lustre-devel-lustre.org archive mirror
 help / color / mirror / Atom feed
From: James Simmons <jsimmons@infradead.org>
To: Andreas Dilger <adilger@whamcloud.com>,
	Oleg Drokin <green@whamcloud.com>, NeilBrown <neilb@suse.de>
Cc: Patrick Farrell <farr0186@gmail.com>,
	Lustre Development List <lustre-devel@lists.lustre.org>
Subject: [lustre-devel] [PATCH 15/25] lustre: osc: Improve osc_queue_sync_pages
Date: Mon,  2 Aug 2021 15:50:35 -0400	[thread overview]
Message-ID: <1627933851-7603-16-git-send-email-jsimmons@infradead.org> (raw)
In-Reply-To: <1627933851-7603-1-git-send-email-jsimmons@infradead.org>

From: Patrick Farrell <farr0186@gmail.com>

This patch was split and partially done in:
https://review.whamcloud.com/38214

So the text below refers to the combination of this patch
and that one.  This patch now just improves a looped atomic
add by replacing with a single one.  The rest of the grant
calcuation change is in
https://review.whamcloud.com/38214

(I am retaining the text below to show the performance
 improvement)
----------
osc_queue_sync_pages now has a grant calculation component,
this has a pretty painful impact on the new faster DIO
performance.  Specifically, per page ktime_get() and the
per-page atomic_add cost close to 10% of total CPU time in
the DIO path.

We can make this per batch of pages rather than for each
page, which reduces this cost from 10% of CPU to almost
nothing.

This improves write performance by about 10% (but has no
effect on reads, since they don't use grant).

This patch reduces i/o time in ms/GiB by:
Write: 10 ms/GiB
Read: 0 ms/GiB

Totals:
Write: 158 ms/GiB
Read: 161 ms/GiB

mpirun -np 1 $IOR -w -t 1G -b 64G -o $FILE --posix.odirect

Before patch:
write     6071

After patch:
write     6470

(Read is similar.)

This also fixes a mistake in d23d4cb67c / LU-13419 where it
removed the shrink interval update entirely from the direct
i/o path.

Fixes: d23d4cb67c ("lustre: osc: Move shrink update to per-write")
WC-bug-id: https://jira.whamcloud.com/browse/LU-13419
Lustre-commit: 87c4535f7a5d239a ("LU-13799 osc: Improve osc_queue_sync_pages")
Signed-off-by: Patrick Farrell <farr0186@gmail.com>
Reviewed-on: https://review.whamcloud.com/39482
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
---
 fs/lustre/osc/osc_cache.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/lustre/osc/osc_cache.c b/fs/lustre/osc/osc_cache.c
index 50f6477..69cf9ba 100644
--- a/fs/lustre/osc/osc_cache.c
+++ b/fs/lustre/osc/osc_cache.c
@@ -2715,8 +2715,8 @@ int osc_queue_sync_pages(const struct lu_env *env, struct cl_io *io,
 			list_for_each_entry(oap, list, oap_pending_item) {
 				osc_consume_write_grant(cli,
 							&oap->oap_brw_page);
-				atomic_long_inc(&obd_dirty_pages);
 			}
+			atomic_long_add(page_count, &obd_dirty_pages);
 			osc_unreserve_grant_nolock(cli, grants, 0);
 			ext->oe_grants = grants;
 		} else {
@@ -2730,6 +2730,7 @@ int osc_queue_sync_pages(const struct lu_env *env, struct cl_io *io,
 			"not enough grant available, switching to sync for this i/o\n");
 		}
 		spin_unlock(&cli->cl_loi_list_lock);
+		osc_update_next_shrink(cli);
 	}
 
 	ext->oe_is_rdma_only = !!(brw_flags & OBD_BRW_RDMA_ONLY);
-- 
1.8.3.1

_______________________________________________
lustre-devel mailing list
lustre-devel@lists.lustre.org
http://lists.lustre.org/listinfo.cgi/lustre-devel-lustre.org

  parent reply	other threads:[~2021-08-02 19:51 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-02 19:50 [lustre-devel] [PATCH 00/25] Sync to OpenSFS tree as of Aug 2, 2021 James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 01/25] lustre: llite: avoid stale data reading James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 02/25] lustre: llite: No locked parallel DIO James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 03/25] lnet: discard lnet_current_net_count James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 04/25] lnet: convert kiblnd/ksocknal_thread_start to vararg James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 05/25] lnet: print device status in net show command James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 06/25] lustre: lmv: getattr_name("..") under striped directory James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 07/25] lustre: llite: revert 'simplify callback handling for async getattr' James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 08/25] lnet: Protect lpni deref in lnet_health_check James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 09/25] lustre: uapi: remove MDS_SETATTR_PORTAL and service James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 10/25] lustre: llite: Modify AIO/DIO reference counting James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 11/25] lustre: llite: Remove transient page counting James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 12/25] lustre: lov: Improve DIO submit James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 13/25] lustre: llite: Adjust dio refcounting James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 14/25] lustre: clio: Skip prep for transients James Simmons
2021-08-02 19:50 ` James Simmons [this message]
2021-08-02 19:50 ` [lustre-devel] [PATCH 16/25] lustre: llite: avoid project quota overflow James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 17/25] lnet: check memdup_user_nul using IS_ERR James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 18/25] lustre: osc: Remove lockless truncate James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 19/25] lustre: osc: Remove client contention support James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 20/25] lustre: osc: osc: Do not flush on lockless cancel James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 21/26] lustre: pcc: add LCM_FL_PCC_RDONLY layout flag James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 21/25] lustre: update version to 2.14.53 James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 22/25] lustre: mdc: set default LMV on ROOT James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 22/26] lustre: update version to 2.14.53 James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 23/25] lustre: llite: enable filesystem-wide default LMV James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 23/26] lustre: mdc: set default LMV on ROOT James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 24/25] lnet: o2iblnd: clear fatal error on successful failover James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 24/26] lustre: llite: enable filesystem-wide default LMV James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 25/25] lnet: add "stats reset" to lnetctl James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 25/26] lnet: o2iblnd: clear fatal error on successful failover James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 26/26] lnet: add "stats reset" to lnetctl James Simmons

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1627933851-7603-16-git-send-email-jsimmons@infradead.org \
    --to=jsimmons@infradead.org \
    --cc=adilger@whamcloud.com \
    --cc=farr0186@gmail.com \
    --cc=green@whamcloud.com \
    --cc=lustre-devel@lists.lustre.org \
    --cc=neilb@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).