From: Richard Palethorpe <rpalethorpe@suse.de>
To: Li Wang <liwang@redhat.com>
Cc: ltp@lists.linux.it
Subject: Re: [LTP] [PATCH v2 2/2] getitimer01: add checking for nonzero timer
Date: Thu, 17 Nov 2022 09:57:47 +0000 [thread overview]
Message-ID: <87edu1rjh4.fsf@suse.de> (raw)
In-Reply-To: <20221116122646.4085688-2-liwang@redhat.com>
Hello,
Li Wang <liwang@redhat.com> writes:
> By default a new process disabled the timer and getitimer()
> returned zero value. But we also need to check if the timer
> is correct when reset to nonzero.
>
> Signed-off-by: Li Wang <liwang@redhat.com>
> ---
>
> Notes:
> v1 --> v2
> * reset itimer value to zero to make parameter '-i' works
> * print the time at the begining and end of test
> * sperately compare result for tv_sec elapse or not
> * print more info when TFAIL
Merged, thanks!
>
> .../kernel/syscalls/getitimer/getitimer01.c | 108 ++++++++++++++++--
> 1 file changed, 96 insertions(+), 12 deletions(-)
>
> diff --git a/testcases/kernel/syscalls/getitimer/getitimer01.c b/testcases/kernel/syscalls/getitimer/getitimer01.c
> index 5ecfac55c..6b0cfba1c 100644
> --- a/testcases/kernel/syscalls/getitimer/getitimer01.c
> +++ b/testcases/kernel/syscalls/getitimer/getitimer01.c
> @@ -12,25 +12,109 @@
> */
>
> #include "tst_test.h"
> +#include "tst_safe_clocks.h"
>
> -static int itimer_name[] = {
> - ITIMER_REAL,
> - ITIMER_VIRTUAL,
> - ITIMER_PROF,
> +#define SEC 100
> +#define USEC 10000
> +
> +static struct timeval tv;
> +static struct itimerval *value;
> +static long jiffy;
> +
> +static struct tcase {
> + int which;
> + char *des;
> +} tcases[] = {
> + {ITIMER_REAL, "ITIMER_REAL"},
> + {ITIMER_VIRTUAL, "ITIMER_VIRTUAL"},
> + {ITIMER_PROF, "ITIMER_PROF"},
> };
>
> -static void run(void)
> +static void set_setitimer_value(int sec, int usec)
> +{
> + value->it_value.tv_sec = sec;
> + value->it_value.tv_usec = usec;
> + value->it_interval.tv_sec = sec;
> + value->it_interval.tv_usec = usec;
> +}
> +
> +static void verify_getitimer(unsigned int i)
> {
> - long unsigned int i;
> - struct itimerval value;
> + struct tcase *tc = &tcases[i];
> +
> + tst_res(TINFO, "tc->which = %s", tc->des);
>
> - for (i = 0; i < ARRAY_SIZE(itimer_name); i++) {
> - TST_EXP_PASS(getitimer(itimer_name[i], &value));
> - TST_EXP_EQ_LI(value.it_value.tv_sec, 0);
> - TST_EXP_EQ_LI(value.it_value.tv_usec, 0);
> + if (tc->which == ITIMER_REAL) {
> + if (gettimeofday(&tv, NULL) == -1)
> + tst_brk(TBROK | TERRNO, "gettimeofday(&tv1, NULL) failed");
> + else
> + tst_res(TINFO, "Test begin time: %ld.%lds", tv.tv_sec, tv.tv_usec);
> }
> +
> + TST_EXP_PASS(getitimer(tc->which, value));
> + TST_EXP_EQ_LI(value->it_value.tv_sec, 0);
> + TST_EXP_EQ_LI(value->it_value.tv_usec, 0);
> + TST_EXP_EQ_LI(value->it_interval.tv_sec, 0);
> + TST_EXP_EQ_LI(value->it_interval.tv_usec, 0);
> +
> + set_setitimer_value(SEC, USEC);
> + TST_EXP_PASS(setitimer(tc->which, value, NULL));
> +
> + set_setitimer_value(0, 0);
> + TST_EXP_PASS(getitimer(tc->which, value));
> +
> + TST_EXP_EQ_LI(value->it_interval.tv_sec, SEC);
> + TST_EXP_EQ_LI(value->it_interval.tv_usec, USEC);
> +
> + tst_res(TINFO, "value->it_value.tv_sec=%ld, value->it_value.tv_usec=%ld",
> + value->it_value.tv_sec, value->it_value.tv_usec);
> +
> + /*
> + * ITIMER_VIRTUAL and ITIMER_PROF timers always expire a
> + * TICK_NSEC (jiffy) afterward the elapsed time to make
> + * sure that at least time counters take effect.
> + */
> + long margin = (tc->which == ITIMER_REAL) ? 0 : jiffy;
> +
> + if (value->it_value.tv_sec == SEC) {
> + if (value->it_value.tv_usec < 0 ||
> + value->it_value.tv_usec > USEC + margin)
> + tst_brk(TFAIL, "value->it_value.tv_usec is out of range: %ld",
> + value->it_value.tv_usec);
> + } else {
> + if (value->it_value.tv_sec < 0 ||
> + value->it_value.tv_sec > SEC)
> + tst_brk(TFAIL, "value->it_value.tv_sec is out of range: %ld",
> + value->it_value.tv_sec);
> + }
> +
> + tst_res(TPASS, "timer value is within the expected range");
> +
> + if (tc->which == ITIMER_REAL) {
> + if (gettimeofday(&tv, NULL) == -1)
> + tst_brk(TBROK | TERRNO, "gettimeofday(&tv1, NULL) failed");
> + else
> + tst_res(TINFO, "Test end time: %ld.%lds", tv.tv_sec, tv.tv_usec);
> + }
> +
> + set_setitimer_value(0, 0);
> + TST_EXP_PASS_SILENT(setitimer(tc->which, value, NULL));
> +}
> +
> +static void setup(void)
> +{
> + struct timespec time_res;
> +
> + SAFE_CLOCK_GETRES(CLOCK_MONOTONIC_COARSE, &time_res);
> + jiffy = (time_res.tv_nsec + 999) / 1000;
> }
>
> static struct tst_test test = {
> - .test_all = run
> + .tcnt = ARRAY_SIZE(tcases),
> + .setup = setup,
> + .test = verify_getitimer,
> + .bufs = (struct tst_buffers[]) {
> + {&value, .size = sizeof(struct itimerval)},
> + {}
> + }
> };
--
Thank you,
Richard.
--
Mailing list info: https://lists.linux.it/listinfo/ltp
next prev parent reply other threads:[~2022-11-17 9:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-16 12:26 [LTP] [PATCH v2 1/2] setitimer01: add interval timer test Li Wang
2022-11-16 12:26 ` [LTP] [PATCH v2 2/2] getitimer01: add checking for nonzero timer Li Wang
2022-11-17 9:57 ` Richard Palethorpe [this message]
2022-11-17 9:57 ` [LTP] [PATCH v2 1/2] setitimer01: add interval timer test Richard Palethorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87edu1rjh4.fsf@suse.de \
--to=rpalethorpe@suse.de \
--cc=liwang@redhat.com \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox