From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: alexandre.bounine@idt.com, galak@kernel.crashing.org,
leoli@freescale.com, micha@neli.hopto.org,
mporter@kernel.crashing.org, thomas.moll@sysgo.com
Subject: + rapidio-powerpc-85xx-modify-rio-port-write-interrupt-handler.patch added to -mm tree
Date: Tue, 14 Sep 2010 15:21:15 -0700 [thread overview]
Message-ID: <201009142221.o8EMLF28021790@imap1.linux-foundation.org> (raw)
The patch titled
rapidio:powerpc/85xx: modify RIO port-write interrupt handler
has been added to the -mm tree. Its filename is
rapidio-powerpc-85xx-modify-rio-port-write-interrupt-handler.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: rapidio:powerpc/85xx: modify RIO port-write interrupt handler
From: Alexandre Bounine <alexandre.bounine@idt.com>
- Rearrange RIO port-write interrupt handling to perform message
buffering as soon as possible.
- Modify to disable port-write controller when clearing Transaction
Error (TE) bit.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/powerpc/sysdev/fsl_rio.c | 68 ++++++++++++++++++--------------
1 file changed, 39 insertions(+), 29 deletions(-)
diff -puN arch/powerpc/sysdev/fsl_rio.c~rapidio-powerpc-85xx-modify-rio-port-write-interrupt-handler arch/powerpc/sysdev/fsl_rio.c
--- a/arch/powerpc/sysdev/fsl_rio.c~rapidio-powerpc-85xx-modify-rio-port-write-interrupt-handler
+++ a/arch/powerpc/sysdev/fsl_rio.c
@@ -87,6 +87,9 @@
#define RIO_IPWSR_PWD 0x00000008
#define RIO_IPWSR_PWB 0x00000004
+#define RIO_EPWISR_PINT 0x80000000
+#define RIO_EPWISR_PW 0x00000001
+
#define RIO_MSG_DESC_SIZE 32
#define RIO_MSG_BUFFER_SIZE 4096
#define RIO_MIN_TX_RING_SIZE 2
@@ -1067,18 +1070,12 @@ fsl_rio_port_write_handler(int irq, void
struct rio_priv *priv = port->priv;
u32 epwisr, tmp;
- ipwmr = in_be32(&priv->msg_regs->pwmr);
- ipwsr = in_be32(&priv->msg_regs->pwsr);
-
epwisr = in_be32(priv->regs_win + RIO_EPWISR);
- if (epwisr & 0x80000000) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_info("RIO_LTLEDCSR = 0x%x\n", tmp);
- out_be32(priv->regs_win + RIO_LTLEDCSR, 0);
- }
+ if (!(epwisr & RIO_EPWISR_PW))
+ goto pw_done;
- if (!(epwisr & 0x00000001))
- return IRQ_HANDLED;
+ ipwmr = in_be32(&priv->msg_regs->pwmr);
+ ipwsr = in_be32(&priv->msg_regs->pwsr);
#ifdef DEBUG_PW
pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
@@ -1094,20 +1091,6 @@ fsl_rio_port_write_handler(int irq, void
pr_debug(" PWB");
pr_debug(" )\n");
#endif
- out_be32(&priv->msg_regs->pwsr,
- ipwsr & (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
-
- if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
- priv->port_write_msg.err_count++;
- pr_info("RIO: Port-Write Transaction Err (%d)\n",
- priv->port_write_msg.err_count);
- }
- if (ipwsr & RIO_IPWSR_PWD) {
- priv->port_write_msg.discard_count++;
- pr_info("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- }
-
/* Schedule deferred processing if PW was received */
if (ipwsr & RIO_IPWSR_QFI) {
/* Save PW message (if there is room in FIFO),
@@ -1119,16 +1102,43 @@ fsl_rio_port_write_handler(int irq, void
RIO_PW_MSG_SIZE);
} else {
priv->port_write_msg.discard_count++;
- pr_info("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
+ pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
priv->port_write_msg.discard_count);
}
+ /* Clear interrupt and issue Clear Queue command. This allows
+ * another port-write to be received.
+ */
+ out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_QFI);
+ out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+
schedule_work(&priv->pw_work);
}
- /* Issue Clear Queue command. This allows another
- * port-write to be received.
- */
- out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+ if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
+ priv->port_write_msg.err_count++;
+ pr_debug("RIO: Port-Write Transaction Err (%d)\n",
+ priv->port_write_msg.err_count);
+ /* Clear Transaction Error: port-write controller should be
+ * disabled when clearing this error
+ */
+ out_be32(&priv->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
+ out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_TE);
+ out_be32(&priv->msg_regs->pwmr, ipwmr);
+ }
+
+ if (ipwsr & RIO_IPWSR_PWD) {
+ priv->port_write_msg.discard_count++;
+ pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
+ priv->port_write_msg.discard_count);
+ out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_PWD);
+ }
+
+pw_done:
+ if (epwisr & RIO_EPWISR_PINT) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ out_be32(priv->regs_win + RIO_LTLEDCSR, 0);
+ }
return IRQ_HANDLED;
}
_
Patches currently in -mm which might be from alexandre.bounine@idt.com are
rapidio-fix-rapidio-sysfs-hierarchy.patch
rapidio-powerpc-85xx-modify-rio-port-write-interrupt-handler.patch
rapidio-use-stored-ingress-port-number-instead-of-register-read.patch
rapidio-add-relation-links-between-rio-device-structures.patch
rapidio-add-default-handler-for-error-stopped-state.patch
rapidio-modify-sysfs-initialization-for-switches.patch
rapidio-add-handling-of-orphan-port-write-message.patch
rapidio-add-device-access-check-into-the-enumeration.patch
rapidio-add-support-for-idt-cps-gen2-switches.patch
rapidio-add-handling-of-redundant-routes.patch
reply other threads:[~2010-09-14 22:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201009142221.o8EMLF28021790@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=alexandre.bounine@idt.com \
--cc=galak@kernel.crashing.org \
--cc=leoli@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=micha@neli.hopto.org \
--cc=mm-commits@vger.kernel.org \
--cc=mporter@kernel.crashing.org \
--cc=thomas.moll@sysgo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox