From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,vbabka@kernel.org,surenb@google.com,rppt@kernel.org,qi.zheng@linux.dev,osalvador@suse.de,mhocko@suse.com,ljs@kernel.org,liam@infradead.org,david.laight.linux@gmail.com,david@kernel.org,songmuchun@bytedance.com,akpm@linux-foundation.org
Subject: [merged mm-stable] mm-sparse-vmemmap-rename-hvo-order-macros.patch removed from -mm tree
Date: Tue, 06 Oct 2026 17:49:07 -0700 [thread overview]
Message-ID: <20261007004907.C01D71F0089B@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm/sparse-vmemmap: rename HVO order macros
has been removed from the -mm tree. Its filename was
mm-sparse-vmemmap-rename-hvo-order-macros.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Muchun Song <songmuchun@bytedance.com>
Subject: mm/sparse-vmemmap: rename HVO order macros
Date: Thu, 10 Sep 2026 14:32:41 +0800
The macros VMEMMAP_TAIL_MIN_ORDER and NR_VMEMMAP_TAILS describe the order
range where HVO can be applied, but their names tie that range to the
tail-page cache implementation.
Rename them with a VMEMMAP_OPTIMIZATION prefix and use the new names in
the HVO paths. This makes the code describe the optimization requirements
rather than the tail-page cache implementation detail.
No functional change intended.
Link: https://lore.kernel.org/20260910063256.64386-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Qi Zheng <qi.zheng@linux.dev>
Cc: David Hildenbrand (Arm) <david@kernel.org>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
---
include/linux/mmzone.h | 17 +++++++++--------
mm/hugetlb.c | 4 ++--
mm/hugetlb_vmemmap.c | 2 +-
mm/sparse-vmemmap.c | 4 ++--
4 files changed, 14 insertions(+), 13 deletions(-)
--- a/include/linux/mmzone.h~mm-sparse-vmemmap-rename-hvo-order-macros
+++ a/include/linux/mmzone.h
@@ -107,13 +107,14 @@
is_power_of_2(sizeof(struct page)) ? \
MAX_FOLIO_NR_PAGES * sizeof(struct page) : 0)
-/*
- * vmemmap optimization (like HVO) is only possible for page orders that fill
- * two or more pages with struct pages.
- */
-#define VMEMMAP_TAIL_MIN_ORDER (ilog2(2 * PAGE_SIZE / sizeof(struct page)))
-#define __NR_VMEMMAP_TAILS (MAX_FOLIO_ORDER - VMEMMAP_TAIL_MIN_ORDER + 1)
-#define NR_VMEMMAP_TAILS (__NR_VMEMMAP_TAILS > 0 ? __NR_VMEMMAP_TAILS : 0)
+/* The number of struct pages covered by the retained vmemmap pages with HVO enabled. */
+#define VMEMMAP_OPTIMIZATION_NR_STRUCT_PAGES (PAGE_SIZE / sizeof(struct page))
+#define VMEMMAP_OPTIMIZATION_MIN_ORDER (ilog2(VMEMMAP_OPTIMIZATION_NR_STRUCT_PAGES) + 1)
+
+#define __VMEMMAP_OPTIMIZATION_NR_ORDERS \
+ (MAX_FOLIO_ORDER - VMEMMAP_OPTIMIZATION_MIN_ORDER + 1)
+#define VMEMMAP_OPTIMIZATION_NR_ORDERS \
+ (__VMEMMAP_OPTIMIZATION_NR_ORDERS > 0 ? __VMEMMAP_OPTIMIZATION_NR_ORDERS : 0)
enum migratetype {
MIGRATE_UNMOVABLE,
@@ -1158,7 +1159,7 @@ struct zone {
atomic_long_t vm_stat[NR_VM_ZONE_STAT_ITEMS];
atomic_long_t vm_numa_event[NR_VM_NUMA_EVENT_ITEMS];
#ifdef CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
- struct page *vmemmap_tails[NR_VMEMMAP_TAILS];
+ struct page *vmemmap_tails[VMEMMAP_OPTIMIZATION_NR_ORDERS];
#endif
} ____cacheline_internodealigned_in_smp;
--- a/mm/hugetlb.c~mm-sparse-vmemmap-rename-hvo-order-macros
+++ a/mm/hugetlb.c
@@ -3357,7 +3357,7 @@ void __init hugetlb_bootmem_struct_page_
struct zone *zone;
for_each_zone(zone) {
- for (int i = 0; i < NR_VMEMMAP_TAILS; i++) {
+ for (int i = 0; i < VMEMMAP_OPTIMIZATION_NR_ORDERS; i++) {
struct page *tail, *p;
unsigned int order;
@@ -3365,7 +3365,7 @@ void __init hugetlb_bootmem_struct_page_
if (!tail)
continue;
- order = i + VMEMMAP_TAIL_MIN_ORDER;
+ order = i + VMEMMAP_OPTIMIZATION_MIN_ORDER;
p = page_to_virt(tail);
/*
* prep_and_add_bootmem_folios() can access pageblock
--- a/mm/hugetlb_vmemmap.c~mm-sparse-vmemmap-rename-hvo-order-macros
+++ a/mm/hugetlb_vmemmap.c
@@ -494,7 +494,7 @@ static bool vmemmap_should_optimize_foli
static struct page *vmemmap_get_tail(unsigned int order, struct zone *zone)
{
- const unsigned int idx = order - VMEMMAP_TAIL_MIN_ORDER;
+ const unsigned int idx = order - VMEMMAP_OPTIMIZATION_MIN_ORDER;
struct page *tail, *p;
int node = zone_to_nid(zone);
--- a/mm/sparse-vmemmap.c~mm-sparse-vmemmap-rename-hvo-order-macros
+++ a/mm/sparse-vmemmap.c
@@ -329,12 +329,12 @@ static __meminit struct page *vmemmap_ge
unsigned int idx;
int node = zone_to_nid(zone);
- if (WARN_ON_ONCE(order < VMEMMAP_TAIL_MIN_ORDER))
+ if (WARN_ON_ONCE(order < VMEMMAP_OPTIMIZATION_MIN_ORDER))
return NULL;
if (WARN_ON_ONCE(order > MAX_FOLIO_ORDER))
return NULL;
- idx = order - VMEMMAP_TAIL_MIN_ORDER;
+ idx = order - VMEMMAP_OPTIMIZATION_MIN_ORDER;
tail = zone->vmemmap_tails[idx];
if (tail)
return tail;
_
Patches currently in -mm which might be from songmuchun@bytedance.com are
reply other threads:[~2026-10-07 0:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261007004907.C01D71F0089B@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=david.laight.linux@gmail.com \
--cc=david@kernel.org \
--cc=liam@infradead.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=mm-commits@vger.kernel.org \
--cc=osalvador@suse.de \
--cc=qi.zheng@linux.dev \
--cc=rppt@kernel.org \
--cc=songmuchun@bytedance.com \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox