From: Andrea Cervesato via ltp <ltp@lists.linux.it>
To: "Jinseok Kim" <always.starving0@gmail.com>, <ltp@lists.linux.it>
Subject: Re: [LTP] [PATCH v3 2/2] fstat: add test for multiple file types using fstat
Date: Wed, 25 Feb 2026 15:30:11 +0100 [thread overview]
Message-ID: <DGO4558ZMLNH.3U00SNOHLUVXJ@suse.com> (raw)
In-Reply-To: <20260225131922.5723-2-always.starving0@gmail.com>
Hi!
> +
> +static struct tcase {
> + const char *desc;
> + const char *path;
> + const char *macro_name;
> + mode_t exp_type;
> +} tcases[] = {
> + { "regular file", REG_FILE, "S_IFREG", S_IFREG },
> + { "directory", DIR_FILE, "S_IFDIR", S_IFDIR },
> + { "FIFO (pipe)", FIFO_FILE, "S_IFIFO", S_IFIFO },
> + { "symbolic link", SYMLINK, "S_IFLNK", S_IFLNK },
> + { "character dev", CHR_DEV, "S_IFCHR", S_IFCHR },
> + { "block dev", BLK_DEV, "S_IFBLK", S_IFBLK },
Makes more sense to merge desc and macro_name together. Then see below:
> +};
> +
> +static void verify_fstat(unsigned int i)
> +{
> + struct tcase *tc = &tcases[i];
> + struct stat buf;
> +
> + int flags = O_RDONLY | O_NONBLOCK;
> +
> + if (tc->exp_type == S_IFDIR)
> + flags |= O_DIRECTORY;
> +
> + fd = SAFE_OPEN(tc->path, flags);
> +
> + SAFE_FSTAT(fd, &buf);
> + SAFE_CLOSE(fd);
You can just use:
SAFE_LSTAT(tc->path, &buf);
Otherwise test will fail with:
fstat04.c:74: TPASS: Expect: regular file: macro matches
fstat04.c:74: TPASS: Expect: directory: macro matches
fstat04.c:74: TPASS: Expect: FIFO (pipe): macro matches
fstat04.c:74: TFAIL: Expect: symbolic link: macro matches
fstat04.c:46: TBROK: open(chrdev,2048,0000) failed: EACCES (13)
> +
> + int is_correct = 0;
> +
> + switch (tc->exp_type) {
> + case S_IFREG:
> + is_correct = S_ISREG(buf.st_mode);
> + break;
> + case S_IFDIR:
> + is_correct = S_ISDIR(buf.st_mode);
> + break;
> + case S_IFIFO:
> + is_correct = S_ISFIFO(buf.st_mode);
> + break;
> + case S_IFLNK:
> + is_correct = S_ISLNK(buf.st_mode);
> + break;
> + case S_IFCHR:
> + is_correct = S_ISCHR(buf.st_mode);
> + break;
> + case S_IFBLK:
> + is_correct = S_ISBLK(buf.st_mode);
> + break;
> + }
> +
> + if (is_correct)
> + tst_res(TPASS, "%s: %s() macro matches", tc->desc, tc->macro_name);
> + else
> + tst_res(TFAIL, "%s: %s() macro does NOT match", tc->desc, tc->macro_name);
We don't need an if statement here. We can just:
TST_EXP_EXPR(is_correct, "%s macro matches", tc->desc);
> +static void setup(void)
> +{
> + fd = SAFE_OPEN(REG_FILE, O_WRONLY | O_CREAT | O_TRUNC, 0644);
> + SAFE_CLOSE(fd);
Just use SAFE_TOUCH() in here, so `fd` can be removed also from the
static variables.
--
Andrea Cervesato
SUSE QE Automation Engineer Linux
andrea.cervesato@suse.com
--
Mailing list info: https://lists.linux.it/listinfo/ltp
next prev parent reply other threads:[~2026-02-25 14:30 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-11 17:16 [LTP] [PATCH] open: fix directory verification and misleading test description Jinseok Kim
2026-02-17 13:21 ` Andrea Cervesato via ltp
2026-02-19 10:31 ` Cyril Hrubis
2026-02-19 14:57 ` Jinseok Kim
2026-02-20 10:49 ` Cyril Hrubis
2026-02-24 7:37 ` [LTP] [PATCH 1/2] open: remove O_DIRECTORY case (move to fstat test) Jinseok Kim
2026-02-24 7:37 ` [LTP] [PATCH 2/2] Add test for multiple file types using fstat Jinseok Kim
2026-02-24 8:17 ` [LTP] [PATCH 1/2] open: remove O_DIRECTORY case (move to fstat test) Andrea Cervesato via ltp
2026-02-24 10:07 ` [LTP] [PATCH v2 " Jinseok Kim
2026-02-24 10:07 ` [LTP] [PATCH v2 2/2] fstat: add test for multiple file types using fstat Jinseok Kim
2026-02-24 14:17 ` Andrea Cervesato via ltp
2026-02-25 13:19 ` [LTP] [PATCH v3 1/2] open: remove O_DIRECTORY case (move to fstat test) Jinseok Kim
2026-02-25 13:19 ` [LTP] [PATCH v3 2/2] fstat: add test for multiple file types using fstat Jinseok Kim
2026-02-25 14:30 ` Andrea Cervesato via ltp [this message]
2026-02-26 15:32 ` Jinseok Kim
2026-02-26 15:44 ` Andrea Cervesato via ltp
2026-03-03 13:32 ` [LTP] [PATCH v4 1/2] open: remove O_DIRECTORY case (move to fstat test) Jinseok Kim
2026-03-03 13:32 ` [LTP] [PATCH v4 2/2] fstat: add test for multiple file types using fstat Jinseok Kim
2026-03-12 11:22 ` Andrea Cervesato via ltp
2026-03-13 14:07 ` Jinseok Kim
2026-03-13 15:36 ` Andrea Cervesato via ltp
2026-03-15 7:27 ` [LTP] [PATCH v5 1/2] open: remove O_DIRECTORY case (move to fstat test) Jinseok Kim
2026-03-15 7:27 ` [LTP] [PATCH v5 2/2] fstat: add test for multiple file types using fstat Jinseok Kim
2026-03-16 7:38 ` [LTP] [PATCH v5 1/2] open: remove O_DIRECTORY case (move to fstat test) Andrea Cervesato via ltp
2026-03-16 15:00 ` [LTP] [PATCH v6 " Jinseok Kim
2026-03-16 15:00 ` [LTP] [PATCH v6 2/2] fstat: add test for multiple file types using fstat Jinseok Kim
2026-03-24 12:17 ` Andrea Cervesato via ltp
2026-03-27 15:27 ` [LTP] [PATCH v7] " Jinseok Kim
2026-03-30 8:07 ` Andrea Cervesato via ltp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DGO4558ZMLNH.3U00SNOHLUVXJ@suse.com \
--to=ltp@lists.linux.it \
--cc=always.starving0@gmail.com \
--cc=andrea.cervesato@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox