mfd.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
 messages from 2026-11-12 13:58:35 to 2026-11-16 21:26:45 UTC [more...]

[PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR
 2026-11-16 21:26 UTC  (3+ messages)
` [PATCH v2 01/16] dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC
` [PATCH v2 02/16] dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains

[PATCH v2 0/7] pinctrl: airoha: add AN7589 support
 2026-11-16 19:39 UTC  (22+ messages)
` [PATCH v2 1/7] pinctrl: airoha: make gpio register layout per SoC
` [PATCH v2 2/7] pinctrl: airoha: add per pin mode field mux
` [PATCH v2 3/7] pinctrl: airoha: make the chip SCU optional
` [PATCH v2 4/7] pinctrl: airoha: mux a requested GPIO through the IOMUX
` [PATCH v2 5/7] dt-bindings: pinctrl: airoha: add AN7589
` [PATCH v2 6/7] pinctrl: airoha: move the GPIO register offsets to the common header
` [PATCH v2 7/7] pinctrl: airoha: add support of an7589 SoC

[PATCH v2 0/3] mfd: tps65219: Let a board run past the warm threshold
 2026-11-16 19:04 UTC  (7+ messages)
` [PATCH v2 1/3] mfd: tps65219: Correct the MASK_EFFECT field of MASK_CONFIG
` [PATCH v2 2/3] regulator: dt-bindings: ti,tps65219: Add ti,no-warm-shutdown
` [PATCH v2 3/3] mfd: tps65219: Keep running past the warm threshold when asked

[PATCH v3 0/2] rtc: mt6397: provide the RTC's 32 kHz output as a clock
 2026-11-16 18:58 UTC  (5+ messages)
` [PATCH v3 1/2] rtc: mt6397: rename the write trigger register offset
` [PATCH v3 2/2] rtc: mt6397: provide the 32 kHz output as a clock

[PATCH v3 0/9] pinctrl: airoha: add AN7589 support
 2026-11-16 17:59 UTC  (19+ messages)
` [PATCH v3 1/9] pinctrl: airoha: make gpio register layout per SoC
` [PATCH v3 2/9] pinctrl: airoha: add per pin mode field mux
` [PATCH v3 3/9] pinctrl: airoha: make the chip SCU optional
` [PATCH v3 4/9] pinctrl: airoha: mux a requested GPIO through the IOMUX
` [PATCH v3 5/9] dt-bindings: mfd: syscon: add airoha,an7589-iomux
` [PATCH v3 6/9] dt-bindings: pinctrl: airoha: add AN7589
` [PATCH v3 7/9] dt-bindings: mfd: airoha: add AN7589 GPIO system controller
` [PATCH v3 8/9] pinctrl: airoha: move the GPIO register offsets to the common header
` [PATCH v3 9/9] pinctrl: airoha: add support of an7589 SoC

[PATCH v5 0/9] Congatec Board Controller: Add storage devices support
 2026-11-16 16:56 UTC  (7+ messages)
` [PATCH v5 4/9] i2c: cgbc: Use plateform data to get bus ID and adapter name

[PATCH] mfd: Convert to subsys_platform_driver()
 2026-11-16 14:49 UTC  (2+ messages)
` (subset) "

[PATCH 0/2] rtc: mt6397: provide the RTC's 32 kHz output as a clock
 2026-11-16 12:47 UTC  (5+ messages)
` [PATCH 2/2] rtc: mt6397: provide the "

[PATCH v2 0/7] Add support for the X-Powers AXP2101 PMIC
 2026-11-16 12:38 UTC  (6+ messages)
` [PATCH v2 1/7] dt-bindings: mfd: x-powers,axp152: Add the AXP2101
` [PATCH v2 2/7] mfd: axp20x: Add support for "

[PATCH v3 0/2] Add SoundWire detach helper
 2026-11-16 11:29 UTC  (5+ messages)
` [PATCH v3 1/2] soundwire: Add a helper function to indicate a device will detach
` [PATCH v3 2/2] mfd: cs42l43: Move to core detach helper

[PATCH net-next v4 0/8] net: dsa: Add support for SoC-e Ethernet switch IP cores
 2026-11-16 10:34 UTC  (12+ messages)
` [PATCH net-next v4 3/8] dt-bindings: net: dsa: Add SoC-e SWIP switch function
` [PATCH net-next v4 4/8] dt-bindings: mfd: Add SoC-e SWIP parent

[PATCH v2 RESEND 0/2] Add SoundWire detach helper
 2026-11-16 10:07 UTC  (4+ messages)
` [PATCH v2 RESEND 2/2] mfd: cs42l43: Move to core "

[PATCH v10] mfd: loongson-se: Add multi-node support
 2026-11-16 10:01 UTC  (2+ messages)

[PATCH v4 0/7] BCMBCA PMB power, clock, reset and hardware monitoring support
 2026-11-16  9:57 UTC  (6+ messages)
` [PATCH v4 5/7] reset: Add BCMBCA block resets through the PMB
` [PATCH v4 6/7] clk: bcm: Add BCMBCA PMB clocks

[BUG] qcom-spmi-adc-tm5: lockdep reports invalid wait context in IRQ handler
 2026-11-16  7:48 UTC  (2+ messages)

[PATCH v5 0/7] mfd: qcom-pm8008: Add support for PM8010 over I2C
 2026-11-16  7:09 UTC  (15+ messages)
` [PATCH v5 1/7] dt-bindings: mfd: pm8008: Add qcom,pm8010-i2c compatible
` [PATCH v5 2/7] regulator: pm8008: Add PM8010 support
` [PATCH v5 3/7] regulator: pm8008: Add mode voting support for PM8010
` [PATCH v5 4/7] mfd: qcom-pm8008: Drop GPIO support
` [PATCH v5 5/7] mfd: qcom-pm8008: Add PM8010 support
` [PATCH v5 6/7] dt-bindings: mfd: pm8008: Make interrupts optional
` [PATCH v5 7/7] mfd: qcom-pm8008: Tolerate missing interrupt

[PATCH v4 0/7] mfd: qcom-pm8008: Add support for PM8010 over I2C
 2026-11-16  6:10 UTC  (4+ messages)
` [PATCH v4 3/7] regulator: pm8008: Add mode voting support for PM8010

[PATCH] mfd/regulator: db8500-prcmu: Remove EPOD regulators
 2026-11-15 22:32 UTC  (3+ messages)

[PATCH v6 0/3] leds: Add driver for MAX8907 LED cell
 2026-11-15 11:39 UTC  (5+ messages)
` [PATCH v6 1/3] regulator: dt-bindings: maxim,max8907: Document LED support
` [PATCH v6 2/3] leds: Add driver for MAX8907 LED cell
` [PATCH v6 3/3] mfd: max8907: Add "

[PATCH 0/3] mfd: tps65219: Let a board run past the warm threshold
 2026-11-15 11:12 UTC  (9+ messages)
` [PATCH 1/3] mfd: tps65219: Correct the MASK_EFFECT field of MASK_CONFIG
` [PATCH 2/3] regulator: dt-bindings: ti,tps65219: Add ti,no-warm-shutdown
` [PATCH 3/3] mfd: tps65219: Keep running past the warm threshold when asked

[PATCH v5 0/5] mfd: max8907: Schema, pdata and poweroff
 2026-11-15  9:17 UTC  (11+ messages)
` [PATCH v5 1/5] regulator: dt-bindings: maxim,max8907: Convert to DT schema
` [PATCH v5 2/5] mfd: max8907: Remove platform_data based probing
` [PATCH v5 3/5] mfd: max8907: Switch to resource-managed versions of helpers
` [PATCH v5 4/5] mfd: max8907: Convert to use device managed poweroff handler
` [PATCH v5 5/5] mfd: max8907: Add restart handler

[PATCH v7 0/4] mfd: aat2870: Convert to use OF bindings
 2026-11-15  9:13 UTC  (9+ messages)
` [PATCH v7 1/4] dt-bindings: leds: Document Skyworks AAT2870
` [PATCH v7 2/4] backlight: aat2870: Derive brightness steps from max current
` [PATCH v7 3/4] mfd: aat2870: Convert to use OF bindings
` [PATCH v7 4/4] mfd: aat2870: Add support for VIN and IN-LDO power supplies

[PATCH v2 0/4] iio: adc: Add support for MAX8907 ADC cell
 2026-11-15  9:11 UTC  (5+ messages)
` [PATCH v2 1/4] regulator: dt-bindings: maxim,max8907: Document io-channel-cells property
` [PATCH v2 2/4] mfd: max8907: Add ADC client support
` [PATCH v2 3/4] iio: adc: Add support for MAX8907 ADC cell
` [PATCH v2 4/4] mfd: max8907: Add "

[PATCH 00/17] Add initial support for Qualcomm Halliday and Samsung Galaxy XR
 2026-11-14 21:30 UTC  (18+ messages)
` [PATCH 03/17] dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC
` [PATCH 04/17] dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains
` [PATCH 06/17] dt-bindings: arm-smmu: Add Halliday SMMU
` [PATCH 14/17] dt-bindings: interconnect: OSM L3: Add Halliday EPSS L3 compatible
` [PATCH 15/17] dt-bindings: arm: qcom: Add Samsung Galaxy XR
` [PATCH 16/17] arm64: dts: qcom: Add initial Halliday dtsi
` [PATCH 17/17] arm64: dts: qcom: Add Samsung Galaxy XR

[PATCH v3 1/2] dt-bindings: mfd: mxs-lradc: Fix interrupt order
 2026-11-14  2:04 UTC  (6+ messages)
` [PATCH v3 2/2] mfd: mxs-lradc: Pass parent IRQs to child drivers

[PATCH] pwm: lp3943: Mark parent device's platform data as const
 2026-11-13 23:37 UTC  (2+ messages)

[PATCH v2] pwm: lp3943: validate DT output indices in lp3943_pwm_parse_dt()
 2026-11-13 23:20 UTC  (2+ messages)

[PATCH v2 0/2] an8855: add MFD driver
 2026-11-13 20:07 UTC  (3+ messages)
` [PATCH v2 2/2] mfd: an8855: Add support for Airoha AN8855 Switch

[PATCH v6 0/3] Fix poweroff restarting the board on Firefly-RK3399
 2026-11-13 19:30 UTC  (5+ messages)
` [PATCH v6 1/3] dt-bindings: mfd: rk8xx: add board level power hold GPIOs
` [PATCH v6 2/3] mfd: rk8xx: Release the power hold GPIOs before powering off

[PATCH v2 00/27] mfd: Assorted resource lifetime, teardown, and error-handling fixes
 2026-11-13 19:09 UTC  (5+ messages)

[PATCH 1/2] dt-bindings: mfd: mediatek: mt6397: describe the RTC's 32 kHz output
 2026-11-13 18:55 UTC  (3+ messages)
` (subset) "

[PATCH v2 1/1] mfd: stm32-timers: Use dmaengine_desc_set_callback()
 2026-11-13 18:02 UTC  (2+ messages)

[PATCH] dt-bindings: mfd: bq25703a: fix input current limit default
 2026-11-13 15:37 UTC  (2+ messages)
` (subset) "

[PATCH] mfd: macsmc: Hold the lock while reading key info
 2026-11-13 14:55 UTC  (2+ messages)
` (subset) "

[PATCH v2 1/2] mfd: Constify mfd_cell arrays
 2026-11-13 14:35 UTC  (2+ messages)

[PATCH 0/6] mfd: Fix potential cleanup ordering and lifetime bugs
 2026-11-13 14:06 UTC  (4+ messages)
` [PATCH 3/6] mfd: palmas: Fix potential IRQ action leaks on removal
` (subset) [PATCH 0/6] mfd: Fix potential cleanup ordering and lifetime bugs

[PATCH 0/2] arm64: dts: qcom: Add MSM8996 SAW3 compatible
 2026-11-13 14:03 UTC  (11+ messages)
` [PATCH 1/2] dt-bindings: mfd: syscon: Add MSM8996 SAW3 registers
` [PATCH 2/2] arm64: dts: qcom: Add MSM8996 SAW3 syscon compatible

[PATCH net-next 0/3] net: ethernet: ti: am65-cpts: add PTP_SYS_OFFSET_PRECISE support
 2026-11-13 10:44 UTC  (3+ messages)
` [PATCH net-next 1/3] dt-bindings: mfd: syscon: add ti,am654-gtc

[PATCH 00/27] rockchip: Add RK3572 and Forlinx OK3572-C support
 2026-11-13 10:17 UTC  (3+ messages)
` [PATCH 08/27] pinctrl: rockchip: Add RK3572 support

[PATCH v21 0/4] Add support for NXP P3H2x4x I3C hub driver
 2026-11-12 17:14 UTC  (4+ messages)
` [PATCH v21 3/4] i3c: hub: p3h2x4x: Add support for NXP P3H2x4x I3C hub functionality

[PATCH v1 0/7] zorro: add a CS-Lab Warp 1260 MFD
 2026-11-12 15:21 UTC  (5+ messages)
` [PATCH v1 1/7] zorro: warp mfd: add the CS-Lab Warp multifunction parent

[PATCH v2 0/2] Update cs42l43b load detection procedure
 2026-11-12 14:36 UTC  (5+ messages)
` [PATCH v2 1/2] mfd: cs42l43: Add load detection register needed for cs42l43b
` [PATCH v2 2/2] ASoC: cs42l43: Update load detect procedure "

[PATCH 0/2] dt-bindings: pinctrl: Convert ABx500 and Nomadik bindings to schema
 2026-11-12 14:06 UTC  (5+ messages)
` [PATCH 1/2] dt-bindings: pinctrl: abx500: Convert to DT schema
` [PATCH 2/2] dt-bindings: pinctrl: nomadik: "


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).