From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: mukawa@igel.co.jp, damm@igel.co.jp, dtor@mail.ru, lethal@linux-sh.org
Subject: + sh_keysc-remove-request_mem_region-and-release_mem_region.patch added to -mm tree
Date: Fri, 18 Jul 2008 14:49:50 -0700 [thread overview]
Message-ID: <200807182149.m6ILnoxN032594@imap1.linux-foundation.org> (raw)
The patch titled
sh_keysc: remove request_mem_region() and release_mem_region()
has been added to the -mm tree. Its filename is
sh_keysc-remove-request_mem_region-and-release_mem_region.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: sh_keysc: remove request_mem_region() and release_mem_region()
From: Tetsuya Mukawa <mukawa@igel.co.jp>
Remove request_mem_region() and release_mem_region() from sh_keysc driver.
Those functions can find resource conflict, but it is already checked in
platform_device_add().
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/input/keyboard/sh_keysc.c | 27 +++++++--------------------
1 file changed, 7 insertions(+), 20 deletions(-)
diff -puN drivers/input/keyboard/sh_keysc.c~sh_keysc-remove-request_mem_region-and-release_mem_region drivers/input/keyboard/sh_keysc.c
--- a/drivers/input/keyboard/sh_keysc.c~sh_keysc-remove-request_mem_region-and-release_mem_region
+++ a/drivers/input/keyboard/sh_keysc.c
@@ -158,25 +158,18 @@ static int __devinit sh_keysc_probe(stru
memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata));
pdata = &priv->pdata;
- res = request_mem_region(res->start, res_size(res), pdev->name);
- if (res == NULL) {
- dev_err(&pdev->dev, "failed to request I/O memory\n");
- error = -EBUSY;
- goto err1;
- }
-
priv->iomem_base = ioremap_nocache(res->start, res_size(res));
if (priv->iomem_base == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -ENXIO;
- goto err2;
+ goto err1;
}
priv->input = input_allocate_device();
if (!priv->input) {
dev_err(&pdev->dev, "failed to allocate input device\n");
error = -ENOMEM;
- goto err3;
+ goto err2;
}
input = priv->input;
@@ -194,7 +187,7 @@ static int __devinit sh_keysc_probe(stru
error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
- goto err4;
+ goto err3;
}
for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
@@ -206,7 +199,7 @@ static int __devinit sh_keysc_probe(stru
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev, "failed to register input device\n");
- goto err5;
+ goto err4;
}
iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
@@ -214,14 +207,12 @@ static int __devinit sh_keysc_probe(stru
iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
return 0;
- err5:
- free_irq(irq, pdev);
err4:
- input_free_device(input);
+ free_irq(irq, pdev);
err3:
- iounmap(priv->iomem_base);
+ input_free_device(input);
err2:
- release_mem_region(res->start, res_size(res));
+ iounmap(priv->iomem_base);
err1:
platform_set_drvdata(pdev, NULL);
kfree(priv);
@@ -232,7 +223,6 @@ static int __devinit sh_keysc_probe(stru
static int __devexit sh_keysc_remove(struct platform_device *pdev)
{
struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
- struct resource *res;
iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
@@ -240,9 +230,6 @@ static int __devexit sh_keysc_remove(str
free_irq(platform_get_irq(pdev, 0), pdev);
iounmap(priv->iomem_base);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res_size(res));
reply other threads:[~2008-07-18 21:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200807182149.m6ILnoxN032594@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=damm@igel.co.jp \
--cc=dtor@mail.ru \
--cc=lethal@linux-sh.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=mukawa@igel.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox