(($duration + 10))
-
-if [ $Sar -eq 1 ]; then
- killall -9 sadc >/dev/null 2>&1
-fi
-if [ $Top -eq 1 ]; then
- kill $SCREEN_PID >/dev/null 2>&1
-fi
-killall -9 ltp-pan >/dev/null 2>&1
-killall -9 genload >/dev/null 2>&1
-if [ $NO_NETWORK -eq 0 ];then
- killall -9 NPtcp >/dev/null 2>&1
-fi
-if [ $Iostat -eq 1 ];then
- kill -9 $Iostat_PID >/dev/null 2>&1
-fi
-rm -rf ${TMP}
-echo "Testing done"
-if [ $LOGGING -eq 1 ];then
- if [ ! -z $PRETTY_PRT ]; then
- grep FAIL $logfile > /dev/null 2>&1
- else
- grep 'stat=' $logfile | grep -v 'stat=0' > /dev/null 2>&1
- fi
-
- if [ $? -eq 1 ]; then
- echo "All Tests PASSED!"
- else
- echo "Testing yielded failures. See logfile: $logfile"
- if [ $NO_NETWORK -eq 1 ];then
- echo "The NFS related tests should fail because network stress was disabled"
- fi
- fi
-fi
-
-
--
2.19.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [LTP] [RFC PATCH 2/2] Remove ltplite and runltplite.sh
2018-10-15 20:18 [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions Petr Vorel
2018-10-15 20:18 ` [LTP] [RFC PATCH 1/2] Remove LTP stress tests Petr Vorel
@ 2018-10-15 20:18 ` Petr Vorel
2018-11-05 11:43 ` [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions Petr Vorel
2 siblings, 0 replies; 9+ messages in thread
From: Petr Vorel @ 2018-10-15 20:18 UTC (permalink / raw)
To: ltp
ltplite was meant to be used as a quick test for install base.
It contains duplicate definitions:
fs, ipc, math, mm, nptl, pty, sched, syscalls
Definitions are outdated anyway. There is no point trying trying
to keep them sync.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
Makefile | 2 +-
runltplite.sh | 392 -----------------
runtest/ltplite | 1113 -----------------------------------------------
3 files changed, 1 insertion(+), 1506 deletions(-)
delete mode 100755 runltplite.sh
delete mode 100644 runtest/ltplite
diff --git a/Makefile b/Makefile
index b0368a472..bcadd21b2 100644
--- a/Makefile
+++ b/Makefile
@@ -163,7 +163,7 @@ clean:: $(CLEAN_TARGETS)
$(foreach tgt,$(MAKE_TARGETS) include-all lib-all $(filter-out clean_install_dir,$(CLEAN_TARGETS)) $(INSTALL_TARGETS) include-install lib-install,$(eval $(call target_to_dir_dep_mapping,$(tgt))))
BINDIR_INSTALL_SCRIPTS := execltp
-SRCDIR_INSTALL_SCRIPTS := IDcheck.sh runltp runltplite.sh ver_linux
+SRCDIR_INSTALL_SCRIPTS := IDcheck.sh runltp ver_linux
SRCDIR_INSTALL_READONLY := Version
SRCDIR_INSTALL_TARGETS := $(SRCDIR_INSTALL_SCRIPTS) $(SRCDIR_INSTALL_READONLY)
diff --git a/runltplite.sh b/runltplite.sh
deleted file mode 100755
index 000e50869..000000000
--- a/runltplite.sh
+++ /dev/null
@@ -1,392 +0,0 @@
-#!/bin/sh
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2001,2005 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
-# File: runltplite
-#
-# Description: This script can be used to run a subset the tests in the LTP test suite
-# This script is typically used as a quick test to check an install base.
-#
-# Authors: Manoj Iyer - manoji@us.ibm.com
-# Robbie Williamson - robbiew@us.ibm.com
-# Marty Ridgeway - mridge@us.ibm.com
-#
-# History: Created runltplite script to run a subset of the LTP testsuite
-#
-#
-#
-#
-#
-#
-#
-#
-
-. "$(dirname $0)/runltp"
-
-setup()
-{
- cd `dirname $0` || \
- {
- echo "FATAL: unable to change directory to $(dirname $0)"
- exit 1
- }
- export LTPROOT=${PWD}
- export TMPBASE="/tmp"
- export TMP="${TMPBASE}/ltp-$$"
- export PATH="${PATH}:${LTPROOT}/testcases/bin:${LTPROOT}/bin"
-
-
- export LTP_DEV=""
- export LTP_DEV_FS_TYPE="ext2"
-
- [ -d $LTPROOT/testcases/bin ] ||
- {
- echo "FATAL: LTP not installed correctly"
- echo "INFO: Follow directions in INSTALL!"
- exit 1
- }
-
- [ -e $LTPROOT/bin/ltp-pan ] ||
- {
- echo "FATAL: Test suite driver 'ltp-pan' not found"
- echo "INFO: Follow directions in INSTALL!"
- exit 1
- }
-}
-
-
-usage()
-{
- cat <<-EOF >&2
-
- usage: ${0##*/} -c [-d TMPDIR] [-i # (in Mb)]
- [ -l LOGFILE ] [ -o OUTPUTFILE ] [ -m # (in Mb)] -N -q
- [ -r LTPROOT ] -v
-
- -c NUM_PROCS Run LTP under additional background CPU load.
- -d TMPDIR Directory where temporary files will be created.
- -h Help. Prints all available options.
- -i # (in Mb) Run LTP with a _min_ IO load of # Mb in background.
- -l LOGFILE Log results of test in a logfile.
- -m # (in Mb) Run LTP with a _min_ memory load of # Mb in background.
- -N Run all the networking tests.
- -o OUTPUTFILE Redirect test output to a file.
- -p Human readable format logfiles.
- -q Print less verbose output to screen.
- -r LTPROOT Fully qualified path where testsuite is installed.
- -S SKIPFILE Skip tests specified in SKIPFILE.
- -b DEVICE Some tests require an unmounted block device to run
- correctly.
- -B LTP_DEV_FS_TYPE The file system of test block devices.
-
- example: ${0##*/} -i 1024 -m 128 -p -q -l /tmp/resultlog.$$ -d ${PWD}
-
-
- EOF
-exit 0
-}
-
-
-main()
-{
- local CMDFILE="ltplite"
- local PRETTY_PRT=""
- local ALT_DIR=0
- local RUN_NETEST=0
- local QUIET_MODE=""
- local VERBOSE_MODE=""
- local NETPIPE=0
- local GENLOAD=0
- local MEMSIZE=0
- local DURATION=""
- local BYTESIZE=0
- local LOGFILE=""
- local PRETTY_PRT=""
- local TAG_RESTRICT_STRING=""
- local PAN_COMMAND=""
-
- local scenfile=""
-
- while getopts c:d:hi:l:m:No:pqr:S:b:B: arg
- do case $arg in
- c)
- NUM_PROCS=$(($OPTARG))
- $LTPROOT/testcases/bin/genload --cpu $NUM_PROCS >/dev/null 2>&1 &
- GENLOAD=1 ;;
-
- d) # append $$ to TMP, as it is recursively
- # removed at end of script.
- TMPBASE=$OPTARG
- TMP="${TMPBASE}/ltp-$$"
- export TMPDIR="$TMP";;
-
- h) usage;;
-
- i)
- BYTESIZE=$(($OPTARG * 1024 * 1024))
- $LTPROOT/testcases/bin/genload --io 1 >/dev/null 2>&1 &
- $LTPROOT/testcases/bin/genload --hdd 0 --hdd-bytes $BYTESIZE \
- >/dev/null 2>&1 &
- GENLOAD=1 ;;
-
- l)
-
- [ ! -d $LTPROOT/results ] && \
- {
- echo "INFO: creating $LTPROOT/results directory"
- mkdir -p $LTPROOT/results || \
- {
- echo "ERROR: failed to create $LTPROOT/results"
- exit 1
- }
- }
- case $OPTARG in
- /*)
- LOGFILE="-l $OPTARG" ;;
- *)
- LOGFILE="-l $LTPROOT/results/$OPTARG"
- ALT_DIR=1 ;;
- esac ;;
-
- m)
- MEMSIZE=$(($OPTARG * 1024 * 1024))
- $LTPROOT/testcases/bin/genload --vm 0 --vm-bytes $MEMSIZE \
- >/dev/null 2>&1 &
- GENLOAD=1;;
-
- N) RUN_NETEST=1;;
-
- o) OUTPUTFILE="-o $OPTARG" ;;
-
- p) PRETTY_PRT=" -p ";;
-
- q) QUIET_MODE=" -q ";;
-
- r) LTPROOT=$OPTARG;;
-
- S) case $OPTARG in
- /*)
- SKIPFILE=$OPTARG;;
- *)
- SKIPFILE="$LTPROOT/$OPTARG";;
- esac ;;
-
- b) DEVICE=$OPTARG;;
-
- B) LTP_DEV_FS_TYPE=$OPTARG;;
-
-
- \?) usage;;
- esac
- done
-
-
- mkdir -p $TMP || \
- {
- echo "FATAL: Unable to make temporary directory $TMP"
- exit 1
- }
-
- cd $TMP || \
- {
- echo "could not cd ${TMP} ... exiting"
- exit 1
- }
-
-# Run Networking tests ?
-
- [ "$RUN_NETEST" -eq 1 ] && \
- {
- [ -z "$RHOST" ] || [ -z "$PASSWD" ] && \
- {
- [ -z "$RHOST" ] && \
- {
- echo \
- "INFO: Enter RHOST = 'name of the remote host machine'"
- echo -n "-> "
- read RHOST
- }
-
- [ -z "$PASSWD" ] && \
- {
- echo " "
- echo \
- "INFO: Enter PASSWD = 'root passwd of the remote host machine'"
- echo -n "-> "
- read PASSWD
- }
- export RHOST=$RHOST
- export PASSWD=$PASSWD
- echo "WARNING: security of $RHOST may be compromised"
- }
- }
-
- # If user does not provide a command file select a default set of testcases
- # to execute.
- if [ -f $CMDFILE ] || \
- CMDFILE="$LTPROOT/runtest/$CMDFILE"
- then
- cat $CMDFILE > ${TMP}/alltests || \
- {
- echo "FATAL: Unable to create command file"
- exit 1
- }
- fi
-
- if [ "$RUN_NETEST" -eq 1 ]; then
- SCENARIO_LISTS="$SCENARIO_LISTS $LTPROOT/scenario_groups/network"
- fi
-
- # DO NOT INDENT/DEDENT!
- if [ -n "$SCENARIO_LISTS" ]; then
- # Insurance to make sure that the first element in the pipe
- # completed successfully.
- cat_ok_sentinel=$TMP/cat_ok.$$
- (cat $SCENARIO_LISTS && touch "$cat_ok_sentinel") | \
- while read scenfile; do
-
- scenfile=${LTPROOT}/runtest/$scenfile
-
- # Skip over non-existent scenario files; things are
- # robust enough now that the build will fail if these
- # files don't exist.
- [ -f "$scenfile" ] || continue
-
- cat $scenfile >> "$TMP/alltests" || {
- echo "FATAL: unable to append to command file"
- rm -Rf "$TMP"
- rm -f "$cat_ok_sentinel"
- exit 1
- }
-
- done
-
- rm -f "$cat_ok_sentinel"
-
- fi
- # ^^DO NOT INDENT/DEDENT!^^
-
- # The fsx-linux tests use the SCRATCHDEV environment variable as a location
- # that can be reformatted and run on. Set SCRATCHDEV if you want to run
- # these tests. As a safeguard, this is disabled.
- unset SCRATCHDEV
- [ -n "$SCRATCHDEV" ] && \
- {
- cat ${LTPROOT}/runtest/fsx >> ${TMP}/alltests ||
- {
- echo "FATAL: unable to create fsx-linux tests command file"
- exit 1
- }
- }
-
- # check for required users and groups
- ${LTPROOT}/IDcheck.sh >/dev/null 2>&1 || \
- {
- echo "WARNING: required users and groups not present"
- echo "WARNING: some test cases may fail"
- }
-
- [ -n "$CMDFILES" ] && \
- {
- for scenfile in `echo "$CMDFILES" | tr ',' ' '`
- do
- [ -f "$scenfile" ] || scenfile="$LTPROOT/runtest/$scenfile"
- cat "$scenfile" >> ${TMP}/alltests || \
- {
- echo "FATAL: unable to create command file"
- rm -Rf "$TMP"
- exit 1
- }
- done
- }
-
- # Blacklist or skip tests if a SKIPFILE was specified with -S
- if [ -n "${SKIPFILE}" ]; then
- for test_name in $(awk '{print $1}' "${SKIPFILE}"); do
- case "${test_name}" in \#*) continue;; esac
- sed -i "/\<${test_name}\>/c\\${test_name} exit 32;" alltests
- done
- fi
-
- # display versions of installed software
- [ -z "$QUIET_MODE" ] && \
- {
- ${LTPROOT}/ver_linux || \
- {
- echo "WARNING: unable to display versions of software installed"
- exit 1
- }
- }
-
- set_block_device
-
- [ ! -z "$QUIET_MODE" ] && { echo "INFO: Test start time: $(date)" ; }
- PAN_COMMAND="${LTPROOT}/bin/ltp-pan $QUIET_MODE -e -S $INSTANCES $DURATION -a $$ \
- -n $$ $PRETTY_PRT -f ${TMP}/alltests $LOGFILE $OUTPUTFILE"
- if [ ! -z "$VERBOSE_MODE" ] ; then
- echo "COMMAND: $PAN_COMMAND"
- if [ ! -z "$TAG_RESTRICT_STRING" ] ; then
- echo "INFO: Restricted to $TAG_RESTRICT_STRING"
- fi
- fi
- #$PAN_COMMAND #Duplicated code here, because otherwise if we fail, only "PAN_COMMAND" gets output
- # Some tests need to run inside the "bin" directory.
- cd "${LTPROOT}/testcases/bin"
- ${LTPROOT}/bin/ltp-pan $QUIET_MODE -e -S $INSTANCES $DURATION -a $$ \
- -n $$ $PRETTY_PRT -f ${TMP}/alltests $LOGFILE $OUTPUTFILE
-
- if [ $? -eq 0 ]; then
- echo "INFO: ltp-pan reported all tests PASS"
- VALUE=0
- else
- echo "INFO: ltp-pan reported some tests FAIL"
- VALUE=1
- fi
- cd ..
- [ ! -z "$QUIET_MODE" ] && { echo "INFO: Test end time: $(date)" ; }
-
- [ "$GENLOAD" -eq 1 ] && { killall -9 genload ; }
- [ "$NETPIPE" -eq 1 ] && { killall -9 NPtcp ; }
-
- [ "$ALT_DIR" -eq 1 ] && \
- {
- cat <<-EOF >&1
-
- ###############################################################"
-
- Done executing testcases."
- result log is in the $LTPROOT/results directory"
-
- ###############################################################"
-
- EOF
- }
- exit $VALUE
-}
-
-cleanup()
-{
- rm -rf ${TMP}
-}
-
-trap "cleanup" 0
-setup
-main "$@"
-
-#vim: syntax=sh
diff --git a/runtest/ltplite b/runtest/ltplite
deleted file mode 100644
index 9b2696910..000000000
--- a/runtest/ltplite
+++ /dev/null
@@ -1,1113 +0,0 @@
-#DESCRIPTION:Math library tests - CPU tests
-abs01 abs01
-
-atof01 atof01
-
-float_bessel cd $LTPROOT/testcases/bin; float_bessel -v
-float_exp_log cd $LTPROOT/testcases/bin; float_exp_log -v
-float_iperb cd $LTPROOT/testcases/bin; float_iperb -v
-float_power cd $LTPROOT/testcases/bin; float_power -v
-float_trigo cd $LTPROOT/testcases/bin; float_trigo -v
-
-fptest01 fptest01
-fptest02 fptest02
-
-nextafter01 nextafter01
-
-#DESCRIPTION:fsx filesystem stress tests
-fsx-linux export TCbin=$LTPROOT/testcases/bin;fsxtest02 10000
-#fsx-ext2 fsxtest $SCRATCHDEV ext2 10000
-#fsx-ext3 fsxtest $SCRATCHDEV ext3 10000
-#fsx-jfs fsxtest $SCRATCHDEV jfs 10000
-#fsx-xfs fsxtest $SCRATCHDEV xfs 10000
-#fsx-reiserfs fsxtest $SCRATCHDEV reiserfs 10000
-
-#DESCRIPTION:Interprocess communication stress
-# These tests use tests/pipeio to put pipes (named or unnamed) through a workout
-#
-pipeio_1 pipeio -T pipeio_1 -c 5 -s 4090 -i 100 -b -f x80
-# spawns 5 children to write 100 chunks of 4090 bytes to a named pipe
-# using blocking I/O
-#pipeio_2 pipeio -T pipeio_2 -c 5 -s 4090 -i 100 -f x80
-# spawns 5 children to write 100 chunks of 4090 bytes to a named pipe
-# using non-blocking I/O
-# This test hits EAGAIN, which pipeio doesn't handle at the moment
-pipeio_3 pipeio -T pipeio_3 -c 5 -s 4090 -i 100 -u -b -f x80
-# spawns 5 children to write 100 chunks of 4090 bytes to an unnamed pipe
-# using blocking I/O
-pipeio_4 pipeio -T pipeio_4 -c 5 -s 4090 -i 100 -u -f x80
-# spawns 5 children to write 100 chunks of 4090 bytes to an unnamed pipe
-# using non-blocking I/O
-pipeio_5 pipeio -T pipeio_5 -c 5 -s 5000 -i 10 -b -f x80
-# spawns 5 children to write 10 chunks of 5000 bytes to a named pipe
-# using blocking I/O
-pipeio_6 pipeio -T pipeio_6 -c 5 -s 5000 -i 10 -b -u -f x80
-# spawns 5 children to write 10 chunks of 5000 bytes to an unnamed pipe
-# using blocking I/O
-#pipeio_7 pipeio -T pipeio_7 -c 5 -s 5000 -i 10 -f x80
-# spawns 5 children to write 10 chunks of 5000 bytes to a named pipe
-# using non-blocking I/O
-# This test hits EAGAIN, which pipeio doesn't handle at the moment
-pipeio_8 pipeio -T pipeio_8 -c 5 -s 5000 -i 10 -u -f x80
-# spawns 5 children to write 10 chunks of 5000 bytes to an unnamed pipe
-# using non-blocking I/O
-
-sem01 sem01
-sem02 sem02
-
-
-#DESCRIPTION:Kernel system calls
-abort01 abort01
-
-accept01 accept01
-
-access01 access01
-access02 access02
-access03 access03
-access04 access04
-
-acct01 acct01
-
-adjtimex01 adjtimex01
-adjtimex02 adjtimex02
-
-alarm02 alarm02
-alarm03 alarm03
-alarm05 alarm05
-alarm06 alarm06
-alarm07 alarm07
-
-asyncio02 asyncio02
-
-bind01 bind01
-bind02 bind02
-
-brk01 brk01
-
-capget01 capget01
-capget02 capget02
-
-capset01 capset01
-capset02 capset02
-
-chdir01 chdir01
-chdir01A symlink01 -T chdir01
-chdir02 chdir02
-chdir03 chdir03
-chdir04 chdir04
-
-chmod01 chmod01
-chmod01A symlink01 -T chmod01
-chmod02 chmod02
-chmod03 chmod03
-chmod04 chmod04
-chmod05 chmod05
-chmod06 chmod06
-chmod07 chmod07
-
-chown01 chown01
-chown02 chown02
-chown03 chown03
-chown04 chown04
-chown05 chown05
-
-chroot01 chroot01
-chroot02 chroot02
-chroot03 chroot03
-chroot04 chroot04
-
-
-clone01 clone01
-clone02 clone02
-clone03 clone03
-clone04 clone04
-clone05 clone05
-clone06 clone06
-clone07 clone07
-clone08 clone08
-
-close01 close01
-close02 close02
-close08 close08
-
-confstr01 confstr01
-
-connect01 connect01
-
-creat01 creat01
-creat03 creat03
-creat04 creat04
-creat05 creat05
-creat06 creat06
-creat07 creat07
-creat08 creat08
-
-dup01 dup01
-dup02 dup02
-dup03 dup03
-dup04 dup04
-dup05 dup05
-dup06 dup06
-dup07 dup07
-
-dup201 dup201
-dup202 dup202
-dup203 dup203
-dup204 dup204
-dup205 dup205
-
-epoll_ctl01 epoll_ctl01
-epoll_ctl02 epoll_ctl02
-
-epoll_wait01 epoll_wait01
-epoll_wait02 epoll_wait02
-epoll_wait03 epoll_wait03
-
-epoll_pwait01 epoll_pwait01
-
-execl01 execl01
-execle01 execle01
-execlp01 execlp01
-
-execv01 execv01
-execve01 execve01
-execve02 execve02
-execve03 execve03
-execve04 execve04
-execve05 execve05 -i 5 -n 32
-execvp01 execvp01
-
-exit01 exit01
-exit02 exit02
-
-fchdir01 fchdir01
-fchdir02 fchdir02
-fchdir03 fchdir03
-
-fchmod01 fchmod01
-fchmod02 fchmod02
-fchmod03 fchmod03
-fchmod04 fchmod04
-fchmod05 fchmod05
-fchmod06 fchmod06
-
-fchown01 fchown01
-fchown02 fchown02
-fchown03 fchown03
-fchown04 fchown04
-fchown05 fchown05
-
-fcntl01 fcntl01
-fcntl02 fcntl02
-fcntl03 fcntl03
-fcntl04 fcntl04
-fcntl05 fcntl05
-fcntl06 fcntl06
-fcntl07 fcntl07
-fcntl08 fcntl08
-fcntl09 fcntl09
-fcntl10 fcntl10
-fcntl11 fcntl11
-fcntl12 fcntl12
-fcntl13 fcntl13
-fcntl14 fcntl14
-fcntl15 fcntl15
-#fcntl16 fcntl16 #Contains errors.
-fcntl17 fcntl17
-fcntl18 fcntl18
-fcntl19 fcntl19
-fcntl20 fcntl20
-fcntl21 fcntl21
-fcntl22 fcntl22
-fcntl23 fcntl23
-fcntl24 fcntl24
-fcntl25 fcntl25
-fcntl26 fcntl26
-# The tests for these system calls fcntl27 and fcntl28 are temporarily being disabled
-# fcntl27 fcntl27
-# fcntl28 fcntl28
-fcntl29 fcntl29
-fcntl30 fcntl30
-fcntl31 fcntl31
-fcntl32 fcntl32
-fcntl33 fcntl33
-
-fdatasync01 fdatasync01
-fdatasync02 fdatasync02
-
-flock01 flock01
-flock02 flock02
-flock03 flock03
-flock04 flock04
-flock06 flock06
-
-fmtmsg01 fmtmsg01
-
-fork01 fork01
-fork02 fork02
-fork03 fork03
-fork04 fork04
-fork05 fork05
-fork06 fork06
-fork07 fork07
-fork08 fork08
-fork09 fork09
-fork10 fork10
-fork11 fork11
-
-fpathconf01 fpathconf01
-
-fstat01 fstat01
-fstat02 fstat02
-fstat03 fstat03
-fstat05 fstat05
-
-fstatfs01 fstatfs01
-fstatfs02 fstatfs02
-
-fsync01 fsync01
-fsync02 fsync02
-fsync03 fsync03
-
-ftruncate01 ftruncate01
-ftruncate02 ftruncate02
-ftruncate03 ftruncate03
-ftruncate04 ftruncate04
-
-getcontext01 getcontext01
-
-getcwd01 getcwd01
-getcwd02 getcwd02
-getcwd03 getcwd03
-getcwd04 getcwd04
-getcwd05 getcwd05
-
-getdents01 getdents01
-getdents02 getdents02
-
-getdomainname01 getdomainname01
-
-getdtablesize01 getdtablesize01
-
-getegid01 getegid01
-
-geteuid01 geteuid01
-geteuid02 geteuid02
-
-getgid01 getgid01
-getgid03 getgid03
-
-getgroups01 getgroups01
-getgroups03 getgroups03
-
-gethostid01 gethostid01
-
-gethostname01 gethostname01
-
-getitimer01 getitimer01
-getitimer02 getitimer02
-getitimer03 getitimer03
-
-getpeername01 getpeername01
-
-getpgid01 getpgid01
-getpgid02 getpgid02
-
-getpgrp01 getpgrp01
-
-getpid01 getpid01
-getpid02 getpid02
-
-getppid01 getppid01
-getppid02 getppid02
-
-getpriority01 getpriority01
-getpriority02 getpriority02
-
-getresgid01 getresgid01
-getresgid02 getresgid02
-getresgid03 getresgid03
-
-getresuid01 getresuid01
-getresuid02 getresuid02
-getresuid03 getresuid03
-
-getrlimit01 getrlimit01
-getrlimit02 getrlimit02
-
-getrusage01 getrusage01
-getrusage02 getrusage02
-
-getsid01 getsid01
-getsid02 getsid02
-
-getsockname01 getsockname01
-
-getsockopt01 getsockopt01
-
-gettimeofday01 gettimeofday01
-gettimeofday02 gettimeofday02
-
-getuid01 getuid01
-getuid03 getuid03
-
-#Needs tty device.
-#ioctl01 ioctl01 -D /dev/tty0
-#ioctl02 ioctl02 -D /dev/tty0
-
-# Introducing ioctl tests for all /dev/tty* devices
-ioctl test_ioctl
-
-ioperm01 ioperm01
-ioperm02 ioperm02
-
-iopl01 iopl01
-iopl02 iopl02
-
-kill01 kill01
-kill02 kill02
-kill03 kill03
-kill04 kill04
-kill05 kill05
-kill06 kill06
-kill07 kill07
-kill08 kill08
-kill09 kill09
-kill10 kill10
-kill11 kill11
-kill12 kill12
-
-lchown01 lchown01
-lchown02 lchown02
-lchown03 lchown03
-
-lgetxattr01 lgetxattr01
-lgetxattr02 lgetxattr02
-
-link01 symlink01 -T link01
-link02 link02
-link03 link03
-link04 link04
-link05 link05
-link06 link06
-link07 link07
-link08 link08
-
-listen01 listen01
-
-llistxattr01 llistxattr01
-llistxattr02 llistxattr02
-llistxattr03 llistxattr03
-
-llseek01 llseek01
-llseek02 llseek02
-llseek03 llseek03
-
-lseek01 lseek01
-lseek02 lseek02
-lseek07 lseek07
-lseek11 lseek11
-
-lstat01A symlink01 -T lstat01
-lstat01 lstat01
-lstat02 lstat02
-lstat03 lstat03
-
-mallopt01 mallopt01
-
-memset01 memset01
-memcmp01 memcmp01
-memcpy01 memcpy01
-
-mlockall01 mlockall01
-mlockall02 mlockall02
-mlockall03 mlockall03
-
-mkdir02 mkdir02
-mkdir03 mkdir03
-mkdir04 mkdir04
-mkdir05 mkdir05
-mkdir05A symlink01 -T mkdir05
-mkdir09 mkdir09
-
-mknod01 mknod01
-mknod02 mknod02
-mknod03 mknod03
-mknod04 mknod04
-mknod05 mknod05
-mknod06 mknod06
-mknod07 mknod07
-mknod08 mknod08
-mknod09 mknod09
-
-mlock01 mlock01
-mlock02 mlock02
-
-mlock201 mlock201
-mlock202 mlock202
-mlock203 mlock203
-
-qmm01 mmap001 -m 1
-mmap01 mmap01
-mmap02 mmap02
-mmap03 mmap03
-mmap04 mmap04
-mmap05 mmap05
-mmap06 mmap06
-mmap07 mmap07
-mmap08 mmap08
-mmap09 mmap09
-mmap16 mmap16
-
-modify_ldt01 modify_ldt01
-modify_ldt02 modify_ldt02
-modify_ldt03 modify_ldt03
-
-#
-# These tests require an unmounted block device
-# to run correctly. Please see individual test
-# code for more information.
-#
-#mount01 mount01 -D /dev/...
-#mount02 mount02 -D /dev/...
-#mount03 mount03 -D /dev/...
-#mount04 mount04 -D /dev/...
-
-mprotect01 mprotect01
-mprotect02 mprotect02
-mprotect03 mprotect03
-mprotect04 mprotect04
-
-mremap01 mremap01
-mremap02 mremap02
-mremap03 mremap03
-mremap04 mremap04
-
-msgctl01 msgctl01
-msgctl02 msgctl02
-msgctl03 msgctl03
-msgctl04 msgctl04
-
-msgget01 msgget01
-msgget02 msgget02
-msgget03 msgget03
-
-msgrcv01 msgrcv01
-msgrcv02 msgrcv02
-msgrcv03 msgrcv03
-msgrcv04 msgrcv04
-msgrcv05 msgrcv05
-msgrcv06 msgrcv06
-msgrcv07 msgrcv07
-msgrcv08 msgrcv08
-
-msgsnd01 msgsnd01
-msgsnd02 msgsnd02
-msgsnd05 msgsnd05
-msgsnd06 msgsnd06
-
-msync01 msync01
-msync02 msync02
-msync03 msync03
-
-munlock01 munlock01
-munlock02 munlock02
-
-munlockall01 munlockall01
-
-munmap01 munmap01
-munmap02 munmap02
-munmap03 munmap03
-
-nanosleep01 nanosleep01
-nanosleep02 nanosleep02
-nanosleep03 nanosleep03
-nanosleep04 nanosleep04
-
-nftw01 nftw01
-nftw6401 nftw6401
-
-nice01 nice01
-nice02 nice02
-nice03 nice03
-nice04 nice04
-
-open01 open01
-open01A symlink01 -T open01
-open02 open02
-open03 open03
-open04 open04
-open05 open05
-open06 open06
-open07 open07
-open08 open08
-open09 open09
-open10 open10
-open11 open11
-open12 open12
-open13 open13
-
-mincore01 mincore01
-#mincore02 mincore02 currently hangs and does not exit correctly
-madvise01 madvise01
-madvise02 madvise02
-
-pathconf01 pathconf01
-
-pause01 pause01
-pause02 pause02
-pause03 pause03
-
-personality01 personality01
-
-pipe01 pipe01
-pipe02 pipe02
-pipe03 pipe03
-pipe04 pipe04
-pipe05 pipe05
-pipe06 pipe06
-pipe07 pipe07
-pipe08 pipe08
-pipe09 pipe09
-pipe10 pipe10
-pipe11 pipe11
-
-poll01 poll01
-
-prctl01 prctl01
-prctl02 prctl02
-prctl03 prctl03
-
-pread01 pread01
-pread02 pread02
-pread03 pread03
-
-preadv01 preadv01
-preadv02 preadv02
-preadv03 preadv03
-
-preadv201 preadv201
-preadv202 preadv202
-
-profil01 profil01
-
-pselect01 pselect01
-pselect02 pselect02
-pselect03 pselect03
-
-ptrace01 ptrace01
-ptrace02 ptrace02
-ptrace03 ptrace03
-ptrace05 ptrace05
-
-pwrite01 pwrite01
-pwrite02 pwrite02
-pwrite04 pwrite04
-
-pwrite01_64 pwrite01_64
-pwrite02_64 pwrite02_64
-pwrite04_64 pwrite04_64
-
-pwritev01 pwritev01
-pwritev02 pwritev02
-pwritev03 pwritev03
-
-read01 read01
-read02 read02
-read03 read03
-read04 read04
-
-readdir01 readdir01
-readdir02 readdir02
-readdir21 readdir21
-
-readlink01A symlink01 -T readlink01
-readlink01 readlink01
-readlink03 readlink03
-
-readv01 readv01
-readv02 readv02
-readv03 readv03
-
-reboot01 reboot01
-reboot02 reboot02
-
-recv01 recv01
-
-recvfrom01 recvfrom01
-
-recvmsg01 recvmsg01
-
-removexattr01 removexattr01
-removexattr02 removexattr02
-
-rename01 rename01
-rename01A symlink01 -T rename01
-rename02 rename02
-rename03 rename03
-rename04 rename04
-rename05 rename05
-rename06 rename06
-rename07 rename07
-rename08 rename08
-rename09 rename09
-rename10 rename10
-rename11 rename11
-rename12 rename12
-rename13 rename13
-rename14 rename14
-
-request_key01 request_key01
-request_key02 request_key02
-
-rmdir01 rmdir01
-rmdir02 rmdir02
-rmdir03 rmdir03
-rmdir03A symlink01 -T rmdir03
-
-sbrk01 sbrk01
-sbrk02 sbrk02
-sbrk03 sbrk03
-
-sched_get_priority_max01 sched_get_priority_max01
-sched_get_priority_max02 sched_get_priority_max02
-
-sched_get_priority_min01 sched_get_priority_min01
-sched_get_priority_min02 sched_get_priority_min02
-
-sched_getparam01 sched_getparam01
-sched_getparam02 sched_getparam02
-sched_getparam03 sched_getparam03
-
-sched_rr_get_interval01 sched_rr_get_interval01
-sched_rr_get_interval02 sched_rr_get_interval02
-sched_rr_get_interval03 sched_rr_get_interval03
-
-sched_setparam01 sched_setparam01
-sched_setparam02 sched_setparam02
-sched_setparam03 sched_setparam03
-sched_setparam04 sched_setparam04
-sched_setparam05 sched_setparam05
-
-sched_getscheduler01 sched_getscheduler01
-sched_getscheduler02 sched_getscheduler02
-
-sched_setscheduler01 sched_setscheduler01
-sched_setscheduler02 sched_setscheduler02
-sched_setscheduler03 sched_setscheduler03
-
-sched_yield01 sched_yield01
-
-select01 select01
-select02 select02
-select03 select03
-select04 select04
-
-semctl01 semctl01
-semctl02 semctl02
-semctl03 semctl03
-semctl04 semctl04
-semctl05 semctl05
-semctl06 semctl06
-semctl07 semctl07
-
-semget01 semget01
-semget02 semget02
-semget03 semget03
-semget05 semget05
-semget06 semget06
-
-semop01 semop01
-semop02 semop02
-semop03 semop03
-semop04 semop04
-semop05 semop05
-
-send01 send01
-
-sendfile02 sendfile02
-sendfile03 sendfile03
-
-sendmsg01 sendmsg01
-
-sendto01 sendto01
-
-setdomainname01 setdomainname01
-setdomainname02 setdomainname02
-setdomainname03 setdomainname03
-
-setfsgid01 setfsgid01
-setfsgid02 setfsgid02
-setfsgid03 setfsgid03
-
-setfsuid01 setfsuid01
-setfsuid02 setfsuid02
-setfsuid03 setfsuid03
-setfsuid04 setfsuid04
-
-setgid01 setgid01
-setgid02 setgid02
-setgid03 setgid03
-
-setegid01 setegid01
-setegid02 setegid02
-
-setgroups01 setgroups01
-setgroups02 setgroups02
-setgroups03 setgroups03
-setgroups04 setgroups04
-
-sethostname01 sethostname01
-sethostname02 sethostname02
-sethostname03 sethostname03
-
-setitimer01 setitimer01
-setitimer02 setitimer02
-setitimer03 setitimer03
-
-setpgid01 setpgid01
-setpgid02 setpgid02
-setpgid03 setpgid03
-
-setpgrp01 setpgrp01
-setpgrp02 setpgrp02
-
-setpriority01 setpriority01
-setpriority02 setpriority02
-
-setregid01 setregid01
-setregid02 setregid02
-setregid03 setregid03
-setregid04 setregid04
-
-setresgid01 setresgid01
-setresgid02 setresgid02
-setresgid03 setresgid03
-setresgid04 setresgid04
-
-setresuid01 setresuid01
-setresuid02 setresuid02
-setresuid03 setresuid03
-setresuid04 setresuid04
-setresuid05 setresuid05
-
-setreuid01 setreuid01
-setreuid02 setreuid02
-setreuid03 setreuid03
-setreuid04 setreuid04
-setreuid05 setreuid05
-setreuid06 setreuid06
-setreuid07 setreuid07
-
-setrlimit01 setrlimit01
-setrlimit02 setrlimit02
-setrlimit03 setrlimit03
-
-setsid01 setsid01
-
-setsockopt01 setsockopt01
-
-settimeofday01 settimeofday01
-settimeofday02 settimeofday02
-
-setuid01 setuid01
-setuid03 setuid03
-setuid04 setuid04
-
-shmat01 shmat01
-shmat02 shmat02
-
-shmctl01 shmctl01
-shmctl02 shmctl02
-shmctl03 shmctl03
-shmctl04 shmctl04
-
-shmdt01 shmdt01
-shmdt02 shmdt02
-
-shmget01 shmget01
-shmget02 shmget02
-shmget03 shmget03
-shmget04 shmget04
-shmget05 shmget05
-
-sigaction01 sigaction01
-sigaction02 sigaction02
-
-sigaltstack01 sigaltstack01
-sigaltstack02 sigaltstack02
-
-
-sighold02 sighold02
-
-signal01 signal01
-signal02 signal02
-signal03 signal03
-signal04 signal04
-signal05 signal05
-signal06 signal06
-
-sigpending02 sigpending02
-
-sigprocmask01 sigprocmask01
-
-sigrelse01 sigrelse01
-
-sigsuspend01 sigsuspend01
-
-
-socket01 socket01
-
-socketcall01 socketcall01
-socketcall02 socketcall02
-socketcall03 socketcall03
-socketcall04 socketcall04
-
-socketpair01 socketpair01
-
-sockioctl01 sockioctl01
-
-stat01 stat01
-stat02 stat02
-stat03 stat03
-stat04 symlink01 -T stat04
-stat05 stat05
-stat06 stat06
-
-statfs01 statfs01
-statfs02 statfs02
-statfs03 statfs03
-
-statvfs01 statvfs01
-statvfs02 statvfs02
-
-# This syscall is obsoleted by settimeofday.
-#stime01 stime01
-#stime02 stime02
-
-string01 string01
-
-swapoff01 swapoff01
-swapoff02 swapoff02
-
-swapon01 swapon01
-swapon02 swapon02
-swapon03 swapon03
-
-symlink01 symlink01
-symlink02 symlink02
-symlink03 symlink03
-symlink04 symlink04
-symlink05 symlink05
-
-sync01 sync01
-sync02 sync02
-
-syscall01 syscall01
-
-sysconf01 sysconf01
-
-sysctl01 sysctl01
-sysctl03 sysctl03
-sysctl04 sysctl04
-
-sysfs01 sysfs01
-sysfs02 sysfs02
-sysfs03 sysfs03
-sysfs04 sysfs04
-sysfs05 sysfs05
-sysfs06 sysfs06
-
-sysinfo01 sysinfo01
-sysinfo02 sysinfo02
-
-syslog01 syslog01
-syslog02 syslog02
-syslog03 syslog03
-syslog04 syslog04
-syslog05 syslog05
-syslog06 syslog06
-syslog07 syslog07
-syslog08 syslog08
-syslog09 syslog09
-syslog10 syslog10
-syslog11 syslog11
-syslog12 syslog12
-
-# This syscall is obsoleted by gettimeofday.
-# time01 time01
-# time02 time02
-
-times01 times01
-times03 times03
-
-truncate01 truncate01
-truncate02 truncate02
-truncate03 truncate03
-
-# This syscall is obsolete. The latest glibc does not even
-# include the ulimit.h file anymore. The test will fail
-# because the error handling has been simplified.
-#
-# ulimit01 ulimit01
-
-umask01 umask01
-
-uname01 uname01
-uname02 uname02
-uname03 uname03
-
-unlink01 symlink01 -T unlink01
-unlink05 unlink05
-unlink07 unlink07
-unlink08 unlink08
-
-#
-# These tests require an unmounted block device
-# to run correctly. Please see individual test
-# code for more information.
-#
-#umount01 umount01 -D /dev/...
-#umount02 umount02 -D /dev/...
-#umount03 umount03 -D /dev/...
-
-umount2_01 umount2_01
-umount2_02 umount2_02
-umount2_03 umount2_03
-
-ustat01 ustat01
-ustat02 ustat02
-
-utime01 utime01
-utime01A symlink01 -T utime01
-utime02 utime02
-utime03 utime03
-utime04 utime04
-utime05 utime05
-utime06 utime06
-
-vfork01 vfork01
-vfork02 vfork02
-
-vhangup01 vhangup01
-vhangup02 vhangup02
-
-wait01 wait01
-wait02 wait02
-
-wait401 wait401
-wait402 wait402
-
-waitpid01 waitpid01
-waitpid02 waitpid02
-waitpid03 waitpid03
-waitpid04 waitpid04
-waitpid05 waitpid05
-waitpid06 waitpid06
-waitpid07 waitpid07
-waitpid08 waitpid08
-waitpid09 waitpid09
-waitpid10 waitpid10
-waitpid11 waitpid11
-waitpid12 waitpid12
-waitpid13 waitpid13
-
-write01 write01
-write03 write03
-write04 write04
-write05 write05
-
-writev01 writev01
-writev02 writev02
-writev05 writev05
-writev06 writev06
-writev07 writev07
-
-#DESCRIPTION:Memory Mgmt tests
-mm01 mmap001 -m 10000
-# 40 Mb mmap() test.
-# Creates a 10000 page mmap, touches all of the map, sync's it, and
-# munmap()s it.
-mm02 mmap001
-# simple mmap() test.
-#mm03 mmap001 -i 0 -I 1 -m 100
-# repetitive mmapping test.
-# Creates a one page map repetitively for one minute.
-
-mtest01 mtest01 -p80
-mtest01w mtest01 -p80 -w
-
-#test for race conditions
-mtest05 mmstress
-mtest06 mmap1 -x 0.05
-
-mem01 mem01
-mem02 mem02
-
-page01 page01
-page02 page02
-
-data_space data_space
-stack_space stack_space
-
-shmt02 shmt02
-shmt03 shmt03
-shmt04 shmt04
-shmt05 shmt05
-shmt06 shmt06
-shmt07 shmt07
-shmt08 shmt08
-shmt09 shmt09
-shmt10 shmt10
-
-#DESCRIPTION:Scheduler Stress Tests
-pth_str01 pth_str01
-pth_str02 pth_str02 -n1000
-pth_str03 pth_str03
-
-#DESCRIPTION:Native POSIX Thread Library (NPTL) Tests
-nptl01 nptl01
-
-#DESCRIPTION:Terminal type stress
-pty01 pty01
-ptem01 ptem01
-hangup01 hangup01
-
-#DESCRIPTION:Filesystem stress tests
-gf01 growfiles -W gf01 -b -e 1 -u -i 0 -L 20 -w -C 1 -l -I r -T 10 glseek20 glseek20.2
-gf02 growfiles -W gf02 -b -e 1 -L 10 -i 100 -I p -S 2 -u -f gf03_
-gf03 growfiles -W gf03 -b -e 1 -g 1 -i 1 -S 150 -u -f gf05_
-#gf04 growfiles -W gf04 -b -e 1 -g 4090 -i 500 -t 39000 -u -f gf06_
-#gf05 growfiles -W gf05 -b -e 1 -g 5000 -i 500 -t 49900 -T10 -c9 -I p -u -f gf07_
-gf06 growfiles -W gf06 -b -e 1 -u -r 1-5000 -R 0--1 -i 0 -L 30 -C 1 g_rand10 g_rand10.2
-gf07 growfiles -W gf07 -b -e 1 -u -r 1-5000 -R 0--2 -i 0 -L 30 -C 1 -I p g_rand13 g_rand13.2
-#gf08 growfiles -W gf08 -b -e 1 -u -r 1-5000 -R 0--2 -i 0 -L 30 -C 1 g_rand11 g_rand11.2
-#gf09 growfiles -W gf09 -b -e 1 -u -r 1-5000 -R 0--1 -i 0 -L 30 -C 1 -I p g_rand12 g_rand12.2
-gf10 growfiles -W gf10 -b -e 1 -u -r 1-5000 -i 0 -L 30 -C 1 -I l g_lio14 g_lio14.2
-gf11 growfiles -W gf11 -b -e 1 -u -r 1-5000 -i 0 -L 30 -C 1 -I L g_lio15 g_lio15.2
-gf12 mkfifo gffifo17; growfiles -b -W gf12 -e 1 -u -i 0 -L 30 gffifo17
-gf13 mkfifo gffifo18; growfiles -b -W gf13 -e 1 -u -i 0 -L 30 -I r -r 1-4096 gffifo18
-gf14 growfiles -W gf14 -b -e 1 -u -i 0 -L 20 -w -l -C 1 -T 10 glseek19 glseek19.2
-gf15 growfiles -W gf15 -b -e 1 -u -r 1-49600 -I r -u -i 0 -L 120 Lgfile1
-#gf16 growfiles -W gf16 -b -e 1 -i 0 -L 120 -u -g 4090 -T 100 -t 408990 -l -C 10 -c 1000 -S 10 -f Lgf02_
-gf17 growfiles -W gf17 -b -e 1 -i 0 -L 120 -u -g 5000 -T 100 -t 499990 -l -C 10 -c 1000 -S 10 -f Lgf03_
-gf18 growfiles -W gf18 -b -e 1 -i 0 -L 120 -w -u -r 10-5000 -I r -l -S 2 -f Lgf04_
-gf19 growfiles -W gf19 -b -e 1 -g 5000 -i 500 -t 49900 -T10 -c9 -I p -o O_RDWR,O_CREAT,O_TRUNC -u -f gf08i_
-gf20 growfiles -W gf20 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -r 1-256000:512 -R 512-256000 -T 4 gfbigio-$$
-#gf21 growfiles -W gf21 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -g 20480 -T 10 -t 20480 gf-bld-$$
-#gf22 growfiles -W gf22 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -g 20480 -T 10 -t 20480 gf-bldf-$$
-gf23 growfiles -W gf23 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -r 512-64000:1024 -R 1-384000 -T 4 gf-inf-$$
-gf24 growfiles -W gf24 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -g 20480 gf-jbld-$$
-gf25 growfiles -W gf25 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -r 1024000-2048000:2048 -R 4095-2048000 -T 1 gf-large-gs-$$
-gf26 growfiles -W gf26 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -r 128-32768:128 -R 512-64000 -T 4 gfsmallio-$$
-gf27 growfiles -W gf27 -b -D 0 -w -g 8b -C 1 -b -i 1000 -u gfsparse-1-$$
-#gf28 growfiles -W gf28 -b -D 0 -w -g 16b -C 1 -b -i 1000 -u gfsparse-2-$$
-#gf29 growfiles -W gf29 -b -D 0 -r 1-4096 -R 0-33554432 -i 0 -L 60 -C 1 -u gfsparse-3-$$
-gf30 growfiles -W gf30 -D 0 -b -i 0 -L 60 -u -B 1000b -e 1 -o O_RDWR,O_CREAT,O_SYNC -g 20480 -T 10 -t 20480 gf-sync-$$
-rwtest01 export LTPROOT; rwtest -N rwtest01 -c -q -i 60s -f sync 10%25000:rw-sync-$$
-rwtest02 export LTPROOT; rwtest -N rwtest02 -c -q -i 60s -f buffered 10%25000:rw-buffered-$$
-rwtest03 export LTPROOT; rwtest -N rwtest03 -c -q -i 60s -n 2 -f buffered -s mmread,mmwrite -m random -Dv 10%25000:mm-buff-$$
-rwtest04 export LTPROOT; rwtest -N rwtest04 -c -q -i 60s -n 2 -f sync -s mmread,mmwrite -m random -Dv 10%25000:mm-sync-$$
-rwtest05 export LTPROOT; rwtest -N rwtest05 -c -q -i 50 -T 64b 500b:/tmp/rwtest01%f
-
-
--
2.19.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions
2018-10-15 20:18 [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions Petr Vorel
2018-10-15 20:18 ` [LTP] [RFC PATCH 1/2] Remove LTP stress tests Petr Vorel
2018-10-15 20:18 ` [LTP] [RFC PATCH 2/2] Remove ltplite and runltplite.sh Petr Vorel
@ 2018-11-05 11:43 ` Petr Vorel
2018-11-05 14:34 ` Li Wang
2 siblings, 1 reply; 9+ messages in thread
From: Petr Vorel @ 2018-11-05 11:43 UTC (permalink / raw)
To: ltp
Hi,
> anyone using these? Objections?
> IMHO there is no point trying to keep them sync.
It looks like no objection to this, so I'll remove it.
Kind regards,
Petr
^ permalink raw reply [flat|nested] 9+ messages in thread
* [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions
2018-11-05 11:43 ` [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions Petr Vorel
@ 2018-11-05 14:34 ` Li Wang
2018-11-05 15:05 ` Jan Stancek
0 siblings, 1 reply; 9+ messages in thread
From: Li Wang @ 2018-11-05 14:34 UTC (permalink / raw)
To: ltp
Jan, did we internal ltp-lite take reference from the ltplite file? I wanna
know how do we customize our internal ltp-lite testcases.
-- Sending by my PH1 phone.
On Mon, Nov 5, 2018, 19:43 Petr Vorel <pvorel@suse.cz wrote:
> Hi,
>
> > anyone using these? Objections?
> > IMHO there is no point trying to keep them sync.
> It looks like no objection to this, so I'll remove it.
>
> Kind regards,
> Petr
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20181105/c898e360/attachment.html>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions
2018-11-05 14:34 ` Li Wang
@ 2018-11-05 15:05 ` Jan Stancek
2018-11-05 19:01 ` Petr Vorel
0 siblings, 1 reply; 9+ messages in thread
From: Jan Stancek @ 2018-11-05 15:05 UTC (permalink / raw)
To: ltp
----- Original Message -----
> Jan, did we internal ltp-lite take reference from the ltplite file?
Probably only at the beginning, when original author of beaker test
forked ltplite runtest file. I've been using syscalls/other runtest
files, since those are more up to date.
> I wanna
> know how do we customize our internal ltp-lite testcases.
syscalls + cherry-picked tests from other runtest files.
We might be getting off-topic w.r.t this mailing list.
Regards,
Jan
>
> -- Sending by my PH1 phone.
>
> On Mon, Nov 5, 2018, 19:43 Petr Vorel <pvorel@suse.cz wrote:
>
> > Hi,
> >
> > > anyone using these? Objections?
> > > IMHO there is no point trying to keep them sync.
> > It looks like no objection to this, so I'll remove it.
> >
> > Kind regards,
> > Petr
> >
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions
2018-11-05 15:05 ` Jan Stancek
@ 2018-11-05 19:01 ` Petr Vorel
2018-11-06 9:25 ` Li Wang
0 siblings, 1 reply; 9+ messages in thread
From: Petr Vorel @ 2018-11-05 19:01 UTC (permalink / raw)
To: ltp
Hi Jan, Li,
> > Jan, did we internal ltp-lite take reference from the ltplite file?
> Probably only at the beginning, when original author of beaker test
> forked ltplite runtest file. I've been using syscalls/other runtest
> files, since those are more up to date.
> > I wanna
> > know how do we customize our internal ltp-lite testcases.
> syscalls + cherry-picked tests from other runtest files.
Is it problematic for you to remove these runtest files?
Hope not, but if yes, please let me know. I'll wait for your ack before removing it.
Kind regards,
Petr
^ permalink raw reply [flat|nested] 9+ messages in thread
* [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions
2018-11-05 19:01 ` Petr Vorel
@ 2018-11-06 9:25 ` Li Wang
2018-11-06 9:43 ` Petr Vorel
0 siblings, 1 reply; 9+ messages in thread
From: Li Wang @ 2018-11-06 9:25 UTC (permalink / raw)
To: ltp
On Tue, Nov 6, 2018 at 3:01 AM, Petr Vorel <pvorel@suse.cz> wrote:
> Hi Jan, Li,
>
> > > Jan, did we internal ltp-lite take reference from the ltplite file?
>
> > Probably only at the beginning, when original author of beaker test
> > forked ltplite runtest file. I've been using syscalls/other runtest
> > files, since those are more up to date.
>
> > > I wanna
> > > know how do we customize our internal ltp-lite testcases.
>
> > syscalls + cherry-picked tests from other runtest files.
>
> Is it problematic for you to remove these runtest files?
>
I think we're OK to remove that in upstream.
> Hope not, but if yes, please let me know. I'll wait for your ack before
> removing it.
>
> Kind regards,
> Petr
>
--
Regards,
Li Wang
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20181106/db4c71ad/attachment.html>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [LTP] [RFC PATCH 0/2] Cleanup runtests containing duplicate definitions
2018-11-06 9:25 ` Li Wang
@ 2018-11-06 9:43 ` Petr Vorel
0 siblings, 0 replies; 9+ messages in thread
From: Petr Vorel @ 2018-11-06 9:43 UTC (permalink / raw)
To: ltp
Hi Li,
> On Tue, Nov 6, 2018 at 3:01 AM, Petr Vorel <pvorel@suse.cz> wrote:
> > Hi Jan, Li,
> > > > Jan, did we internal ltp-lite take reference from the ltplite file?
> > > Probably only at the beginning, when original author of beaker test
> > > forked ltplite runtest file. I've been using syscalls/other runtest
> > > files, since those are more up to date.
> > > > I wanna
> > > > know how do we customize our internal ltp-lite testcases.
> > > syscalls + cherry-picked tests from other runtest files.
> > Is it problematic for you to remove these runtest files?
> I think we're OK to remove that in upstream.
Thanks for info, pushed.
Kind regards,
Petr
^ permalink raw reply [flat|nested] 9+ messages in thread