lvs-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abhijeet Rastogi <abhijeet.1989@gmail.com>
To: Simon Horman <horms@verge.net.au>, Julian Anastasov <ja@ssi.bg>,
	Pablo Neira Ayuso <pablo@netfilter.org>,
	Jozsef Kadlecsik <kadlec@netfilter.org>,
	Florian Westphal <fw@strlen.de>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, lvs-devel@vger.kernel.org,
	netfilter-devel@vger.kernel.org, coreteam@netfilter.org,
	linux-kernel@vger.kernel.org,
	Abhijeet Rastogi <abhijeet.1989@gmail.com>
Subject: [PATCH v3] ipvs: increase ip_vs_conn_tab_bits range for 64BIT
Date: Tue, 16 May 2023 20:08:49 -0700	[thread overview]
Message-ID: <20230412-increase_ipvs_conn_tab_bits-v3-1-c813278f2d24@gmail.com> (raw)

Current range [8, 20] is set purely due to historical reasons
because at the time, ~1M (2^20) was considered sufficient.
With this change, 27 is the upper limit for 64-bit, 20 otherwise.

Previous change regarding this limit is here.

Link: https://lore.kernel.org/all/86eabeb9dd62aebf1e2533926fdd13fed48bab1f.1631289960.git.aclaudi@redhat.com/T/#u

Signed-off-by: Abhijeet Rastogi <abhijeet.1989@gmail.com>
---
The conversation for this started at: 

https://www.spinics.net/lists/netfilter/msg60995.html

The upper limit for algo is any bit size less than 32, so this
change will allow us to set bit size > 20. Today, it is common to have
RAM available to handle greater than 2^20 connections per-host.

Distros like RHEL already allow setting limits higher than 20.
---
Changes in v3:
- Fix text width in Kconfig, now text is 70 columns, excluding tab.
- Link to v2: https://lore.kernel.org/r/20230412-increase_ipvs_conn_tab_bits-v2-1-994c0df018e6@gmail.com

Changes in v2:
- Lower the ranges, 27 for 64bit, 20 otherwise
- Link to v1: https://lore.kernel.org/r/20230412-increase_ipvs_conn_tab_bits-v1-1-60a4f9f4c8f2@gmail.com
---
 net/netfilter/ipvs/Kconfig      | 27 ++++++++++++++-------------
 net/netfilter/ipvs/ip_vs_conn.c |  4 ++--
 2 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index 271da8447b29..2a3017b9c001 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -44,7 +44,8 @@ config	IP_VS_DEBUG
 
 config	IP_VS_TAB_BITS
 	int "IPVS connection table size (the Nth power of 2)"
-	range 8 20
+	range 8 20 if !64BIT
+	range 8 27 if 64BIT
 	default 12
 	help
 	  The IPVS connection hash table uses the chaining scheme to handle
@@ -54,24 +55,24 @@ config	IP_VS_TAB_BITS
 
 	  Note the table size must be power of 2. The table size will be the
 	  value of 2 to the your input number power. The number to choose is
-	  from 8 to 20, the default number is 12, which means the table size
-	  is 4096. Don't input the number too small, otherwise you will lose
-	  performance on it. You can adapt the table size yourself, according
-	  to your virtual server application. It is good to set the table size
-	  not far less than the number of connections per second multiplying
-	  average lasting time of connection in the table.  For example, your
-	  virtual server gets 200 connections per second, the connection lasts
-	  for 200 seconds in average in the connection table, the table size
-	  should be not far less than 200x200, it is good to set the table
-	  size 32768 (2**15).
+	  from 8 to 27 for 64BIT(20 otherwise), the default number is 12,
+	  which means the table size is 4096. Don't input the number too
+	  small, otherwise you will lose performance on it. You can adapt the
+	  table size yourself, according to your virtual server application.
+	  It is good to set the table size not far less than the number of
+	  connections per second multiplying average lasting time of
+	  connection in the table.  For example, your virtual server gets 200
+	  connections per second, the connection lasts for 200 seconds in
+	  average in the connection table, the table size should be not far
+	  less than 200x200, it is good to set the table size 32768 (2**15).
 
 	  Another note that each connection occupies 128 bytes effectively and
 	  each hash entry uses 8 bytes, so you can estimate how much memory is
 	  needed for your box.
 
 	  You can overwrite this number setting conn_tab_bits module parameter
-	  or by appending ip_vs.conn_tab_bits=? to the kernel command line
-	  if IP VS was compiled built-in.
+	  or by appending ip_vs.conn_tab_bits=? to the kernel command line if
+	  IP VS was compiled built-in.
 
 comment "IPVS transport protocol load balancing support"
 
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 13534e02346c..e1b9b52909a5 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -1484,8 +1484,8 @@ int __init ip_vs_conn_init(void)
 	int idx;
 
 	/* Compute size and mask */
-	if (ip_vs_conn_tab_bits < 8 || ip_vs_conn_tab_bits > 20) {
-		pr_info("conn_tab_bits not in [8, 20]. Using default value\n");
+	if (ip_vs_conn_tab_bits < 8 || ip_vs_conn_tab_bits > 27) {
+		pr_info("conn_tab_bits not in [8, 27]. Using default value\n");
 		ip_vs_conn_tab_bits = CONFIG_IP_VS_TAB_BITS;
 	}
 	ip_vs_conn_tab_size = 1 << ip_vs_conn_tab_bits;

---
base-commit: 09a9639e56c01c7a00d6c0ca63f4c7c41abe075d
change-id: 20230412-increase_ipvs_conn_tab_bits-4322c90da216

Best regards,
-- 
Abhijeet Rastogi <abhijeet.1989@gmail.com>


             reply	other threads:[~2023-05-17  3:08 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-17  3:08 Abhijeet Rastogi [this message]
2023-05-17 12:29 ` [PATCH v3] ipvs: increase ip_vs_conn_tab_bits range for 64BIT Julian Anastasov
2023-05-18 18:52 ` Simon Horman
2023-06-01 19:17 ` Pablo Neira Ayuso
     [not found]   ` <CACXxYfyA9mB+M23kBa4X6HHih6C4tSMC3GLvZb45--10xVyBRg@mail.gmail.com>
2023-06-29  6:02     ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230412-increase_ipvs_conn_tab_bits-v3-1-c813278f2d24@gmail.com \
    --to=abhijeet.1989@gmail.com \
    --cc=coreteam@netfilter.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=fw@strlen.de \
    --cc=horms@verge.net.au \
    --cc=ja@ssi.bg \
    --cc=kadlec@netfilter.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lvs-devel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=netfilter-devel@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pablo@netfilter.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).