From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,lyugaofei@xiaomi.com,akpm@linux-foundation.org
Subject: [to-be-updated] mm-mglru-avoid-prolonged-anon-reclaim-with-swappiness=200.patch removed from -mm tree
Date: Sat, 14 Nov 2026 13:59:23 -0800 [thread overview]
Message-ID: <20261114215923.CE0C71F000C4@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm/mglru: avoid prolonged anon reclaim with swappiness=200
has been removed from the -mm tree. Its filename was
mm-mglru-avoid-prolonged-anon-reclaim-with-swappiness=200.patch
This patch was dropped because an updated version will be issued
------------------------------------------------------
From: Gaofei Lyu <lyugaofei@xiaomi.com>
Subject: mm/mglru: avoid prolonged anon reclaim with swappiness=200
Date: Sat, 14 Nov 2026 02:55:39 +0800
It has been observed that swappiness=200 can significantly slow down
reclaim on some machines, with some workloads running 3x slower under
MGLRU than under CLRU.
This is because swappiness=200 currently results in file_factor=0. Give
file reclaim a small factor at lower priorities, for example, when
sc->priority < DEF_PRIORITY / 2.
Link: https://lore.kernel.org/20261113185541.70203-15-baohua@kernel.org
Signed-off-by: Gaofei Lyu <lyugaofei@xiaomi.com>
Signed-off-by: Barry Song (Xiaomi) <baohua@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Co-developed-by: Barry Song (Xiaomi) <baohua@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <baoquan.he@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <hui.zhu@linux.dev>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kunwu Chan <kunwu.chan@gmail.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: wang lian <lianux.mm@gmail.com>
Cc: <liuxiang.277@bytedance.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <qi.zheng@linux.dev>
Cc: Ridong Chen <ridong.chen@linux.dev>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: wangzicheng <wangzicheng@honor.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Bo Zhang <zhangbo56@xiaomi.com>
Cc: Hui Zhu <zhuhui@kylinos.cn>
Cc: Siddharth Chintamaneni <sidchintamaneni@gmail.com>
Cc: Bo Zhang <zhangbo0325@gmail.com>
---
mm/vmscan.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/mm/vmscan.c~mm-mglru-avoid-prolonged-anon-reclaim-with-swappiness=200
+++ a/mm/vmscan.c
@@ -4899,8 +4899,8 @@ static int get_tier_idx(struct lruvec *l
* We don't calculate the scan cost, MGLRU uses lazy promotion, which will
* cancel the scan budget natually.
*/
-static void lru_gen_balance_scan(struct lruvec *lruvec, int swappiness,
- unsigned long total_scan, unsigned long nr[])
+static void lru_gen_balance_scan(struct lruvec *lruvec, struct scan_control *sc,
+ int swappiness, unsigned long total_scan, unsigned long nr[])
{
struct lru_gen_folio *lrugen = &lruvec->lrugen;
u64 refault_rate[ANON_AND_FILE], anon_factor, file_factor;
@@ -4957,7 +4957,12 @@ static void lru_gen_balance_scan(struct
file_weight = nr[LRU_GEN_FILE] + nr[LRU_GEN_ANON] / size_bias;
anon_factor = (u64)swappiness * refault_rate[LRU_GEN_FILE] * anon_weight;
- file_factor = (u64)(MAX_SWAPPINESS - swappiness) * refault_rate[LRU_GEN_ANON] * file_weight;
+ if (swappiness == MAX_SWAPPINESS)
+ file_factor = sc->priority < DEF_PRIORITY / 2 ?
+ refault_rate[LRU_GEN_ANON] * file_weight : 0;
+ else
+ file_factor = (u64)(MAX_SWAPPINESS - swappiness) *
+ refault_rate[LRU_GEN_ANON] * file_weight;
/* Cross-multiply the ratio above. */
anon_scan = mul_u64_u64_div_u64(total_scan, anon_factor, anon_factor + file_factor);
@@ -5154,7 +5159,7 @@ static void lru_gen_prepare_scan(struct
total = apply_proportional_protection(memcg, sc, total);
total >>= sc->priority;
- lru_gen_balance_scan(lruvec, swappiness, total, nr_to_scan);
+ lru_gen_balance_scan(lruvec, sc, swappiness, total, nr_to_scan);
}
static bool should_abort_scan(struct lruvec *lruvec, struct scan_control *sc)
@@ -5914,7 +5919,7 @@ static int run_eviction(struct lruvec *l
return 0;
lruvec_evictable_size(lruvec, sc, swappiness, nr_to_scan);
- lru_gen_balance_scan(lruvec, swappiness,
+ lru_gen_balance_scan(lruvec, sc, swappiness,
nr_to_reclaim - sc->nr_reclaimed, nr_to_scan);
if (!evict_folio_lists(nr_to_scan, lruvec, sc, swappiness, MAX_LRU_BATCH))
_
Patches currently in -mm which might be from lyugaofei@xiaomi.com are
next reply other threads:[~2026-11-14 21:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-14 21:59 Andrew Morton [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-11-13 19:41 [to-be-updated] mm-mglru-avoid-prolonged-anon-reclaim-with-swappiness=200.patch removed from -mm tree Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261114215923.CE0C71F000C4@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=lyugaofei@xiaomi.com \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox