From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: avorontsov@mvista.com, djiang@mvista.com,
dougthompson@xmission.com, galak@kernel.crashing.org,
ptyser@xes-inc.com
Subject: + edac-mpc85xx-fix-coldplug-hotplug-module-autoloading.patch added to -mm tree
Date: Wed, 21 Jul 2010 15:42:27 -0700 [thread overview]
Message-ID: <201007212242.o6LMgR86019273@imap1.linux-foundation.org> (raw)
The patch titled
edac: mpc85xx: fix coldplug/hotplug module autoloading
has been added to the -mm tree. Its filename is
edac-mpc85xx-fix-coldplug-hotplug-module-autoloading.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: edac: mpc85xx: fix coldplug/hotplug module autoloading
From: Anton Vorontsov <avorontsov@mvista.com>
MPC85xx EDAC driver is missing module device aliases, so the driver won't
load automatically on boot. This patch fixes the issue by adding proper
MODULE_DEVICE_TABLE() macros.
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/edac/mpc85xx_edac.c | 3 +++
1 file changed, 3 insertions(+)
diff -puN drivers/edac/mpc85xx_edac.c~edac-mpc85xx-fix-coldplug-hotplug-module-autoloading drivers/edac/mpc85xx_edac.c
--- a/drivers/edac/mpc85xx_edac.c~edac-mpc85xx-fix-coldplug-hotplug-module-autoloading
+++ a/drivers/edac/mpc85xx_edac.c
@@ -336,6 +336,7 @@ static struct of_device_id mpc85xx_pci_e
},
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_pci_err_of_match);
static struct of_platform_driver mpc85xx_pci_err_driver = {
.probe = mpc85xx_pci_err_probe,
@@ -654,6 +655,7 @@ static struct of_device_id mpc85xx_l2_er
{ .compatible = "fsl,p4080-l2-cache-controller", },
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match);
static struct of_platform_driver mpc85xx_l2_err_driver = {
.probe = mpc85xx_l2_err_probe,
@@ -1133,6 +1135,7 @@ static struct of_device_id mpc85xx_mc_er
{ .compatible = "fsl,p4080-memory-controller", },
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
static struct of_platform_driver mpc85xx_mc_err_driver = {
.probe = mpc85xx_mc_err_probe,
_
Patches currently in -mm which might be from avorontsov@mvista.com are
origin.patch
edac-mpc85xx-add-support-for-new-mpcxxx-pxxxx-edac-controllers.patch
edac-mpc85xx-fix-coldplug-hotplug-module-autoloading.patch
linux-next.patch
sdhci-pltfm-switch-to-module-device-table-matching.patch
sdhci-pltfm-reorganize-makefile-entries-to-support-soc-devices.patch
sdhci-pltfm-add-support-for-cns3xxx-soc-devices.patch
sdhci-s3c-add-support-for-the-non-standard-minimal-clock-value.patch
sdhci-turn-timeout-timer-into-delayed-work.patch
sdhci-use-work-structs-instead-of-tasklets.patch
sdhci-clear-interrupt-status-register-just-once.patch
sdhci-use-threaded-irq-handler.patch
sdhci-turn-host-lock-into-a-mutex.patch
sdhci-get-rid-of-card-detect-work.patch
sdhci-get-rid-of-mdelays-where-it-is-safe-and-makes-sense.patch
sdhci-use-jiffies-instead-of-a-timeout-counter.patch
reply other threads:[~2010-07-21 22:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201007212242.o6LMgR86019273@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=avorontsov@mvista.com \
--cc=djiang@mvista.com \
--cc=dougthompson@xmission.com \
--cc=galak@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=ptyser@xes-inc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox