From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,zaslonko@linux.ibm.com,oberpar@linux.ibm.com,nsc@kernel.org,nathan@kernel.org,masahiroy@kernel.org,arnd@arndb.de,khorenko@virtuozzo.com,akpm@linux-foundation.org
Subject: + kbuild-move-gcov-flags-to-scripts-makefilegcov.patch added to mm-nonmm-unstable branch
Date: Thu, 01 Oct 2026 17:51:51 -0700 [thread overview]
Message-ID: <20261002005152.082281F00893@smtp.kernel.org> (raw)
The patch titled
Subject: kbuild: move GCOV flags to scripts/Makefile.gcov
has been added to the -mm mm-nonmm-unstable branch. Its filename is
kbuild-move-gcov-flags-to-scripts-makefilegcov.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/kbuild-move-gcov-flags-to-scripts-makefilegcov.patch
This patch will later appear in the mm-nonmm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via various
branches at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there most days
------------------------------------------------------
From: Konstantin Khorenko <khorenko@virtuozzo.com>
Subject: kbuild: move GCOV flags to scripts/Makefile.gcov
Date: Thu, 01 Oct 2026 18:57:12 +0200
* split the CFLAGS_GCOV block out of the top-level Makefile into
scripts/Makefile.gcov
* include it via include-$(CONFIG_GCOV_KERNEL) like neighbour
KASAN/KCOV/UBSAN makefiles do
* keep the include before scripts/Makefile.gcc-plugins: the try-run
must not get -fplugin= options, plugins do not exist on clean builds
CFLAGS_GCOV is no longer defined when CONFIG_GCOV_KERNEL is off:
* its user in scripts/Makefile.lib is guarded by the CONFIG_GCOV_KERNEL
* in i915/xe header an empty value is harmless
The try-run compiler invocations also stop running on builds without
GCOV.
Link: https://lore.kernel.org/20261001-b4-prep-gcov-v1-2-794792e06f24@virtuozzo.com
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nsc@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
---
MAINTAINERS | 1 +
Makefile | 22 +---------------------
scripts/Makefile.gcov | 21 +++++++++++++++++++++
3 files changed, 23 insertions(+), 21 deletions(-)
--- a/MAINTAINERS~kbuild-move-gcov-flags-to-scripts-makefilegcov
+++ a/MAINTAINERS
@@ -10898,6 +10898,7 @@ M: Peter Oberparleiter <oberpar@linux.ib
S: Maintained
F: Documentation/dev-tools/gcov.rst
F: kernel/gcov/
+F: scripts/Makefile.gcov
GDB KERNEL DEBUGGING HELPER SCRIPTS
M: Jan Kiszka <jan.kiszka@siemens.com>
--- a/Makefile~kbuild-move-gcov-flags-to-scripts-makefilegcov
+++ a/Makefile
@@ -1176,27 +1176,6 @@ endif
# Ensure compilers do not transform certain loops into calls to wcslen()
KBUILD_CFLAGS += -fno-builtin-wcslen
-CFLAGS_GCOV := -fprofile-arcs -ftest-coverage
-ifdef CONFIG_CC_IS_GCC
-CFLAGS_GCOV += -fno-tree-loop-im
-# Use atomic counter updates to avoid concurrent-access crashes in GCOV.
-# Only enable if -fprofile-update=prefer-atomic does not introduce new
-# undefined symbols (e.g. libatomic calls that the kernel cannot link).
-CFLAGS_GCOV += $(call try-run,\
- echo 'long long x; void f(void){x++;}' | \
- $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -w $(CFLAGS_GCOV) \
- -x c - -c -o "$$TMP.base" && \
- echo 'long long x; void f(void){x++;}' | \
- $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -w $(CFLAGS_GCOV) \
- -fprofile-update=prefer-atomic \
- -x c - -c -o "$$TMP" && \
- $(NM) "$$TMP.base" | grep ' U ' > "$$TMP.ubase" || true ; \
- $(NM) "$$TMP" | grep ' U ' > "$$TMP.utest" || true ; \
- cmp -s "$$TMP.ubase" "$$TMP.utest",\
- -fprofile-update=prefer-atomic)
-endif
-export CFLAGS_GCOV
-
# change __FILE__ to the relative path to the source directory
ifdef building_out_of_srctree
KBUILD_CPPFLAGS += -fmacro-prefix-map=$(srcroot)/=
@@ -1214,6 +1193,7 @@ include-$(CONFIG_KCSAN) += scripts/Make
include-$(CONFIG_KMSAN) += scripts/Makefile.kmsan
include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan
include-$(CONFIG_KCOV) += scripts/Makefile.kcov
+include-$(CONFIG_GCOV_KERNEL) += scripts/Makefile.gcov
include-$(CONFIG_RANDSTRUCT) += scripts/Makefile.randstruct
include-$(CONFIG_KSTACK_ERASE) += scripts/Makefile.kstack_erase
include-$(CONFIG_AUTOFDO_CLANG) += scripts/Makefile.autofdo
diff --git a/scripts/Makefile.gcov a/scripts/Makefile.gcov
new file mode 100644
--- /dev/null
+++ a/scripts/Makefile.gcov
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-only
+CFLAGS_GCOV := -fprofile-arcs -ftest-coverage
+ifdef CONFIG_CC_IS_GCC
+CFLAGS_GCOV += -fno-tree-loop-im
+# Use atomic counter updates to avoid concurrent-access crashes in GCOV.
+# Only enable if -fprofile-update=prefer-atomic does not introduce new
+# undefined symbols (e.g. libatomic calls that the kernel cannot link).
+CFLAGS_GCOV += $(call try-run,\
+ echo 'long long x; void f(void){x++;}' | \
+ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -w $(CFLAGS_GCOV) \
+ -x c - -c -o "$$TMP.base" && \
+ echo 'long long x; void f(void){x++;}' | \
+ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -w $(CFLAGS_GCOV) \
+ -fprofile-update=prefer-atomic \
+ -x c - -c -o "$$TMP" && \
+ $(NM) "$$TMP.base" | grep ' U ' > "$$TMP.ubase" || true ; \
+ $(NM) "$$TMP" | grep ' U ' > "$$TMP.utest" || true ; \
+ cmp -s "$$TMP.ubase" "$$TMP.utest",\
+ -fprofile-update=prefer-atomic)
+endif
+export CFLAGS_GCOV
_
Patches currently in -mm which might be from khorenko@virtuozzo.com are
selftests-core-fix-unshare_test-with-large-fsnr_open.patch
kbuild-use-cflags_gcov-in-the-prefer-atomic-try-run-test.patch
kbuild-move-gcov-flags-to-scripts-makefilegcov.patch
reply other threads:[~2026-10-02 0:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261002005152.082281F00893@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=khorenko@virtuozzo.com \
--cc=masahiroy@kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=nathan@kernel.org \
--cc=nsc@kernel.org \
--cc=oberpar@linux.ibm.com \
--cc=zaslonko@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox