From: Richard Palethorpe <rpalethorpe@suse.de>
To: Andrea Cervesato <andrea.cervesato@suse.com>
Cc: ltp@lists.linux.it
Subject: Re: [LTP] [PATCH v4] Refactor pidns16 test using new LTP API
Date: Mon, 13 Feb 2023 15:19:15 +0000 [thread overview]
Message-ID: <874jrppp7n.fsf@suse.de> (raw)
In-Reply-To: <20230207122731.29303-1-andrea.cervesato@suse.com>
Hello,
Merged without child return value and I added volatile to the
signal_pid.
Andrea Cervesato via ltp <ltp@lists.linux.it> writes:
> Signed-off-by: Andrea Cervesato <andrea.cervesato@suse.com>
> ---
> Removed counter flag that now is unused
>
> testcases/kernel/containers/pidns/pidns16.c | 191 ++++++--------------
> 1 file changed, 60 insertions(+), 131 deletions(-)
>
> diff --git a/testcases/kernel/containers/pidns/pidns16.c b/testcases/kernel/containers/pidns/pidns16.c
> index 2ee61065a..430cf4dd8 100644
> --- a/testcases/kernel/containers/pidns/pidns16.c
> +++ b/testcases/kernel/containers/pidns/pidns16.c
> @@ -1,157 +1,86 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> /*
> -* Copyright (c) International Business Machines Corp., 2007
> -* This program is free software; you can redistribute it and/or modify
> -* it under the terms of the GNU General Public License as published by
> -* the Free Software Foundation; either version 2 of the License, or
> -* (at your option) any later version.
> -* This program is distributed in the hope that it will be useful,
> -* but WITHOUT ANY WARRANTY; without even the implied warranty of
> -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
> -* the GNU General Public License for more details.
> -* You should have received a copy of the GNU General Public License
> -* along with this program; if not, write to the Free Software
> -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> -*
> -***************************************************************************
> -
> -* * Test Assertion.
> -* *----------------
> -* * kill -USR1 container_init
> -* * - from the parent process and also inside a container
> -* * - Where init has defined a custom handler for USR1
> -* * - Should call the handler and
> -* * - Verify whether the signal handler is called from the proper process.
> -* *
> -* * Description:
> -* * Create PID namespace container.
> -* * Container init defines the handler for SIGUSR1 and waits indefinetly.
> -* * Parent sends SIGUSR1 to container init.
> -* * The signal handler is handled and the cont-init resumes normally.
> -* * From the container, again the signal SIGUSR1 is sent.
> -* * In the sig-handler check if it's invoked from correct pid(parent/container)
> -* * If cont-init wakes up properly -
> -* * it will return expected value at exit which is verified at the end.
> -* *
> -* * History:
> -* * DATE NAME DESCRIPTION
> -* * 04/11/08 Veerendra C <vechandr@in.ibm.com> Verifying cont init kill -USR1
> -*
> -*******************************************************************************/
> -#include "config.h"
> + * Copyright (c) International Business Machines Corp., 2007
> + * 04/11/08 Veerendra C <vechandr@in.ibm.com>
> + * Copyright (C) 2023 SUSE LLC Andrea Cervesato <andrea.cervesato@suse.com>
> + */
> +
> +/*\
> + * [Description]
> + *
> + * Clone a process with CLONE_NEWPID flag and verifies that siginfo->si_pid is
> + * set to 0 if sender (parent process) sent the signal. Then send signal from
> + * container itself and check if siginfo->si_pid is set to 1.
> + */
>
> #define _GNU_SOURCE 1
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <sys/wait.h>
> -#include <sys/types.h>
> #include <signal.h>
> -#include <unistd.h>
> -#include "pidns_helper.h"
> -#include "test.h"
> -
> -#define CHILD_PID 1
> -#define PARENT_PID 0
> +#include "tst_test.h"
> +#include "lapi/sched.h"
>
> -char *TCID = "pidns16";
> -int TST_TOTAL = 3;
> +static int signal_pid;
>
> -void child_signal_handler(int sig, siginfo_t * si, void *unused)
> +static void child_signal_handler(LTP_ATTRIBUTE_UNUSED int sig, siginfo_t *si, LTP_ATTRIBUTE_UNUSED void *unused)
> {
> - static int c = 1;
> - pid_t expected_pid;
> -
> - /* Verifying from which process the signal handler is signalled */
> -
> - switch (c) {
> - case 1:
> - expected_pid = PARENT_PID;
> - break;
> - case 2:
> - expected_pid = CHILD_PID;
> - break;
> - default:
> - tst_resm(TBROK, "child should NOT be signalled 3+ times");
> - return;
> - }
> -
> - if (si->si_pid == expected_pid)
> - tst_resm(TPASS, "child is signalled from expected pid %d",
> - expected_pid);
> - else
> - tst_resm(TFAIL, "child is signalled from unexpected pid %d,"
> - " expecting pid %d", si->si_pid, expected_pid);
> -
> - c++;
> + signal_pid = si->si_pid;
> }
>
> -/*
> - * child_fn() - Inside container
> - */
> -int child_fn(void *ttype)
> +static int child_func(void)
> {
> struct sigaction sa;
> - pid_t pid, ppid;
> + pid_t cpid, ppid;
>
> - /* Set process id and parent pid */
> - pid = getpid();
> + cpid = getpid();
> ppid = getppid();
>
> - if ((pid != CHILD_PID) || (ppid != PARENT_PID))
> - tst_resm(TBROK, "pidns is not created.");
> + TST_EXP_EQ_LI(cpid, 1);
> + TST_EXP_EQ_LI(ppid, 0);
> +
> + tst_res(TINFO, "Catching SIGUSR1 signal");
>
> - /* Set signal handler for SIGUSR1, also mask other signals */
> sa.sa_flags = SA_SIGINFO;
> - sigemptyset(&sa.sa_mask);
> + SAFE_SIGFILLSET(&sa.sa_mask);
> sa.sa_sigaction = child_signal_handler;
> - if (sigaction(SIGUSR1, &sa, NULL) == -1)
> - tst_resm(TBROK, "%d: sigaction() failed", pid);
> -
> - pause();
> - tst_resm(TINFO, "Container: Resumed after receiving SIGUSR1 "
> - "from parentNS ");
> - if (kill(pid, SIGUSR1) != 0) {
> - tst_resm(TFAIL, "kill(SIGUSR1) fails.");
> - }
> - tst_resm(TINFO, "Container: Resumed after sending SIGUSR1 "
> - "from container itself");
> - _exit(10);
> -}
> + SAFE_SIGACTION(SIGUSR1, &sa, NULL);
>
> -static void setup(void)
> -{
> - tst_require_root();
> - check_newpid();
> + TST_CHECKPOINT_WAKE_AND_WAIT(0);
> +
> + TST_EXP_EQ_LI(signal_pid, 0);
> +
> + tst_res(TINFO, "Sending SIGUSR1 from container itself");
> +
> + SAFE_KILL(cpid, SIGUSR1);
> +
> + TST_EXP_EQ_LI(signal_pid, 1);
> +
> + return 0;
> }
>
> -/***********************************************************************
> -* M A I N
> -***********************************************************************/
> -int main()
> +static void run(void)
> {
> - int status;
> - pid_t cpid;
> -
> - setup();
> + const struct tst_clone_args args = { CLONE_NEWPID, SIGCHLD };
> + pid_t pid;
>
> - cpid = ltp_clone_quick(CLONE_NEWPID | SIGCHLD, child_fn, NULL);
> + signal_pid = -1;
>
> - if (cpid < 0) {
> - tst_resm(TBROK, "clone() failed.");
> + pid = SAFE_CLONE(&args);
> + if (!pid) {
> + child_func();
> + return;
> }
>
> - sleep(1);
> - if (kill(cpid, SIGUSR1) != 0) {
> - tst_resm(TFAIL, "kill(SIGUSR1) fails.");
> - }
> - sleep(1);
> - if (waitpid(cpid, &status, 0) < 0)
> - tst_resm(TWARN, "waitpid() failed.");
> -
> - if ((WIFEXITED(status)) && (WEXITSTATUS(status) == 10))
> - tst_resm(TPASS, "container init continued successfuly, "
> - "after handling signal -USR1");
> - else
> - tst_resm(TFAIL, "c-init failed to continue after "
> - "passing kill -USR1");
> - tst_exit();
> + TST_CHECKPOINT_WAIT(0);
> +
> + tst_res(TINFO, "Sending SIGUSR1 from parent");
> +
> + SAFE_KILL(pid, SIGUSR1);
> +
> + TST_CHECKPOINT_WAKE(0);
> }
> +
> +static struct tst_test test = {
> + .test_all = run,
> + .needs_root = 1,
> + .needs_checkpoints = 1,
> + .forks_child = 1,
> +};
> --
> 2.35.3
--
Thank you,
Richard.
--
Mailing list info: https://lists.linux.it/listinfo/ltp
prev parent reply other threads:[~2023-02-13 15:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-07 12:27 [LTP] [PATCH v4] Refactor pidns16 test using new LTP API Andrea Cervesato via ltp
2023-02-13 15:19 ` Richard Palethorpe [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874jrppp7n.fsf@suse.de \
--to=rpalethorpe@suse.de \
--cc=andrea.cervesato@suse.com \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox