Linux MM tree latest commits
 help / color / mirror / Atom feed
From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: pugs@cisco.com, chrisw@sous-sol.org, dwmw2@infradead.org,
	fenghua.yu@intel.com, jbarnes@virtuousgeek.org,
	joerg.roedel@amd.com
Subject: + drivers-pci-intel-iommuc-errors-with-smaller-iommu-widths.patch added to -mm tree
Date: Fri, 30 Apr 2010 15:27:27 -0700	[thread overview]
Message-ID: <201004302227.o3UMRRWD017361@imap1.linux-foundation.org> (raw)


The patch titled
     drivers/pci/intel-iommu.c: errors with smaller iommu widths
has been added to the -mm tree.  Its filename is
     drivers-pci-intel-iommuc-errors-with-smaller-iommu-widths.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: drivers/pci/intel-iommu.c: errors with smaller iommu widths
From: "Tom Lyon" <pugs@cisco.com>

When using iommu_domain_alloc with the Intel iommu, the domain address
width is always initialized to 48 bits (agaw 2).  This domain->agaw value
is then used by pfn_to_dma_pte to (always) build a 4 level page table. 
However, not all systems support iommu width of 48 or 4 level page tables.
In particular, the Core i5-660 and i5-670 support an address width of 36
bits (not 39!), an agaw of only 1, and only 3 level page tables.

This version of the patch simply lops off extra levels of the page tables
if the agaw value of the iommu is less than what is currently allocated
for the domain (in intel_iommu_attach_device).  If there were already
allocated addresses above what the new iommu can handle, EFAULT is
returned.

Signed-off-by: Tom Lyon <pugs@cisco.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/pci/intel-iommu.c |   40 ++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 19 deletions(-)

diff -puN drivers/pci/intel-iommu.c~drivers-pci-intel-iommuc-errors-with-smaller-iommu-widths drivers/pci/intel-iommu.c
--- a/drivers/pci/intel-iommu.c~drivers-pci-intel-iommuc-errors-with-smaller-iommu-widths
+++ a/drivers/pci/intel-iommu.c
@@ -3433,19 +3433,6 @@ static void vm_domain_remove_all_dev_inf
 /* domain id for virtual machine, it won't be set in context */
 static unsigned long vm_domid;
 
-static int vm_domain_min_agaw(struct dmar_domain *domain)
-{
-	int i;
-	int min_agaw = domain->agaw;
-
-	for_each_set_bit(i, &domain->iommu_bmp, g_num_of_iommus) {
-		if (min_agaw > g_iommus[i]->agaw)
-			min_agaw = g_iommus[i]->agaw;
-	}
-
-	return min_agaw;
-}
-
 static struct dmar_domain *iommu_alloc_vm_domain(void)
 {
 	struct dmar_domain *domain;
@@ -3574,7 +3561,6 @@ static int intel_iommu_attach_device(str
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct intel_iommu *iommu;
 	int addr_width;
-	u64 end;
 
 	/* normally pdev is not mapped */
 	if (unlikely(domain_context_mapped(pdev))) {
@@ -3597,14 +3583,30 @@ static int intel_iommu_attach_device(str
 
 	/* check if this iommu agaw is sufficient for max mapped address */
 	addr_width = agaw_to_width(iommu->agaw);
-	end = DOMAIN_MAX_ADDR(addr_width);
-	end = end & VTD_PAGE_MASK;
-	if (end < dmar_domain->max_addr) {
-		printk(KERN_ERR "%s: iommu agaw (%d) is not "
+	if (addr_width > cap_mgaw(iommu->cap))
+		addr_width = cap_mgaw(iommu->cap);
+
+	if (dmar_domain->max_addr > (1LL << addr_width)) {
+		printk(KERN_ERR "%s: iommu width (%d) is not "
 		       "sufficient for the mapped address (%llx)\n",
-		       __func__, iommu->agaw, dmar_domain->max_addr);
+		       __func__, addr_width, dmar_domain->max_addr);
 		return -EFAULT;
 	}
+	dmar_domain->gaw = addr_width;
+
+	/*
+	 * Knock out extra levels of page tables if necessary
+	 */
+	while (iommu->agaw < dmar_domain->agaw) {
+		struct dma_pte *pte;
+
+		pte = dmar_domain->pgd;
+		if (dma_pte_present(pte)) {
+			free_pgtable_page(dmar_domain->pgd);
+			dmar_domain->pgd = (struct dma_pte *)dma_pte_addr(pte);
+		}
+		dmar_domain->agaw--;
+	}
 
 	return domain_add_dev_info(dmar_domain, pdev, CONTEXT_TT_MULTI_LEVEL);
 }
_

Patches currently in -mm which might be from pugs@cisco.com are

drivers-pci-intel-iommuc-intel_iommu_map_range-failed-at-very-end-of-address-space.patch
drivers-pci-intel-iommuc-errors-with-smaller-iommu-widths.patch


             reply	other threads:[~2010-04-30 22:28 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-30 22:27 akpm [this message]
  -- strict thread matches above, loose matches on Subject: below --
2010-04-19 22:44 + drivers-pci-intel-iommuc-errors-with-smaller-iommu-widths.patch added to -mm tree akpm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201004302227.o3UMRRWD017361@imap1.linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=chrisw@sous-sol.org \
    --cc=dwmw2@infradead.org \
    --cc=fenghua.yu@intel.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=joerg.roedel@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mm-commits@vger.kernel.org \
    --cc=pugs@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox