messages from 2026-10-21 16:12:41 to 2026-10-27 11:46:56 UTC [more...]
[PATCH v4 0/4] mfd: max8907: Schema, pdata and poweroff
2026-10-27 11:46 UTC (5+ messages)
` [PATCH v4 1/4] regulator: dt-bindings: maxim,max8907: Convert to DT schema
` [PATCH v4 2/4] mfd: max8907: Remove platform_data based probing
` [PATCH v4 3/4] mfd: max8907: Switch to resource-managed versions of helpers
` [PATCH v4 4/4] mfd: max8907: Convert to use device managed poweroff handler
[PATCH v5 0/4] mfd: aat2870: Convert to use OF bindings
2026-10-27 11:46 UTC (9+ messages)
` [PATCH v5 1/4] dt-bindings: leds: Document Skyworks AAT2870
` [PATCH v5 2/4] backlight: aat2870: Derive brightness steps from max current
` [PATCH v5 3/4] mfd: aat2870: Convert to use OF bindings
` [PATCH v5 4/4] mfd: aat2870: Add support for VIN and IN-LDO power supplies
[PATCH v4 00/12] hwmon: Add Qualcomm SPMI BCL driver
2026-10-27 11:21 UTC (3+ messages)
` [PATCH v4 02/12] hwmon: Add Qualcomm PMIC "
[PATCH v2 00/27] mfd: Assorted resource lifetime, teardown, and error-handling fixes
2026-10-27 9:30 UTC (27+ messages)
` [PATCH v2 01/27] mfd: nct6694: Allocate USB DMA buffers with kzalloc_obj()
` [PATCH v2 02/27] mfd: ls2kbmc: Unregister GPIO GSI via devm_add_action_or_reset()
` [PATCH v2 03/27] mfd: ls2kbmc: Cancel reset work on teardown via devm_work_autocancel()
` [PATCH v2 04/27] mfd: ls2kbmc: Allocate simplefb platform_data on the heap
` [PATCH v2 05/27] mfd: bd96801: Allocate watchdog IRQ resource "
` [PATCH v2 06/27] mfd: ti_am335x_tscadc: Retrieve parent driver data via dev_get_drvdata()
` [PATCH v2 07/27] mfd: db8500-prcmu: Make AB8500 cell and IRQ resource static
` [PATCH v2 08/27] mfd: nct6694: Do not resubmit interrupt URB on endpoint stall (-EPIPE)
` [PATCH v2 09/27] mfd: ioc3: Request parent IRQ via request_irq() and free before domain removal
` [PATCH v2 10/27] mfd: intel-lpss: Remove registered MFD child devices on probe failure
` [PATCH v2 11/27] mfd: max8907: Manage power-off handler via devm_register_sys_off_handler()
` [PATCH v2 12/27] mfd: twl-core: Clear pm_power_off callback in twl_remove()
` [PATCH v2 13/27] mfd: twl-core: Clear twl_priv pointer on teardown and probe failure
` [PATCH v2 14/27] mfd: loongson-se: Check return value of dma_set_mask_and_coherent()
` [PATCH v2 15/27] mfd: loongson-se: Zero-initialise controller command structures
` [PATCH v2 16/27] mfd: loongson-se: Reinitialise completions and wait uninterruptibly for commands
` [PATCH v2 17/27] mfd: loongson-se: Zero-allocate driver data and initialise engine completions in probe
` [PATCH v2 18/27] mfd: loongson-se: Prevent out-of-bounds engine access in se_irq_handler()
` [PATCH v2 19/27] mfd: loongson-se: Stop controller and mask interrupts on teardown and shutdown
` [PATCH v2 20/27] mfd: loongson-se: Validate engine ID, DMA buffer size, and IRQ registration
` [PATCH v2 21/27] mfd: abx500-core: Unregister device ops on devm release
` [PATCH v2 22/27] mfd: ab8500-core: Register sysfs attribute groups via devm_device_add_group()
` [PATCH v2 23/27] mfd: tps65217: Manage IRQ domain teardown via devres
` [PATCH v2 24/27] mfd: mt6397: Manage IRQ domain lifecycle with devres
` [PATCH v2 25/27] mfd: mt6397: Unregister PM notifier on probe failure and unbind
` [PATCH v2 27/27] mfd: ti_am335x_tscadc: Remove redundant ti_tscadc_dev_get() helper
[PATCH v5 0/3] Fix poweroff restarting the board on Firefly-RK3399
2026-10-27 9:27 UTC (8+ messages)
` [PATCH v5 1/3] dt-bindings: mfd: rk8xx: add board level power hold GPIOs
` [PATCH v5 2/3] mfd: rk8xx: Release the power hold GPIOs before powering off
` [PATCH v5 3/3] arm64: dts: rockchip: fix power-off on Firefly-RK3399
[PATCH 0/7] sy7636a: power the panel only during updates
2026-10-27 9:18 UTC (13+ messages)
` [PATCH 5/7] regulator: sy7636a: report the temperature
` [PATCH 6/7] regulator: sy7636a: bind to the I2C device directly
[PATCH 00/20] arm64: add Synaptics SL261X SoCs and RDK boards
2026-10-27 9:11 UTC (5+ messages)
` [PATCH 13/20] dt-bindings: pinctrl: berlin: Support Synaptics SL261X SoCs
` [PATCH 19/20] dt-bindings: arm: berlin: Add Synaptics SL261X SoC and RDK board
[PATCH 00/27] rockchip: Add RK3572 and Forlinx OK3572-C support
2026-10-27 8:14 UTC (68+ messages)
` [PATCH 01/27] dt-bindings: clock: rockchip: Add RK3572 CRU
` [PATCH 02/27] dt-bindings: power: rockchip: Add RK3572 power domains
` [PATCH 03/27] dt-bindings: soc: rockchip: Add RK3572 PMU and GRF
` [PATCH 04/27] dt-bindings: mfd: syscon: Add RK3572 QoS register compatible
` [PATCH 05/27] dt-bindings: pinctrl: rockchip: Add RK3572
` [PATCH 06/27] dt-bindings: gpio: rockchip: Add RK3572 GPIO banks
` [PATCH 07/27] clk: rockchip: Add RK3572 clock and reset support
` [PATCH 08/27] pinctrl: rockchip: Add RK3572 support
` [PATCH 09/27] gpio: rockchip: Add RK3572 GPIO support
` [PATCH 10/27] pmdomain: rockchip: Add RK3572 boot peripheral domains
` [PATCH 11/27] dt-bindings: i2c: rk3x: Add RK3572
` [PATCH 12/27] dt-bindings: serial: snps-dw-apb-uart: "
` [PATCH 13/27] dt-bindings: mmc: rockchip: Add RK3572 controllers
` [PATCH 14/27] dt-bindings: net: rockchip-dwmac: Add RK3572
` [PATCH 15/27] dt-bindings: thermal: rockchip: "
` [PATCH 16/27] net: stmmac: dwmac-rk: Add RK3572 support
` [PATCH 17/27] thermal: rockchip: "
` [PATCH 18/27] dt-bindings: phy: rockchip-inno-usb2: Add RK3572
` [PATCH 19/27] dt-bindings: phy: rockchip-naneng-combphy: "
` [PATCH 20/27] dt-bindings: usb: rockchip: Add RK3572 DWC3 controller
` [PATCH 21/27] phy: rockchip-inno-usb2: Add RK3572 support
` [PATCH 22/27] phy: rockchip-naneng-combphy: "
` [PATCH 23/27] usb: dwc3: Configure RK3572 PIPE port before discovery
` [PATCH 24/27] mmc: dw_mmc-rockchip: Keep RK3572 NVM domain powered
` [PATCH 25/27] dt-bindings: arm: rockchip: Add Forlinx OK3572-C
` [PATCH 26/27] arm64: dts: rockchip: Add RK3572 SoC
` [PATCH 27/27] arm64: dts: rockchip: Add initial support for Forlinx OK3572-C
[PATCH 01/28] mfd: nct6694: Allocate USB DMA buffers with kzalloc_obj()
2026-10-27 3:56 UTC (44+ messages)
` [PATCH 02/28] mfd: ls2kbmc: Unregister GPIO GSI via devm_add_action_or_reset()
` [PATCH 03/28] mfd: ls2kbmc: Cancel reset work on teardown via devm_work_autocancel()
` [PATCH 04/28] mfd: ls2kbmc: Allocate simplefb platform_data on the heap
` [PATCH 05/28] mfd: bd96801: Allocate watchdog IRQ resource "
` [PATCH 07/28] mfd: db8500-prcmu: Make AB8500 cell and IRQ resource static
` [PATCH 09/28] mfd: cgbc: Zero-initialise version buffer in cgbc_get_version()
` [PATCH 11/28] mfd: intel-lpss: Remove registered MFD child devices on probe failure
` [PATCH 15/28] mfd: loongson-se: Check return value of dma_set_mask_and_coherent()
` [PATCH 16/28] mfd: loongson-se: Zero-initialise controller command structures
` [PATCH 17/28] mfd: loongson-se: Reinitialise completions and wait uninterruptibly for commands
` [PATCH 18/28] mfd: loongson-se: Zero-allocate driver data and initialise engine completions in probe
` [PATCH 19/28] mfd: loongson-se: Prevent out-of-bounds engine access in se_irq_handler()
` [PATCH 20/28] mfd: loongson-se: Stop controller and mask interrupts on teardown and shutdown
` [PATCH 21/28] mfd: loongson-se: Validate engine ID, DMA buffer size, and IRQ registration
` [PATCH 22/28] mfd: abx500-core: Unregister device ops on devm release
` [PATCH 23/28] mfd: ab8500-core: Register sysfs attribute groups via devm_device_add_group()
` [PATCH 28/28] mfd: ti_am335x_tscadc: Remove redundant ti_tscadc_dev_get() helper
[PATCH] mfd: twl6040: fix IRQ action memory leaks during teardown
2026-10-27 3:37 UTC (2+ messages)
[PATCH] mfd: da9150: fix IRQ action memory leak on removal
2026-10-27 3:08 UTC
[PATCH] mfd: hi655x-pmic: fix IRQ action memory leak on removal
2026-10-27 2:50 UTC (2+ messages)
[PATCH v4 0/4] ARM: s3c: crag6410: Convert to software nodes and properties
2026-10-27 1:07 UTC (12+ messages)
` [PATCH v4 1/4] mfd: wm831x: Support software nodes for DCDC regulators
` [PATCH v4 2/4] ARM: s3c: crag6410: convert PMIC DVS GPIO to software properties
` [PATCH v4 3/4] ARM: s3c: crag6410: convert basic-mmio-gpio and LEDs "
` [PATCH v4 4/4] ARM: s3c: crag6410: convert WM1250 and SPI0 GPIO lookup tables to property entries
[PATCH] mfd: twl4030-irq: Fix a lock leak in twl4030_sih_bus_sync_unlock()
2026-10-26 19:58 UTC (2+ messages)
[PATCH v20 0/8] Add support for NXP P3H2x4x I3C hub driver
2026-10-26 17:14 UTC (5+ messages)
` [PATCH v20 4/8] mfd: p3h2x4x: Add driver for NXP P3H2x4x i3c hub and on-die regulator
[PATCH v3 0/2] mfd/spi: sprd: fix ADI transfer length handling
2026-10-26 15:46 UTC (5+ messages)
` [PATCH v3 1/2] mfd: sprd-sc27xx: Pass byte length to spi_read()
` [PATCH v3 2/2] spi: sprd-adi: enforce the exact transfer length
[PATCH v2 0/7] mfd: qcom-pm8008: Add support for PM8010 over I2C
2026-10-26 14:12 UTC (18+ messages)
` [PATCH v2 3/7] regulator: qcom-pm8008: Add PM8010 mode support
` [PATCH v2 4/7] mfd: qcom-pm8008: Drop GPIO support
` [PATCH v2 5/7] mfd: qcom-pm8008: Add PM8010 support
` [PATCH v2 7/7] mfd: qcom-pm8008: Tolerate missing interrupt
[PATCH v3] mfd: intel-lpss: Set d3hot_delay to 0
2026-10-26 11:40 UTC (4+ messages)
[PATCH 0/7] Add support for the X-Powers AXP2101 PMIC
2026-10-26 9:31 UTC (7+ messages)
` [PATCH 1/7] dt-bindings: mfd: x-powers,axp152: Add the AXP2101
` [PATCH 2/7] mfd: axp20x: Add support for "
[PATCH v4 00/20] drm: starfive: jh7110: Enable display subsystem
2026-10-26 9:13 UTC (4+ messages)
` [PATCH v4 16/20] phy: Add common Innosilicon HDMI PHY helpers
[PATCH] mfd: mxs-lradc: Pass mapped IRQs to child devices
2026-10-24 2:34 UTC (2+ messages)
[PATCH v2 00/53] MIPS: SGI-IP27: add support for the IP35 (Bedrock hub) machines
2026-10-22 21:34 UTC (8+ messages)
[PATCH v2] mfd: intel-lpss: Set d3hot_delay to 0
2026-10-22 10:19 UTC (4+ messages)
[PATCH] mfd: wm8994: Enable runtime PM before registering IRQ chip and children
2026-10-22 8:38 UTC (3+ messages)
[PATCH v5 0/8] Initial support for the Realtek interrupt controller
2026-10-22 6:53 UTC (7+ messages)
` [PATCH v5 3/8] dt-bindings: mfd: realtek,rtd1xxx: Add interrupt controller child node
[PATCH RFC] mfd: intel-lpss: Set d3hot_delay to 0
2026-10-21 17:14 UTC (4+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).