From: Mat Martineau <mathew.j.martineau@linux.intel.com>
To: Paolo Abeni <pabeni@redhat.com>
Cc: mptcp@lists.linux.dev
Subject: Re: [PATCH v3 mptcp-next] mptcp: refine mptcp_cleanup_rbuf
Date: Wed, 16 Jun 2021 17:13:12 -0700 (PDT) [thread overview]
Message-ID: <a5dfa3f-d52c-70e1-260-141ca530@linux.intel.com> (raw)
In-Reply-To: <93432e2a93c4ae6124fb607346ecfac45d40b2b3.1623835767.git.pabeni@redhat.com>
On Wed, 16 Jun 2021, Paolo Abeni wrote:
> The current cleanup rbuf tries a bit too hard to avoid acquiring
> the subflow socket lock. We may end-up delaying the needed ack,
> or skip acking a blocked subflow.
>
> Address the above extending the conditions used to trigger the cleanup
> to reflect more closely what TCP does and invoking tcp_cleanup_rbuf()
> on all the active subflows.
>
> Note that we can't replicate the exact tests implemented in
> tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g.
> ping-pong mode.
>
> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
> ---
> v2 -> v3:
> - mptcp_subflow_cleanup_rbuf() returns void
Thanks for the v3, this looks ready to apply.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
> v1 -> v2:
> - access ssk icsk/tp state instead of msk (Mat)
> ---
> net/mptcp/protocol.c | 56 ++++++++++++++++++--------------------------
> net/mptcp/protocol.h | 1 -
> 2 files changed, 23 insertions(+), 34 deletions(-)
>
> diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
> index 0a220862f62d..05c8382aafef 100644
> --- a/net/mptcp/protocol.c
> +++ b/net/mptcp/protocol.c
> @@ -442,49 +442,46 @@ static void mptcp_send_ack(struct mptcp_sock *msk)
> }
> }
>
> -static bool mptcp_subflow_cleanup_rbuf(struct sock *ssk)
> +static void mptcp_subflow_cleanup_rbuf(struct sock *ssk)
> {
> bool slow;
> - int ret;
>
> slow = lock_sock_fast(ssk);
> - ret = tcp_can_send_ack(ssk);
> - if (ret)
> + if (tcp_can_send_ack(ssk))
> tcp_cleanup_rbuf(ssk, 1);
> unlock_sock_fast(ssk, slow);
> - return ret;
> +}
> +
> +static bool mptcp_subflow_could_cleanup(const struct sock *ssk, bool rx_empty)
> +{
> + const struct inet_connection_sock *icsk = inet_csk(ssk);
> + bool ack_pending = READ_ONCE(icsk->icsk_ack.pending);
> + const struct tcp_sock *tp = tcp_sk(ssk);
> +
> + return (ack_pending & ICSK_ACK_SCHED) &&
> + ((READ_ONCE(tp->rcv_nxt) - READ_ONCE(tp->rcv_wup) >
> + READ_ONCE(icsk->icsk_ack.rcv_mss)) ||
> + (rx_empty && ack_pending &
> + (ICSK_ACK_PUSHED2 | ICSK_ACK_PUSHED)));
> }
>
> static void mptcp_cleanup_rbuf(struct mptcp_sock *msk)
> {
> - struct sock *ack_hint = READ_ONCE(msk->ack_hint);
> int old_space = READ_ONCE(msk->old_wspace);
> struct mptcp_subflow_context *subflow;
> struct sock *sk = (struct sock *)msk;
> - bool cleanup;
> + int space = __mptcp_space(sk);
> + bool cleanup, rx_empty;
>
> - /* this is a simple superset of what tcp_cleanup_rbuf() implements
> - * so that we don't have to acquire the ssk socket lock most of the time
> - * to do actually nothing
> - */
> - cleanup = __mptcp_space(sk) - old_space >= max(0, old_space);
> - if (!cleanup)
> - return;
> + cleanup = (space > 0) && (space >= (old_space << 1));
> + rx_empty = !atomic_read(&sk->sk_rmem_alloc);
>
> - /* if the hinted ssk is still active, try to use it */
> - if (likely(ack_hint)) {
> - mptcp_for_each_subflow(msk, subflow) {
> - struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
> + mptcp_for_each_subflow(msk, subflow) {
> + struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
>
> - if (ack_hint == ssk && mptcp_subflow_cleanup_rbuf(ssk))
> - return;
> - }
> + if (cleanup || mptcp_subflow_could_cleanup(ssk, rx_empty))
> + mptcp_subflow_cleanup_rbuf(ssk);
> }
> -
> - /* otherwise pick the first active subflow */
> - mptcp_for_each_subflow(msk, subflow)
> - if (mptcp_subflow_cleanup_rbuf(mptcp_subflow_tcp_sock(subflow)))
> - return;
> }
>
> static bool mptcp_check_data_fin(struct sock *sk)
> @@ -629,7 +626,6 @@ static bool __mptcp_move_skbs_from_subflow(struct mptcp_sock *msk,
> break;
> }
> } while (more_data_avail);
> - WRITE_ONCE(msk->ack_hint, ssk);
>
> *bytes += moved;
> return done;
> @@ -1910,7 +1906,6 @@ static bool __mptcp_move_skbs(struct mptcp_sock *msk)
> __mptcp_update_rmem(sk);
> done = __mptcp_move_skbs_from_subflow(msk, ssk, &moved);
> mptcp_data_unlock(sk);
> - tcp_cleanup_rbuf(ssk, moved);
>
> if (unlikely(ssk->sk_err))
> __mptcp_error_report(sk);
> @@ -1926,7 +1921,6 @@ static bool __mptcp_move_skbs(struct mptcp_sock *msk)
> ret |= __mptcp_ofo_queue(msk);
> __mptcp_splice_receive_queue(sk);
> mptcp_data_unlock(sk);
> - mptcp_cleanup_rbuf(msk);
> }
> if (ret)
> mptcp_check_data_fin((struct sock *)msk);
> @@ -2175,9 +2169,6 @@ static void __mptcp_close_ssk(struct sock *sk, struct sock *ssk,
> if (ssk == msk->last_snd)
> msk->last_snd = NULL;
>
> - if (ssk == msk->ack_hint)
> - msk->ack_hint = NULL;
> -
> if (ssk == msk->first)
> msk->first = NULL;
>
> @@ -2392,7 +2383,6 @@ static int __mptcp_init_sock(struct sock *sk)
> msk->rmem_released = 0;
> msk->tx_pending_data = 0;
>
> - msk->ack_hint = NULL;
> msk->first = NULL;
> inet_csk(sk)->icsk_sync_mss = mptcp_sync_mss;
> WRITE_ONCE(msk->csum_enabled, mptcp_is_checksum_enabled(sock_net(sk)));
> diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
> index 41f2957bf50c..2480db50cbd2 100644
> --- a/net/mptcp/protocol.h
> +++ b/net/mptcp/protocol.h
> @@ -243,7 +243,6 @@ struct mptcp_sock {
> bool use_64bit_ack; /* Set when we received a 64-bit DSN */
> bool csum_enabled;
> spinlock_t join_list_lock;
> - struct sock *ack_hint;
> struct work_struct work;
> struct sk_buff *ooo_last_skb;
> struct rb_root out_of_order_queue;
> --
> 2.26.3
>
>
>
--
Mat Martineau
Intel
next prev parent reply other threads:[~2021-06-17 0:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-16 9:29 [PATCH v3 mptcp-next] mptcp: refine mptcp_cleanup_rbuf Paolo Abeni
2021-06-17 0:13 ` Mat Martineau [this message]
2021-06-17 13:28 ` Matthieu Baerts
2021-06-18 17:35 ` Paolo Abeni
2021-06-21 10:50 ` Paolo Abeni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a5dfa3f-d52c-70e1-260-141ca530@linux.intel.com \
--to=mathew.j.martineau@linux.intel.com \
--cc=mptcp@lists.linux.dev \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox