From: akpm@linux-foundation.org
To: adurbin@google.com, andi@firstfloor.org, lenb@kernel.org,
mm-commits@vger.kernel.org
Subject: - acpi-add-the-abity-to-reset-the-system-using-reset_reg-in-fadt-table.patch removed from -mm tree
Date: Fri, 18 Jul 2008 16:24:01 -0700 [thread overview]
Message-ID: <200807182324.m6INO1iN004154@imap1.linux-foundation.org> (raw)
The patch titled
acpi: add the abity to reset the system using RESET_REG in FADT table
has been removed from the -mm tree. Its filename was
acpi-add-the-abity-to-reset-the-system-using-reset_reg-in-fadt-table.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: acpi: add the abity to reset the system using RESET_REG in FADT table
From: Aaron Durbin <adurbin@google.com>
Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.
Signed-off-by: Aaron Durbin <adurbin@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/acpi/Makefile | 2 -
drivers/acpi/reboot.c | 50 ++++++++++++++++++++++++++++++++++++++++
include/acpi/reboot.h | 14 ++++++-----
3 files changed, 59 insertions(+), 7 deletions(-)
diff -puN drivers/acpi/Makefile~acpi-add-the-abity-to-reset-the-system-using-reset_reg-in-fadt-table drivers/acpi/Makefile
--- a/drivers/acpi/Makefile~acpi-add-the-abity-to-reset-the-system-using-reset_reg-in-fadt-table
+++ a/drivers/acpi/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_X86) += blacklist.o
#
# ACPI Core Subsystem (Interpreter)
#
-obj-y += osl.o utils.o \
+obj-y += osl.o utils.o reboot.o\
dispatcher/ events/ executer/ hardware/ \
namespace/ parser/ resources/ tables/ \
utilities/
diff -puN /dev/null drivers/acpi/reboot.c
--- /dev/null
+++ a/drivers/acpi/reboot.c
@@ -0,0 +1,50 @@
+
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <acpi/reboot.h>
+
+void acpi_reboot(void)
+{
+ struct acpi_generic_address *rr;
+ struct pci_bus *bus0;
+ u8 reset_value;
+ unsigned int devfn;
+
+ if (acpi_disabled)
+ return;
+
+ rr = &acpi_gbl_FADT.reset_register;
+
+ /* Is the reset register supported? */
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+ rr->bit_width != 8 || rr->bit_offset != 0)
+ return;
+
+ reset_value = acpi_gbl_FADT.reset_value;
+
+ /* The reset register can only exist in I/O, Memory or PCI config space
+ * on a device on bus 0. */
+ switch (rr->space_id) {
+ case ACPI_ADR_SPACE_PCI_CONFIG:
+ /* The reset register can only live on bus 0. */
+ bus0 = pci_find_bus(0, 0);
+ if (!bus0)
+ return;
+ /* Form PCI device/function pair. */
+ devfn = PCI_DEVFN((rr->address >> 32) & 0xffff,
+ (rr->address >> 16) & 0xffff);
+ printk(KERN_DEBUG "Resetting with ACPI PCI RESET_REG.");
+ /* Write the value that resets us. */
+ pci_bus_write_config_byte(bus0, devfn,
+ (rr->address & 0xffff), reset_value);
+ break;
+
+ case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ printk(KERN_DEBUG "ACPI MEMORY or I/O RESET_REG.\n");
+ acpi_hw_low_level_write(8, reset_value, rr);
+ break;
+ }
+ /* Wait ten seconds */
+ acpi_os_stall(10000000);
+}
diff -puN include/acpi/reboot.h~acpi-add-the-abity-to-reset-the-system-using-reset_reg-in-fadt-table include/acpi/reboot.h
--- a/include/acpi/reboot.h~acpi-add-the-abity-to-reset-the-system-using-reset_reg-in-fadt-table
+++ a/include/acpi/reboot.h
@@ -1,9 +1,11 @@
+#ifndef __ACPI_REBOOT_H
+#define __ACPI_REBOOT_H
+
+#ifdef CONFIG_ACPI
+extern void acpi_reboot(void);
+#else
+static inline void acpi_reboot(void) { }
+#endif
-/*
- * Dummy placeholder to make the EFI patches apply to the x86 tree.
- * Andrew/Len, please just kill this file if you encounter it.
- */
-#ifndef acpi_reboot
-# define acpi_reboot() do { } while (0)
#endif
_
Patches currently in -mm which might be from adurbin@google.com are
origin.patch
reply other threads:[~2008-07-18 23:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200807182324.m6INO1iN004154@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=adurbin@google.com \
--cc=andi@firstfloor.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox