From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: adobriyan@gmail.com, abelay@mit.edu, bjorn.helgaas@hp.com
Subject: + pnpbios-convert-to-seq_file.patch added to -mm tree
Date: Wed, 25 Nov 2009 13:11:59 -0800 [thread overview]
Message-ID: <200911252111.nAPLBxJE018209@imap1.linux-foundation.org> (raw)
The patch titled
pnpbios: convert to seq_file
has been added to the -mm tree. Its filename is
pnpbios-convert-to-seq_file.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: pnpbios: convert to seq_file
From: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Adam Belay <abelay@mit.edu>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/pnp/pnpbios/proc.c | 204 ++++++++++++++++++++++-------------
1 file changed, 129 insertions(+), 75 deletions(-)
diff -puN drivers/pnp/pnpbios/proc.c~pnpbios-convert-to-seq_file drivers/pnp/pnpbios/proc.c
--- a/drivers/pnp/pnpbios/proc.c~pnpbios-convert-to-seq_file
+++ a/drivers/pnp/pnpbios/proc.c
@@ -24,6 +24,7 @@
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/pnp.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <asm/uaccess.h>
@@ -33,42 +34,65 @@
static struct proc_dir_entry *proc_pnp = NULL;
static struct proc_dir_entry *proc_pnp_boot = NULL;
-static int proc_read_pnpconfig(char *buf, char **start, off_t pos,
- int count, int *eof, void *data)
+static int pnpconfig_proc_show(struct seq_file *m, void *v)
{
struct pnp_isa_config_struc pnps;
if (pnp_bios_isapnp_config(&pnps))
return -EIO;
- return snprintf(buf, count,
- "structure_revision %d\n"
- "number_of_CSNs %d\n"
- "ISA_read_data_port 0x%x\n",
- pnps.revision, pnps.no_csns, pnps.isa_rd_data_port);
+ seq_printf(m, "structure_revision %d\n"
+ "number_of_CSNs %d\n"
+ "ISA_read_data_port 0x%x\n",
+ pnps.revision, pnps.no_csns, pnps.isa_rd_data_port);
+ return 0;
}
-static int proc_read_escdinfo(char *buf, char **start, off_t pos,
- int count, int *eof, void *data)
+static int pnpconfig_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pnpconfig_proc_show, NULL);
+}
+
+static const struct file_operations pnpconfig_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pnpconfig_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int escd_info_proc_show(struct seq_file *m, void *v)
{
struct escd_info_struc escd;
if (pnp_bios_escd_info(&escd))
return -EIO;
- return snprintf(buf, count,
- "min_ESCD_write_size %d\n"
+ seq_printf(m, "min_ESCD_write_size %d\n"
"ESCD_size %d\n"
"NVRAM_base 0x%x\n",
escd.min_escd_write_size,
escd.escd_size, escd.nv_storage_base);
+ return 0;
}
+static int escd_info_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, escd_info_proc_show, NULL);
+}
+
+static const struct file_operations escd_info_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = escd_info_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
#define MAX_SANE_ESCD_SIZE (32*1024)
-static int proc_read_escd(char *buf, char **start, off_t pos,
- int count, int *eof, void *data)
+static int escd_proc_show(struct seq_file *m, void *v)
{
struct escd_info_struc escd;
char *tmpbuf;
- int escd_size, escd_left_to_read, n;
+ int escd_size;
if (pnp_bios_escd_info(&escd))
return -EIO;
@@ -76,7 +100,7 @@ static int proc_read_escd(char *buf, cha
/* sanity check */
if (escd.escd_size > MAX_SANE_ESCD_SIZE) {
printk(KERN_ERR
- "PnPBIOS: proc_read_escd: ESCD size reported by BIOS escd_info call is too great\n");
+ "PnPBIOS: %s: ESCD size reported by BIOS escd_info call is too great\n", __func__);
return -EFBIG;
}
@@ -94,56 +118,75 @@ static int proc_read_escd(char *buf, cha
/* sanity check */
if (escd_size > MAX_SANE_ESCD_SIZE) {
- printk(KERN_ERR "PnPBIOS: proc_read_escd: ESCD size reported by"
- " BIOS read_escd call is too great\n");
+ printk(KERN_ERR "PnPBIOS: %s: ESCD size reported by"
+ " BIOS read_escd call is too great\n", __func__);
kfree(tmpbuf);
return -EFBIG;
}
- escd_left_to_read = escd_size - pos;
- if (escd_left_to_read < 0)
- escd_left_to_read = 0;
- if (escd_left_to_read == 0)
- *eof = 1;
- n = min(count, escd_left_to_read);
- memcpy(buf, tmpbuf + pos, n);
+ seq_write(m, tmpbuf, escd_size);
kfree(tmpbuf);
- *start = buf;
- return n;
+ return 0;
}
-static int proc_read_legacyres(char *buf, char **start, off_t pos,
- int count, int *eof, void *data)
+static int escd_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, escd_proc_show, NULL);
+}
+
+static const struct file_operations escd_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = escd_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pnp_legacyres_proc_show(struct seq_file *m, void *v)
{
- /* Assume that the following won't overflow the buffer */
- if (pnp_bios_get_stat_res(buf))
+ void *buf;
+
+ buf = kmalloc(65536, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ if (pnp_bios_get_stat_res(buf)) {
+ kfree(buf);
return -EIO;
+ }
+
+ seq_write(m, buf, 65536);
+ kfree(buf);
+ return 0;
+}
- return count; // FIXME: Return actual length
+static int pnp_legacyres_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pnp_legacyres_proc_show, NULL);
}
-static int proc_read_devices(char *buf, char **start, off_t pos,
- int count, int *eof, void *data)
+static const struct file_operations pnp_legacyres_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pnp_legacyres_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pnp_devices_proc_show(struct seq_file *m, void *v)
{
struct pnp_bios_node *node;
u8 nodenum;
- char *p = buf;
-
- if (pos >= 0xff)
- return 0;
node = kzalloc(node_info.max_node_size, GFP_KERNEL);
if (!node)
return -ENOMEM;
- for (nodenum = pos; nodenum < 0xff;) {
+ for (nodenum = 0; nodenum < 0xff;) {
u8 thisnodenum = nodenum;
- /* 26 = the number of characters per line sprintf'ed */
- if ((p - buf + 26) > count)
- break;
+
if (pnp_bios_get_dev_node(&nodenum, PNPMODE_DYNAMIC, node))
break;
- p += sprintf(p, "%02x\t%08x\t%02x:%02x:%02x\t%04x\n",
+ seq_printf(m, "%02x\t%08x\t%02x:%02x:%02x\t%04x\n",
node->handle, node->eisa_id,
node->type_code[0], node->type_code[1],
node->type_code[2], node->flags);
@@ -153,20 +196,29 @@ static int proc_read_devices(char *buf,
"PnPBIOS: proc_read_devices:",
(unsigned int)nodenum,
(unsigned int)thisnodenum);
- *eof = 1;
break;
}
}
kfree(node);
- if (nodenum == 0xff)
- *eof = 1;
- *start = (char *)((off_t) nodenum - pos);
- return p - buf;
+ return 0;
+}
+
+static int pnp_devices_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pnp_devices_proc_show, NULL);
}
-static int proc_read_node(char *buf, char **start, off_t pos,
- int count, int *eof, void *data)
+static const struct file_operations pnp_devices_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pnp_devices_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pnpbios_proc_show(struct seq_file *m, void *v)
{
+ void *data = m->private;
struct pnp_bios_node *node;
int boot = (long)data >> 8;
u8 nodenum = (long)data;
@@ -180,14 +232,20 @@ static int proc_read_node(char *buf, cha
return -EIO;
}
len = node->size - sizeof(struct pnp_bios_node);
- memcpy(buf, node->data, len);
+ seq_write(m, node->data, len);
kfree(node);
- return len;
+ return 0;
+}
+
+static int pnpbios_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pnpbios_proc_show, PDE(inode)->data);
}
-static int proc_write_node(struct file *file, const char __user * buf,
- unsigned long count, void *data)
+static ssize_t pnpbios_proc_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *pos)
{
+ void *data = PDE(file->f_path.dentry->d_inode)->data;
struct pnp_bios_node *node;
int boot = (long)data >> 8;
u8 nodenum = (long)data;
@@ -218,34 +276,33 @@ out:
return ret;
}
+static const struct file_operations pnpbios_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pnpbios_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = pnpbios_proc_write,
+};
+
int pnpbios_interface_attach_device(struct pnp_bios_node *node)
{
char name[3];
- struct proc_dir_entry *ent;
sprintf(name, "%02x", node->handle);
if (!proc_pnp)
return -EIO;
if (!pnpbios_dont_use_current_config) {
- ent = create_proc_entry(name, 0, proc_pnp);
- if (ent) {
- ent->read_proc = proc_read_node;
- ent->write_proc = proc_write_node;
- ent->data = (void *)(long)(node->handle);
- }
+ proc_create_data(name, 0644, proc_pnp, &pnpbios_proc_fops,
+ (void *)(long)(node->handle));
}
if (!proc_pnp_boot)
return -EIO;
- ent = create_proc_entry(name, 0, proc_pnp_boot);
- if (ent) {
- ent->read_proc = proc_read_node;
- ent->write_proc = proc_write_node;
- ent->data = (void *)(long)(node->handle + 0x100);
+ if (proc_create_data(name, 0644, proc_pnp_boot, &pnpbios_proc_fops,
+ (void *)(long)(node->handle + 0x100)))
return 0;
- }
-
return -EIO;
}
@@ -262,14 +319,11 @@ int __init pnpbios_proc_init(void)
proc_pnp_boot = proc_mkdir("boot", proc_pnp);
if (!proc_pnp_boot)
return -EIO;
- create_proc_read_entry("devices", 0, proc_pnp, proc_read_devices, NULL);
- create_proc_read_entry("configuration_info", 0, proc_pnp,
- proc_read_pnpconfig, NULL);
- create_proc_read_entry("escd_info", 0, proc_pnp, proc_read_escdinfo,
- NULL);
- create_proc_read_entry("escd", S_IRUSR, proc_pnp, proc_read_escd, NULL);
- create_proc_read_entry("legacy_device_resources", 0, proc_pnp,
- proc_read_legacyres, NULL);
+ proc_create("devices", 0, proc_pnp, &pnp_devices_proc_fops);
+ proc_create("configuration_info", 0, proc_pnp, &pnpconfig_proc_fops);
+ proc_create("escd_info", 0, proc_pnp, &escd_info_proc_fops);
+ proc_create("escd", S_IRUSR, proc_pnp, &escd_proc_fops);
+ proc_create("legacy_device_resources", 0, proc_pnp, &pnp_legacyres_proc_fops);
return 0;
}
_
Patches currently in -mm which might be from adobriyan@gmail.com are
linux-next.patch
proc_fops-convert-av7110.patch
proc_fops-convert-cpia.patch
genirq-switch-proc-irq-spurious-to-seq_file.patch
proc_fops-convert-drivers-isdn-to-seq_file.patch
proc_fops-convert-drivers-isdn-to-seq_file-fix.patch
const-constify-remaining-dev_pm_ops.patch
uml-irq-register-race-condition.patch
make-debug_bugverbose-default-to-y.patch
proc-rename-de_get-to-pde_get-and-inline-it.patch
const-constify-remaining-pipe_buf_operations.patch
ufs-pass-qstr-instead-of-dentry-where-necessary-for-nfs.patch
ufs-nfs-support.patch
reiserfs-remove-proc-fs-reiserfs-version.patch
reiserfs-dont-compile-procfso-at-all-if-no-support.patch
mpt-fusion-convert-to-seq_file.patch
ray_cs-convert-to-proc_fops.patch
ipw2x00-convert-to-seq_file.patch
thinkpad_acpi-convert-to-seq_file.patch
asus_acpi-convert-to-seq_file.patch
toshiba_acpi-convert-to-seq_file.patch
pnpbios-convert-to-seq_file.patch
reply other threads:[~2009-11-25 21:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200911252111.nAPLBxJE018209@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=abelay@mit.edu \
--cc=adobriyan@gmail.com \
--cc=bjorn.helgaas@hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox