From: Alexander Wilhelm <alexander.wilhelm@westermo.com>
To: Loic Poulain <loic.poulain@oss.qualcomm.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
mhi@lists.linux.dev, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] bus: mhi: host: fix endianness of BHI vector table
Date: Thu, 15 May 2025 11:46:52 +0200 [thread overview]
Message-ID: <aCW4DCR/IMxejUpg@FUE-ALEWI-WINX> (raw)
In-Reply-To: <CAFEp6-3-25sRUvPbeX0oH1pVyRt49gvdVw5eMi1_azzPdYUjDw@mail.gmail.com>
Am Thu, May 15, 2025 at 11:38:43AM +0200 schrieb Loic Poulain:
> On Thu, May 15, 2025 at 11:26 AM Alexander Wilhelm
> <alexander.wilhelm@westermo.com> wrote:
> >
> > On big endian platforms like PowerPC the DMA address and size are required
> > to be swapped. Otherwise the MHI bus does not start properly. The following
> > example shows the error messages by using qcn9274 wireless radio module
> > with ath12k driver:
> >
> > ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
> > ath12k_pci 0001:01:00.0: MSI vectors: 1
> > ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0
> > ath12k_pci 0001:01:00.0: failed to set mhi state: POWER_ON(2)
> > ath12k_pci 0001:01:00.0: failed to start mhi: -110
> > ath12k_pci 0001:01:00.0: failed to power up :-110
> > ath12k_pci 0001:01:00.0: failed to create soc core: -110
> > ath12k_pci 0001:01:00.0: failed to init core: -110
> > ath12k_pci: probe of 0001:01:00.0 failed with error -110
> >
> > Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
> > ---
> > drivers/bus/mhi/host/boot.c | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/bus/mhi/host/boot.c b/drivers/bus/mhi/host/boot.c
> > index efa3b6dddf4d..205d83ac069f 100644
> > --- a/drivers/bus/mhi/host/boot.c
> > +++ b/drivers/bus/mhi/host/boot.c
> > @@ -31,8 +31,8 @@ int mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
> > int ret;
> >
> > for (i = 0; i < img_info->entries - 1; i++, mhi_buf++, bhi_vec++) {
> > - bhi_vec->dma_addr = mhi_buf->dma_addr;
> > - bhi_vec->size = mhi_buf->len;
> > + bhi_vec->dma_addr = cpu_to_le64(mhi_buf->dma_addr);
> > + bhi_vec->size = cpu_to_le64(mhi_buf->len);
>
> Ok, but then I think the bhi_vec_entry struct should be fixed as well,
> using __le64 fields.
>
> Regards,
> Loic
Sure, I'll fix that. Thank you.
Best regards
Alexander Wilhelm
next prev parent reply other threads:[~2025-05-15 9:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-15 9:25 [PATCH] bus: mhi: host: fix endianness of BHI vector table Alexander Wilhelm
2025-05-15 9:38 ` Loic Poulain
2025-05-15 9:46 ` Alexander Wilhelm [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-05-15 9:31 Alexander Wilhelm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aCW4DCR/IMxejUpg@FUE-ALEWI-WINX \
--to=alexander.wilhelm@westermo.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mhi@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox