From: Byungho An <bh74.an@samsung.com>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: 'Giuseppe CAVALLARO' <peppe.cavallaro@st.com>,
davem@davemloft.net, jeffrey.t.kirsher@intel.com,
kgene.kim@samsung.com
Subject: [PATCH v2 2/3] net: stmmac: add autoneg complete irq
Date: Tue, 08 Jan 2013 15:32:00 -0800 [thread overview]
Message-ID: <000501cdedf8$5c323900$1496ab00$@samsung.com> (raw)
This patch adds auto-negotiation complete irq and ISR.
when the irq is occured it read GMAC_AN_STATUS register
to clear PCSANCIS bit.
Singed-off-by: Byungho An <bh74.an@samsung.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 5 +++++
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++
4 files changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h
b/drivers/net/ethernet/stmicro/stmmac/common.h
index 72ba769..bc5ce7a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -203,6 +203,7 @@ enum core_specific_irq_mask {
core_irq_tx_path_exit_lpi_mode = 32,
core_irq_rx_path_in_lpi_mode = 64,
core_irq_rx_path_exit_lpi_mode = 128,
+ core_irq_pcs_autoneg_complete = 256,
};
/* DMA HW capabilities */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index a0737b39..0643ed3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -222,6 +222,11 @@ static int dwmac1000_irq_status(void __iomem *ioaddr)
readl(ioaddr + GMAC_PMT);
status |= core_irq_receive_pmt_irq;
}
+ if (unlikely(intr_status & pcs_ane_irq)) {
+ CHIP_DBG(KERN_INFO "GMAC: PCS Auto-negotiation complete\n");
+ readl(ioaddr + GMAC_AN_STATUS);
+ status |= core_irq_pcs_autoneg_complete;
+ }
/* MAC trx/rx EEE LPI entry/exit interrupts */
if (intr_status & lpiis_irq) {
/* Clean LPI interrupt by reading the Reg 12 */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b05df89..b4220f3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -93,6 +93,7 @@ struct stmmac_priv {
u32 tx_coal_timer;
int use_riwt;
u32 rx_riwt;
+ bool core_pcs_an;
};
extern int phyaddr;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3e28934..0d2afbb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1623,6 +1623,8 @@ static irqreturn_t stmmac_interrupt(int irq, void
*dev_id)
priv->xstats.mmc_rx_csum_offload_irq_n++;
if (status & core_irq_receive_pmt_irq)
priv->xstats.irq_receive_pmt_irq_n++;
+ if (status & core_irq_pcs_autoneg_complete)
+ priv->core_pcs_an = true;
/* For LPI we need to save the tx status */
if (status & core_irq_tx_path_in_lpi_mode) {
--
1.7.10.4
reply other threads:[~2013-01-08 23:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000501cdedf8$5c323900$1496ab00$@samsung.com' \
--to=bh74.an@samsung.com \
--cc=davem@davemloft.net \
--cc=jeffrey.t.kirsher@intel.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox