From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: akpm@linux-foundation.org, heukelum@fastmail.fm, hpa@zytor.com,
jbeulich@novell.com, mingo@elte.hu, tglx@linutronix.de
Subject: + arch-x86-kernel-entry_32s-i386-too.patch added to -mm tree
Date: Wed, 15 Sep 2010 14:44:35 -0700 [thread overview]
Message-ID: <201009152215.o8FMFPFw018395@imap1.linux-foundation.org> (raw)
The patch titled
arch/x86/kernel/entry_32.S: i386 too!
has been added to the -mm tree. Its filename is
arch-x86-kernel-entry_32s-i386-too.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: arch/x86/kernel/entry_32.S: i386 too!
From: Andrew Morton <akpm@linux-foundation.org>
arch/x86/kernel/entry_32.S: Assembler messages:
arch/x86/kernel/entry_32.S:385: Error: too many positional arguments
arch/x86/kernel/entry_32.S:391: Error: too many positional arguments
arch/x86/kernel/entry_32.S:398: Error: too many positional arguments
arch/x86/kernel/entry_32.S:586: Error: too many positional arguments
arch/x86/kernel/entry_32.S:760: Error: too many positional arguments
arch/x86/kernel/entry_32.S:1300: Error: too many positional arguments
arch/x86/kernel/entry_32.S:1352: Error: too many positional arguments
arch/x86/kernel/entry_32.S:1363: Error: too many positional arguments
arch/x86/kernel/entry_32.S:760: Error: too many positional arguments
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/kernel/entry_32.S | 134 +++++++++++++++++------------------
1 file changed, 67 insertions(+), 67 deletions(-)
diff -puN arch/x86/kernel/entry_32.S~arch-x86-kernel-entry_32s-i386-too arch/x86/kernel/entry_32.S
--- a/arch/x86/kernel/entry_32.S~arch-x86-kernel-entry_32s-i386-too
+++ a/arch/x86/kernel/entry_32.S
@@ -382,23 +382,23 @@ sysenter_past_esp:
* enough kernel state to call TRACE_IRQS_OFF can be called - but
* we immediately enable interrupts at that point anyway.
*/
- pushl_cfi $(__USER_DS)
+ pushl $(__USER_DS)
/*CFI_REL_OFFSET ss, 0*/
pushl_cfi %ebp
CFI_REL_OFFSET esp, 0
pushfl_cfi
orl $X86_EFLAGS_IF, (%esp)
- pushl_cfi $(__USER_CS)
+ pushl $(__USER_CS)
/*CFI_REL_OFFSET cs, 0*/
/*
* Push current_thread_info()->sysenter_return to the stack.
* A tiny bit of offset fixup is necessary - 4*4 means the 4 words
* pushed above; +8 corresponds to copy_thread's esp0 setting.
*/
- pushl_cfi (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+ pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
CFI_REL_OFFSET eip, 0
- pushl_cfi %eax
+ pushl %eax
SAVE_ALL
ENABLE_INTERRUPTS(CLBR_NONE)
@@ -453,7 +453,7 @@ sysenter_audit:
movl %eax,%edx /* 2nd arg: syscall number */
movl $AUDIT_ARCH_I386,%eax /* 1st arg: audit arch */
call audit_syscall_entry
- pushl_cfi %ebx
+ pushl %ebx
movl PT_EAX(%esp),%eax /* reload syscall number */
jmp sysenter_do_call
@@ -495,7 +495,7 @@ ENDPROC(ia32_sysenter_target)
# system call handler stub
ENTRY(system_call)
RING0_INT_FRAME # can't unwind into user space anyway
- pushl_cfi %eax # save orig_eax
+ pushl %eax # save orig_eax
SAVE_ALL
GET_THREAD_INFO(%ebp)
# system call tracing in operation / emulation
@@ -583,8 +583,8 @@ ldt_ss:
shr $16, %edx
mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
- pushl_cfi $__ESPFIX_SS
- pushl_cfi %eax /* new kernel esp */
+ pushl $__ESPFIX_SS
+ pushl %eax /* new kernel esp */
/* Disable interrupts, but do not irqtrace this section: we
* will soon execute iret and the tracer was already set to
* the irqstate after the iret */
@@ -628,7 +628,7 @@ work_notifysig: # deal with pending s
ALIGN
work_notifysig_v86:
- pushl_cfi %ecx # save ti_flags for do_notify_resume
+ pushl %ecx # save ti_flags for do_notify_resume
call save_v86_state # %eax contains pt_regs pointer
popl_cfi %ecx
movl %eax, %esp
@@ -712,7 +712,7 @@ ptregs_##name: \
ptregs_##name: \
CFI_STARTPROC; \
leal 4(%esp),%eax; \
- pushl_cfi %eax; \
+ pushl %eax; \
movl PT_EDX(%eax),%ecx; \
movl PT_ECX(%eax),%edx; \
movl PT_EBX(%eax),%eax; \
@@ -738,8 +738,8 @@ PTREGSCALL1(vm86old)
ptregs_clone:
CFI_STARTPROC
leal 4(%esp),%eax
- pushl_cfi %eax
- pushl_cfi PT_EDI(%eax)
+ pushl %eax
+ pushl PT_EDI(%eax)
movl PT_EDX(%eax),%ecx
movl PT_ECX(%eax),%edx
movl PT_EBX(%eax),%eax
@@ -763,8 +763,8 @@ ENDPROC(ptregs_clone)
mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
shl $16, %eax
addl %esp, %eax /* the adjusted stack pointer */
- pushl_cfi $__KERNEL_DS
- pushl_cfi %eax
+ pushl $__KERNEL_DS
+ pushl %eax
lss (%esp), %esp /* switch to the normal stack segment */
CFI_ADJUST_CFA_OFFSET -8
.endm
@@ -801,7 +801,7 @@ vector=FIRST_EXTERNAL_VECTOR
.if vector <> FIRST_EXTERNAL_VECTOR
CFI_ADJUST_CFA_OFFSET -4
.endif
-1: pushl_cfi $(~vector+0x80) /* Note: always in signed byte range */
+1: pushl $(~vector+0x80) /* Note: always in signed byte range */
.if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
jmp 2f
.endif
@@ -841,7 +841,7 @@ ENDPROC(common_interrupt)
#define BUILD_INTERRUPT3(name, nr, fn) \
ENTRY(name) \
RING0_INT_FRAME; \
- pushl_cfi $~(nr); \
+ pushl $~(nr); \
SAVE_ALL; \
TRACE_IRQS_OFF \
movl %esp,%eax; \
@@ -857,18 +857,18 @@ ENDPROC(name)
ENTRY(coprocessor_error)
RING0_INT_FRAME
- pushl_cfi $0
- pushl_cfi $do_coprocessor_error
+ pushl $0
+ pushl $do_coprocessor_error
jmp error_code
CFI_ENDPROC
END(coprocessor_error)
ENTRY(simd_coprocessor_error)
RING0_INT_FRAME
- pushl_cfi $0
+ pushl $0
#ifdef CONFIG_X86_INVD_BUG
/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
-661: pushl_cfi $do_general_protection
+661: pushl $do_general_protection
662:
.section .altinstructions,"a"
.balign 4
@@ -883,7 +883,7 @@ ENTRY(simd_coprocessor_error)
664:
.previous
#else
- pushl_cfi $do_simd_coprocessor_error
+ pushl $do_simd_coprocessor_error
#endif
jmp error_code
CFI_ENDPROC
@@ -891,8 +891,8 @@ END(simd_coprocessor_error)
ENTRY(device_not_available)
RING0_INT_FRAME
- pushl_cfi $-1 # mark this as an int
- pushl_cfi $do_device_not_available
+ pushl $-1 # mark this as an int
+ pushl $do_device_not_available
jmp error_code
CFI_ENDPROC
END(device_not_available)
@@ -914,68 +914,68 @@ END(native_irq_enable_sysexit)
ENTRY(overflow)
RING0_INT_FRAME
- pushl_cfi $0
- pushl_cfi $do_overflow
+ pushl $0
+ pushl $do_overflow
jmp error_code
CFI_ENDPROC
END(overflow)
ENTRY(bounds)
RING0_INT_FRAME
- pushl_cfi $0
- pushl_cfi $do_bounds
+ pushl $0
+ pushl $do_bounds
jmp error_code
CFI_ENDPROC
END(bounds)
ENTRY(invalid_op)
RING0_INT_FRAME
- pushl_cfi $0
- pushl_cfi $do_invalid_op
+ pushl $0
+ pushl $do_invalid_op
jmp error_code
CFI_ENDPROC
END(invalid_op)
ENTRY(coprocessor_segment_overrun)
RING0_INT_FRAME
- pushl_cfi $0
- pushl_cfi $do_coprocessor_segment_overrun
+ pushl $0
+ pushl $do_coprocessor_segment_overrun
jmp error_code
CFI_ENDPROC
END(coprocessor_segment_overrun)
ENTRY(invalid_TSS)
RING0_EC_FRAME
- pushl_cfi $do_invalid_TSS
+ pushl $do_invalid_TSS
jmp error_code
CFI_ENDPROC
END(invalid_TSS)
ENTRY(segment_not_present)
RING0_EC_FRAME
- pushl_cfi $do_segment_not_present
+ pushl $do_segment_not_present
jmp error_code
CFI_ENDPROC
END(segment_not_present)
ENTRY(stack_segment)
RING0_EC_FRAME
- pushl_cfi $do_stack_segment
+ pushl $do_stack_segment
jmp error_code
CFI_ENDPROC
END(stack_segment)
ENTRY(alignment_check)
RING0_EC_FRAME
- pushl_cfi $do_alignment_check
+ pushl $do_alignment_check
jmp error_code
CFI_ENDPROC
END(alignment_check)
ENTRY(divide_error)
RING0_INT_FRAME
- pushl_cfi $0 # no error code
- pushl_cfi $do_divide_error
+ pushl $0 # no error code
+ pushl $do_divide_error
jmp error_code
CFI_ENDPROC
END(divide_error)
@@ -983,8 +983,8 @@ END(divide_error)
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
RING0_INT_FRAME
- pushl_cfi $0
- pushl_cfi machine_check_vector
+ pushl $0
+ pushl machine_check_vector
jmp error_code
CFI_ENDPROC
END(machine_check)
@@ -992,8 +992,8 @@ END(machine_check)
ENTRY(spurious_interrupt_bug)
RING0_INT_FRAME
- pushl_cfi $0
- pushl_cfi $do_spurious_interrupt_bug
+ pushl $0
+ pushl $do_spurious_interrupt_bug
jmp error_code
CFI_ENDPROC
END(spurious_interrupt_bug)
@@ -1024,7 +1024,7 @@ ENTRY(xen_sysenter_target)
ENTRY(xen_hypervisor_callback)
CFI_STARTPROC
- pushl_cfi $0
+ pushl $0
SAVE_ALL
TRACE_IRQS_OFF
@@ -1060,7 +1060,7 @@ ENDPROC(xen_hypervisor_callback)
# We distinguish between categories by maintaining a status value in EAX.
ENTRY(xen_failsafe_callback)
CFI_STARTPROC
- pushl_cfi %eax
+ pushl %eax
movl $1,%eax
1: mov 4(%esp),%ds
2: mov 8(%esp),%es
@@ -1073,7 +1073,7 @@ ENTRY(xen_failsafe_callback)
jz 5f
addl $16,%esp
jmp iret_exc # EAX != 0 => Category 2 (Bad IRET)
-5: pushl_cfi $0 # EAX == 0 => Category 1 (Bad segment)
+5: pushl $0 # EAX == 0 => Category 1 (Bad segment)
SAVE_ALL
jmp ret_from_exception
CFI_ENDPROC
@@ -1223,29 +1223,29 @@ syscall_table_size=(.-sys_call_table)
ENTRY(page_fault)
RING0_EC_FRAME
- pushl_cfi $do_page_fault
+ pushl $do_page_fault
ALIGN
error_code:
/* the function address is in %gs's slot on the stack */
- pushl_cfi %fs
+ pushl %fs
/*CFI_REL_OFFSET fs, 0*/
- pushl_cfi %es
+ pushl %es
/*CFI_REL_OFFSET es, 0*/
- pushl_cfi %ds
+ pushl %ds
/*CFI_REL_OFFSET ds, 0*/
- pushl_cfi %eax
+ pushl %eax
CFI_REL_OFFSET eax, 0
- pushl_cfi %ebp
+ pushl %ebp
CFI_REL_OFFSET ebp, 0
- pushl_cfi %edi
+ pushl %edi
CFI_REL_OFFSET edi, 0
- pushl_cfi %esi
+ pushl %esi
CFI_REL_OFFSET esi, 0
- pushl_cfi %edx
+ pushl %edx
CFI_REL_OFFSET edx, 0
- pushl_cfi %ecx
+ pushl %ecx
CFI_REL_OFFSET ecx, 0
- pushl_cfi %ebx
+ pushl %ebx
CFI_REL_OFFSET ebx, 0
cld
movl $(__KERNEL_PERCPU), %ecx
@@ -1288,8 +1288,8 @@ END(page_fault)
CFI_DEF_CFA esp, 0
CFI_UNDEFINED eip
pushfl_cfi
- pushl_cfi $__KERNEL_CS
- pushl_cfi $sysenter_past_esp
+ pushl $__KERNEL_CS
+ pushl $sysenter_past_esp
CFI_REL_OFFSET eip, 0
.endm
@@ -1299,7 +1299,7 @@ ENTRY(debug)
jne debug_stack_correct
FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
debug_stack_correct:
- pushl_cfi $-1 # mark this as an int
+ pushl $-1 # mark this as an int
SAVE_ALL
TRACE_IRQS_OFF
xorl %edx,%edx # error code 0
@@ -1319,14 +1319,14 @@ END(debug)
*/
ENTRY(nmi)
RING0_INT_FRAME
- pushl_cfi %eax
+ pushl %eax
movl %ss, %eax
cmpw $__ESPFIX_SS, %ax
popl_cfi %eax
je nmi_espfix_stack
cmpl $ia32_sysenter_target,(%esp)
je nmi_stack_fixup
- pushl_cfi %eax
+ pushl %eax
movl %esp,%eax
/* Do not access memory above the end of our stack page,
* it might not exist.
@@ -1339,7 +1339,7 @@ ENTRY(nmi)
je nmi_debug_stack_check
nmi_stack_correct:
/* We have a RING0_INT_FRAME here */
- pushl_cfi %eax
+ pushl %eax
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
@@ -1368,14 +1368,14 @@ nmi_espfix_stack:
*
* create the pointer to lss back
*/
- pushl_cfi %ss
- pushl_cfi %esp
+ pushl %ss
+ pushl %esp
addl $4, (%esp)
/* copy the iret frame of 12 bytes */
.rept 3
- pushl_cfi 16(%esp)
+ pushl 16(%esp)
.endr
- pushl_cfi %eax
+ pushl %eax
SAVE_ALL
FIXUP_ESPFIX_STACK # %eax == %esp
xorl %edx,%edx # zero error code
@@ -1389,7 +1389,7 @@ END(nmi)
ENTRY(int3)
RING0_INT_FRAME
- pushl_cfi $-1 # mark this as an int
+ pushl $-1 # mark this as an int
SAVE_ALL
TRACE_IRQS_OFF
xorl %edx,%edx # zero error code
@@ -1401,7 +1401,7 @@ END(int3)
ENTRY(general_protection)
RING0_EC_FRAME
- pushl_cfi $do_general_protection
+ pushl $do_general_protection
jmp error_code
CFI_ENDPROC
END(general_protection)
_
Patches currently in -mm which might be from akpm@linux-foundation.org are
origin.patch
linux-next.patch
next-remove-localversion.patch
fs-inodec-work-around-bug.patch
i-need-old-gcc.patch
efifb-support-the-efi-framebuffer-on-more-apple-hardware-checkpatch-fixes.patch
mm-vmap-area-cache.patch
acpi-apei-fix-erst-move_data-instruction-implementation.patch
arch-x86-kernel-entry_64s-fix-build-with-gas-2161.patch
parport-prevent-arm-boards-frmo-crashing-when-cups-is-loaded-fix.patch
gcc-46-btrfs-clean-up-unused-variables-bugs.patch
drivers-gpu-drm-radeon-atomc-fix-warning.patch
fs-notify-fanotify-fanotify_userc-fix-warnings.patch
hpet-factor-timer-allocate-from-open.patch
leds-route-kbd-leds-through-the-generic-leds-layer.patch
sctp-prevent-reading-out-of-bounds-memory-cleanup.patch
drivers-net-tulip-de4x5c-fix-copy-length-in-de4x5_ioctl-checkpatch-fixes.patch
serial-add-sc16is7x2-driver-update-fix.patch
security-add-const-to-security_task_setscheduler.patch
sched-make-sched_param-argument-static-variables-in-some-sched_setscheduler-caller.patch
drivers-message-fusion-mptsasc-fix-warning.patch
usb-storage-add-new-no_read_disc_info-quirk-fix.patch
mm.patch
oom-kill-all-threads-sharing-oom-killed-tasks-mm-fix.patch
oom-kill-all-threads-sharing-oom-killed-tasks-mm-fix-fix.patch
oom-rewrite-error-handling-for-oom_adj-and-oom_score_adj-tunables.patch
oom-fix-locking-for-oom_adj-and-oom_score_adj.patch
mm-only-build-per-node-scan_unevictable-functions-when-numa-is-enabled-cleanup.patch
memory-hotplug-unify-is_removable-and-offline-detection-code-checkpatch-fixes.patch
frv-duplicate-output_buffer-of-e03-checkpatch-fixes.patch
kernelh-add-minmax3-macros-fix.patch
include-linux-kernelh-add-__must_check-to-strict_strto.patch
scripts-get_maintainerpl-add-git-blame-rolestats-authored-lines-information.patch
mmc_test-move-files-from-sysfs-to-debugfs-checkpatch-fixes.patch
mmc-move-regulator-handling-closer-to-core-v3-fix.patch
sdhci-get-rid-of-card-detect-work-fix.patch
checkpatch-returning-errno-typically-should-be-negative.patch
select-rename-estimate_accuracy-to-select_estimate_accuracy.patch
cgroup_freezer-update_freezer_state-does-incorrect-state-transitions-checkpatch-fixes.patch
core_pattern-fix-long-parameters-was-truncated-by-core_pattern-handler-update.patch
core_pattern-fix-long-parameters-was-truncated-by-core_pattern-handler-update-2.patch
core_pattern-fix-long-parameters-was-truncated-by-core_pattern-handler-update-2-checkpatch-fixes.patch
drivers-char-hvc_consolec-remove-unneeded-__set_current_statetask_running.patch
delay-accounting-re-implement-c-for-getdelaysc-to-report-information-on-a-target-command-checkpatch-fixes.patch
pps-add-async-pps-event-handler-fix.patch
memstick-add-driver-for-ricoh-r5c592-card-reader-cleanups.patch
kernel-resourcec-handle-reinsertion-of-an-already-inserted-resource.patch
vfs-add-super-operation-writeback_inodes-fix.patch
reiser4-export-remove_from_page_cache-fix.patch
reiser4-export-find_get_pages.patch
reiser4.patch
reiser4-writeback_inodes-implementation-fix.patch
reiser4-fixups.patch
reiser4-broke.patch
journal_add_journal_head-debug.patch
slab-leaks3-default-y.patch
put_bh-debug.patch
getblk-handle-2tb-devices.patch
arch-x86-kernel-entry_32s-i386-too.patch
reply other threads:[~2010-09-15 22:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201009152215.o8FMFPFw018395@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=heukelum@fastmail.fm \
--cc=hpa@zytor.com \
--cc=jbeulich@novell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=mm-commits@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox