From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: hdegoede@redhat.com, James.Bottomley@HansenPartnership.com,
greg@kroah.com, mdharm-usb@one-eyed-alien.net,
stern@rowland.harvard.edu
Subject: + usb-storage-add-new-no_read_capacity_16-quirk.patch added to -mm tree
Date: Mon, 26 Jul 2010 14:41:30 -0700 [thread overview]
Message-ID: <201007262141.o6QLfU5e011386@imap1.linux-foundation.org> (raw)
The patch titled
usb-storage: add new no_read_capacity_16 quirk
has been added to the -mm tree. Its filename is
usb-storage-add-new-no_read_capacity_16-quirk.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: usb-storage: add new no_read_capacity_16 quirk
From: Hans de Goede <hdegoede@redhat.com>
Some Rockbox based mp4 players will crash when ever they see a
read_capacity_16 scsi command. So add a new US_FL which tells the scsi sd
driver to not issue any read_capacity_16 scsi commands.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/usb/storage/scsiglue.c | 4 ++++
drivers/usb/storage/unusual_devs.h | 3 ++-
include/linux/usb_usual.h | 4 +++-
3 files changed, 9 insertions(+), 2 deletions(-)
diff -puN drivers/usb/storage/scsiglue.c~usb-storage-add-new-no_read_capacity_16-quirk drivers/usb/storage/scsiglue.c
--- a/drivers/usb/storage/scsiglue.c~usb-storage-add-new-no_read_capacity_16-quirk
+++ a/drivers/usb/storage/scsiglue.c
@@ -209,6 +209,10 @@ static int slave_configure(struct scsi_d
if (us->fflags & US_FL_CAPACITY_HEURISTICS)
sdev->guess_capacity = 1;
+ /* Some devices cannot handle READ_CAPACITY_16 */
+ if (us->fflags & US_FL_NO_READ_CAPACITY_16)
+ sdev->no_read_capacity_16 = 1;
+
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
diff -puN drivers/usb/storage/unusual_devs.h~usb-storage-add-new-no_read_capacity_16-quirk drivers/usb/storage/unusual_devs.h
--- a/drivers/usb/storage/unusual_devs.h~usb-storage-add-new-no_read_capacity_16-quirk
+++ a/drivers/usb/storage/unusual_devs.h
@@ -877,7 +877,8 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x
"RockChip",
"MP3",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+ US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 |
+ US_FL_NO_READ_CAPACITY_16),
/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
* Support the following product :
diff -puN include/linux/usb_usual.h~usb-storage-add-new-no_read_capacity_16-quirk include/linux/usb_usual.h
--- a/include/linux/usb_usual.h~usb-storage-add-new-no_read_capacity_16-quirk
+++ a/include/linux/usb_usual.h
@@ -60,7 +60,9 @@
US_FLAG(BAD_SENSE, 0x00020000) \
/* Bad Sense (never more than 18 bytes) */ \
US_FLAG(NO_READ_DISC_INFO, 0x00040000) \
- /* cannot handle READ_DISC_INFO */
+ /* cannot handle READ_DISC_INFO */ \
+ US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \
+ /* cannot handle READ_CAPACITY_16 */
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
_
Patches currently in -mm which might be from hdegoede@redhat.com are
linux-next.patch
scsi-sr-add-no_read_disc_info-scsi_device-flag.patch
usb-storage-add-new-no_read_disc_info-quirk.patch
scsi-sd-add-a-no_read_capacity_16-scsi_device-flag.patch
usb-storage-add-new-no_read_capacity_16-quirk.patch
hwmon-driver-for-smm665-six-channel-active-dc-output-controller-monitor.patch
hwmon-smm665-driver-documentation.patch
hwmon-update-maintainers-for-smm665-driver.patch
hwmon-add-support-for-jedec-jc-424-compliant-temperature-sensors.patch
hwmon-add-support-for-jedec-jc-424-compliant-temperature-sensors-v3.patch
reply other threads:[~2010-07-26 21:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201007262141.o6QLfU5e011386@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=greg@kroah.com \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mdharm-usb@one-eyed-alien.net \
--cc=mm-commits@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox