From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,vbabka@kernel.org,surenb@google.com,rppt@kernel.org,peterz@infradead.org,osalvador@kernel.org,mhocko@suse.com,ljs@kernel.org,liam@infradead.org,lance.yang@linux.dev,jannh@google.com,davem@davemloft.net,andreas@gaisler.com,david@kernel.org,akpm@linux-foundation.org
Subject: [merged mm-stable] mm-drop-pte_clear_not_present_full.patch removed from -mm tree
Date: Tue, 28 Jul 2026 21:15:29 -0700 [thread overview]
Message-ID: <20260729041529.E81BC1F00A3A@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm: drop pte_clear_not_present_full()
has been removed from the -mm tree. Its filename was
mm-drop-pte_clear_not_present_full.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: "David Hildenbrand (Arm)" <david@kernel.org>
Subject: mm: drop pte_clear_not_present_full()
Date: Mon, 29 Jun 2026 15:49:48 +0200
In general, there is no good reason to do anything special when clearing
non-present PTEs.
In theory, HW that does have to invalidate TLBs for non-present PTEs could
benefit from a "full" parameter, but fortunately
pte_clear_not_present_full() is not wired up anymore ... and there would
have to be something very convincing for us to care about that to re-add
it.
So, let's just use pte_clear() directly now. To prevent the compiler
complaining on some configs about "set but not used" addr parameter,
silence that here.
Link: https://lore.kernel.org/20260629-clear_not_present_full_ptes-v2-2-96089871a1e7@kernel.org
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Oscar Salvador (SUSE) <osalvador@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/pgtable.h | 21 ++++-----------------
mm/madvise.c | 4 ++--
2 files changed, 6 insertions(+), 19 deletions(-)
--- a/include/linux/pgtable.h~mm-drop-pte_clear_not_present_full
+++ a/include/linux/pgtable.h
@@ -988,21 +988,6 @@ static inline void update_mmu_tlb(struct
update_mmu_tlb_range(vma, address, ptep, 1);
}
-/*
- * Some architectures may be able to avoid expensive synchronization
- * primitives when modifications are made to PTE's which are already
- * not present, or in the process of an address space destruction.
- */
-#ifndef __HAVE_ARCH_PTE_CLEAR_NOT_PRESENT_FULL
-static inline void pte_clear_not_present_full(struct mm_struct *mm,
- unsigned long address,
- pte_t *ptep,
- int full)
-{
- pte_clear(mm, address, ptep);
-}
-#endif
-
#ifndef clear_not_present_full_ptes
/**
* clear_not_present_full_ptes - Clear multiple not present PTEs which are
@@ -1014,7 +999,7 @@ static inline void pte_clear_not_present
* @full: Whether we are clearing a full mm.
*
* May be overridden by the architecture; otherwise, implemented as a simple
- * loop over pte_clear_not_present_full().
+ * loop over pte_clear().
*
* Context: The caller holds the page table lock. The PTEs are all not present.
* The PTEs are all in the same PMD.
@@ -1022,8 +1007,10 @@ static inline void pte_clear_not_present
static inline void clear_not_present_full_ptes(struct mm_struct *mm,
unsigned long addr, pte_t *ptep, unsigned int nr, int full)
{
+ (void)addr;
+
for (;;) {
- pte_clear_not_present_full(mm, addr, ptep, full);
+ pte_clear(mm, addr, ptep);
if (--nr == 0)
break;
ptep++;
--- a/mm/madvise.c~mm-drop-pte_clear_not_present_full
+++ a/mm/madvise.c
@@ -697,7 +697,7 @@ static int madvise_free_pte_range(pmd_t
clear_not_present_full_ptes(mm, addr, pte, nr, tlb->fullmm);
} else if (softleaf_is_hwpoison(entry) ||
softleaf_is_poison_marker(entry)) {
- pte_clear_not_present_full(mm, addr, pte, tlb->fullmm);
+ pte_clear(mm, addr, pte);
}
continue;
}
@@ -1233,7 +1233,7 @@ static int guard_remove_pte_entry(pte_t
if (is_guard_pte_marker(ptent)) {
/* Simply clear the PTE marker. */
- pte_clear_not_present_full(walk->mm, addr, pte, false);
+ pte_clear(walk->mm, addr, pte);
update_mmu_cache(walk->vma, addr, pte);
}
_
Patches currently in -mm which might be from david@kernel.org are
x86-mm-drop-order-parameter-from-free_pagetable.patch
mm-provide-free_reserved_pages-removing-x86-variant.patch
s390-mm-use-free_reserved_pages-in-vmem_free_pages.patch
mm-bootmem_info-allow-calling-free_bootmem_page-on-pages-without-a-bootmem_type.patch
x86-mm-stop-marking-vmemmap-as-section_info.patch
x86-mm-stop-marking-page-tables-as-mix_section_info.patch
x86-mm-remove-config_have_bootmem_info_node.patch
mm-hugetlb_vmemmap-remove-bootmem_info-leftovers.patch
mm-sparse-remove-bootmem_infoh-include.patch
mm-bootmem_info-remove-config_have_bootmem_info_node.patch
mm-standardize-printing-for-pgtable-entries.patch
reply other threads:[~2026-07-29 4:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729041529.E81BC1F00A3A@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=andreas@gaisler.com \
--cc=davem@davemloft.net \
--cc=david@kernel.org \
--cc=jannh@google.com \
--cc=lance.yang@linux.dev \
--cc=liam@infradead.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=mm-commits@vger.kernel.org \
--cc=osalvador@kernel.org \
--cc=peterz@infradead.org \
--cc=rppt@kernel.org \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox