From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: lkundrak@v3.sk, hch@lst.de, viro@ZenIV.linux.org.uk
Subject: + fs-sysv-superc-add-support-for-non-pdp11-v7-filesystems.patch added to -mm tree
Date: Mon, 26 Jul 2010 17:29:28 -0700 [thread overview]
Message-ID: <201007270029.o6R0TYQ0018573@imap1.linux-foundation.org> (raw)
The patch titled
fs/sysv/super.c: add support for non-PDP11 v7 filesystems
has been added to the -mm tree. Its filename is
fs-sysv-superc-add-support-for-non-pdp11-v7-filesystems.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: fs/sysv/super.c: add support for non-PDP11 v7 filesystems
From: Lubomir Rintel <lkundrak@v3.sk>
This adds byte order autodetection (of PDP-11 and LE filesystems). No
attempt is made to detect big-endian filesystems -- were there any?
Tested with PDP-11 v7 filesystems and PC-IX maintenance floppy.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/sysv/super.c | 74 +++++++++++++++++++++++++++++++---------------
1 file changed, 50 insertions(+), 24 deletions(-)
diff -puN fs/sysv/super.c~fs-sysv-superc-add-support-for-non-pdp11-v7-filesystems fs/sysv/super.c
--- a/fs/sysv/super.c~fs-sysv-superc-add-support-for-non-pdp11-v7-filesystems
+++ a/fs/sysv/super.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/buffer_head.h>
+#include <linux/parser.h>
#include "sysv.h"
/*
@@ -434,12 +435,46 @@ Ebadsize:
goto failed;
}
-static int v7_fill_super(struct super_block *sb, void *data, int silent)
+static int v7_sanity_check(struct super_block *sb, struct buffer_head *bh)
{
- struct sysv_sb_info *sbi;
- struct buffer_head *bh, *bh2 = NULL;
struct v7_super_block *v7sb;
struct sysv_inode *v7i;
+ struct buffer_head *bh2;
+ struct sysv_sb_info *sbi;
+
+ sbi = sb->s_fs_info;
+
+ /* plausibility check on superblock */
+ v7sb = (struct v7_super_block *) bh->b_data;
+ if (fs16_to_cpu(sbi, v7sb->s_nfree) > V7_NICFREE ||
+ fs16_to_cpu(sbi, v7sb->s_ninode) > V7_NICINOD ||
+ fs32_to_cpu(sbi, v7sb->s_fsize) > V7_MAXSIZE)
+ return 0;
+
+ /* plausibility check on root inode: it is a directory,
+ with a nonzero size that is a multiple of 16 */
+ if ((bh2 = sb_bread(sb, 2)) == NULL) {
+ return 0;
+ }
+
+ v7i = (struct sysv_inode *)(bh2->b_data + 64);
+ if ((fs16_to_cpu(sbi, v7i->i_mode) & ~0777) != S_IFDIR ||
+ (fs32_to_cpu(sbi, v7i->i_size) == 0) ||
+ (fs32_to_cpu(sbi, v7i->i_size) & 017) ||
+ (fs32_to_cpu(sbi, v7i->i_size) > V7_NFILES *
+ sizeof (struct sysv_dir_entry))) {
+ brelse(bh2);
+ return 0;
+ }
+
+ brelse(bh2);
+ return 1;
+}
+
+static int v7_fill_super(struct super_block *sb, void *data, int silent)
+{
+ struct sysv_sb_info *sbi;
+ struct buffer_head *bh;
if (440 != sizeof (struct v7_super_block))
panic("V7 FS: bad super-block size");
@@ -453,7 +488,6 @@ static int v7_fill_super(struct super_bl
sbi->s_sb = sb;
sbi->s_block_base = 0;
sbi->s_type = FSTYPE_V7;
- sbi->s_bytesex = BYTESEX_PDP;
sb->s_fs_info = sbi;
sb_set_blocksize(sb, 512);
@@ -465,34 +499,26 @@ static int v7_fill_super(struct super_bl
goto failed;
}
- /* plausibility check on superblock */
- v7sb = (struct v7_super_block *) bh->b_data;
- if (fs16_to_cpu(sbi, v7sb->s_nfree) > V7_NICFREE ||
- fs16_to_cpu(sbi, v7sb->s_ninode) > V7_NICINOD ||
- fs32_to_cpu(sbi, v7sb->s_fsize) > V7_MAXSIZE)
- goto failed;
+ /* Try PDP-11 UNIX */
+ sbi->s_bytesex = BYTESEX_PDP;
+ if (v7_sanity_check (sb, bh))
+ goto detected;
- /* plausibility check on root inode: it is a directory,
- with a nonzero size that is a multiple of 16 */
- if ((bh2 = sb_bread(sb, 2)) == NULL)
- goto failed;
- v7i = (struct sysv_inode *)(bh2->b_data + 64);
- if ((fs16_to_cpu(sbi, v7i->i_mode) & ~0777) != S_IFDIR ||
- (fs32_to_cpu(sbi, v7i->i_size) == 0) ||
- (fs32_to_cpu(sbi, v7i->i_size) & 017) ||
- (fs32_to_cpu(sbi, v7i->i_size) > V7_NFILES *
- sizeof(struct sysv_dir_entry)))
- goto failed;
- brelse(bh2);
- bh2 = NULL;
+ /* Try PC/IX, v7/x86 */
+ sbi->s_bytesex = BYTESEX_LE;
+ if (v7_sanity_check (sb, bh))
+ goto detected;
+ goto failed;
+
+detected:
sbi->s_bh1 = bh;
sbi->s_bh2 = bh;
if (complete_read_super(sb, silent, 1))
return 0;
failed:
- brelse(bh2);
+ printk("VFS: could not find a valid V7 on %s.\n", sb->s_id);
brelse(bh);
kfree(sbi);
return -EINVAL;
_
Patches currently in -mm which might be from lkundrak@v3.sk are
fs-sysv-add-v7-alias.patch
fs-sysv-v7-adjust-sanity-checks-for-some-volumes.patch
fs-sysv-v7-adjust-sanity-checks-for-some-volumes-checkpatch-fixes.patch
fs-sysv-superc-add-support-for-non-pdp11-v7-filesystems.patch
fs-sysv-superc-add-support-for-non-pdp11-v7-filesystems-checkpatch-fixes.patch
reply other threads:[~2010-07-27 0:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201007270029.o6R0TYQ0018573@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=lkundrak@v3.sk \
--cc=mm-commits@vger.kernel.org \
--cc=viro@ZenIV.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox