From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,songmuchun@bytedance.com,akpm@linux-foundation.org
Subject: [to-be-updated] mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support.patch removed from -mm tree
Date: Thu, 10 Sep 2026 16:00:51 -0700 [thread overview]
Message-ID: <20260910230052.646F61F00898@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm/sparse-vmemmap: remove SPARSEMEM_VMEMMAP_PREINIT support
has been removed from the -mm tree. Its filename was
mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support.patch
This patch was dropped because an updated version will be issued
------------------------------------------------------
From: Muchun Song <songmuchun@bytedance.com>
Subject: mm/sparse-vmemmap: remove SPARSEMEM_VMEMMAP_PREINIT support
Date: Tue, 25 Aug 2026 16:46:02 +0800
SPARSEMEM_VMEMMAP_PREINIT existed only to support HugeTLB's early vmemmap
optimization setup.
Now that HugeTLB bootmem vmemmap optimization uses the common
section-based sparse-vmemmap path, the sparse initialization code no
longer needs a separate pre-initialization mechanism for vmemmap
population.
Remove the related Kconfig symbols, section flag, and empty early hook, so
present sections always go through the normal sparse setup path.
Link: https://lore.kernel.org/20260825084608.47437-12-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Qi Zheng <qi.zheng@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/Kconfig | 1 -
fs/Kconfig | 1 -
include/linux/mmzone.h | 25 -------------------------
mm/Kconfig | 5 -----
mm/sparse-vmemmap.c | 13 -------------
mm/sparse.c | 23 ++++++++---------------
6 files changed, 8 insertions(+), 60 deletions(-)
--- a/arch/x86/Kconfig~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/arch/x86/Kconfig
@@ -150,7 +150,6 @@ config X86
select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_WANT_OPTIMIZE_DAX_VMEMMAP if X86_64
select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP if X86_64
- select ARCH_WANT_HUGETLB_VMEMMAP_PREINIT if X86_64
select ARCH_WANTS_THP_SWAP if X86_64
select ARCH_HAS_PARANOID_L1D_FLUSH
select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
--- a/fs/Kconfig~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/fs/Kconfig
@@ -278,7 +278,6 @@ config HUGETLB_PAGE_OPTIMIZE_VMEMMAP
def_bool HUGETLB_PAGE
depends on ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
depends on SPARSEMEM_VMEMMAP
- select SPARSEMEM_VMEMMAP_PREINIT if ARCH_WANT_HUGETLB_VMEMMAP_PREINIT
config HUGETLB_PMD_PAGE_TABLE_SHARING
def_bool HUGETLB_PAGE
--- a/include/linux/mmzone.h~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/include/linux/mmzone.h
@@ -2096,9 +2096,6 @@ enum {
#ifdef CONFIG_ZONE_DEVICE
SECTION_TAINT_ZONE_DEVICE_BIT,
#endif
-#ifdef CONFIG_SPARSEMEM_VMEMMAP_PREINIT
- SECTION_IS_VMEMMAP_PREINIT_BIT,
-#endif
SECTION_MAP_LAST_BIT,
};
@@ -2109,9 +2106,6 @@ enum {
#ifdef CONFIG_ZONE_DEVICE
#define SECTION_TAINT_ZONE_DEVICE BIT(SECTION_TAINT_ZONE_DEVICE_BIT)
#endif
-#ifdef CONFIG_SPARSEMEM_VMEMMAP_PREINIT
-#define SECTION_IS_VMEMMAP_PREINIT BIT(SECTION_IS_VMEMMAP_PREINIT_BIT)
-#endif
#define SECTION_MAP_MASK (~(BIT(SECTION_MAP_LAST_BIT) - 1))
#define SECTION_NID_SHIFT SECTION_MAP_LAST_BIT
@@ -2166,24 +2160,6 @@ static inline int online_device_section(
}
#endif
-#ifdef CONFIG_SPARSEMEM_VMEMMAP_PREINIT
-static inline int preinited_vmemmap_section(const struct mem_section *section)
-{
- return (section &&
- (section->section_mem_map & SECTION_IS_VMEMMAP_PREINIT));
-}
-
-void sparse_vmemmap_init_nid_early(int nid);
-#else
-static inline int preinited_vmemmap_section(const struct mem_section *section)
-{
- return 0;
-}
-static inline void sparse_vmemmap_init_nid_early(int nid)
-{
-}
-#endif
-
static inline int online_section_nr(unsigned long nr)
{
return online_section(__nr_to_section(nr));
@@ -2385,7 +2361,6 @@ static inline unsigned long next_present
#endif
#else
-#define sparse_vmemmap_init_nid_early(_nid) do {} while (0)
#define pfn_in_present_section pfn_valid
#endif /* CONFIG_SPARSEMEM */
--- a/mm/Kconfig~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/mm/Kconfig
@@ -461,8 +461,6 @@ config SPARSEMEM_VMEMMAP
pfn_to_page and page_to_pfn operations. This is the most
efficient option when sufficient kernel resources are available.
-config SPARSEMEM_VMEMMAP_PREINIT
- bool
#
# Select this config option from the architecture Kconfig, if it is preferred
# to enable the feature of HugeTLB/dev_dax vmemmap optimization.
@@ -473,9 +471,6 @@ config ARCH_WANT_OPTIMIZE_DAX_VMEMMAP
config ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
bool
-config ARCH_WANT_HUGETLB_VMEMMAP_PREINIT
- bool
-
config HAVE_MEMBLOCK_PHYS_MAP
bool
--- a/mm/sparse.c~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/mm/sparse.c
@@ -284,27 +284,20 @@ static void __init sparse_init_nid(int n
if (sparse_usage_init(nid, map_count))
panic("Failed to allocate usemap for node %d\n", nid);
- sparse_vmemmap_init_nid_early(nid);
-
for_each_present_section_nr(pnum_begin, pnum) {
- struct mem_section *ms;
unsigned long pfn = section_nr_to_pfn(pnum);
+ struct page *map;
if (pnum >= pnum_end)
break;
- ms = __nr_to_section(pnum);
- if (!preinited_vmemmap_section(ms)) {
- struct page *map;
-
- map = __populate_section_memmap(pfn, PAGES_PER_SECTION,
- nid, NULL, NULL);
- if (!map)
- panic("Failed to allocate memmap for section %lu\n", pnum);
- memmap_boot_pages_add(section_nr_vmemmap_pages(pfn, PAGES_PER_SECTION,
- NULL, NULL));
- sparse_init_early_section(nid, map, pnum, 0);
- }
+ map = __populate_section_memmap(pfn, PAGES_PER_SECTION,
+ nid, NULL, NULL);
+ if (!map)
+ panic("Failed to allocate memmap for section %lu\n", pnum);
+ memmap_boot_pages_add(section_nr_vmemmap_pages(pfn, PAGES_PER_SECTION,
+ NULL, NULL));
+ sparse_init_early_section(nid, map, pnum, 0);
}
sparse_usage_fini();
}
--- a/mm/sparse-vmemmap.c~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/mm/sparse-vmemmap.c
@@ -594,19 +594,6 @@ struct page * __meminit __populate_secti
return pfn_to_page(pfn);
}
-#ifdef CONFIG_SPARSEMEM_VMEMMAP_PREINIT
-/*
- * This is called just before initializing sections for a NUMA node.
- * Any special initialization that needs to be done before the
- * generic initialization can be done from here. Sections that
- * are initialized in hooks called from here will be skipped by
- * the generic initialization.
- */
-void __init sparse_vmemmap_init_nid_early(int nid)
-{
-}
-#endif
-
static void subsection_mask_set(unsigned long *map, unsigned long pfn,
unsigned long nr_pages)
{
_
Patches currently in -mm which might be from songmuchun@bytedance.com are
mm-sparse-inline-usemap-allocation-into-sparse_init_nid.patch
mm-sparse-remove-section_map_size.patch
mm-hugetlb-remove-huge_bootmem_hvo.patch
mm-hugetlb-remove-huge_bootmem_cma.patch
mm-hugetlb-localize-struct-huge_bootmem_page.patch
mm-hugetlb-localize-huge_bootmem_zones_valid.patch
mm-sparse-vmemmap-introduce-config_sparsemem_vmemmap_optimization.patch
mm-sparse-vmemmap-factor-out-shared-vmemmap-tail-page-allocation.patch
mm-sparse-vmemmap-open-code-init_compound_tail.patch
mm-sparse-vmemmap-prepare-dax-vmemmap-population-for-section-orders.patch
mm-sparse-vmemmap-set-section-order-for-device-dax.patch
mm-sparse-vmemmap-switch-device-dax-to-shared-tail-vmemmap-pages.patch
mm-sparse-vmemmap-move-hvo-helpers-to-a-public-header.patch
powerpc-mm-switch-device-dax-to-shared-tail-vmemmap-pages.patch
mm-sparse-vmemmap-drop-the-extra-tail-page-from-device-dax-reservation.patch
mm-sparse-vmemmap-drop-unused-section_nr_vmemmap_pages-arguments.patch
documentation-mm-update-dax-vmemmap-deduplication-docs.patch
reply other threads:[~2026-09-10 23:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910230052.646F61F00898@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=mm-commits@vger.kernel.org \
--cc=songmuchun@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox