From: "Ravinandan Arakali" <ravinandan.arakali@s2io.com>
To: "'Jeff Garzik'" <jgarzik@pobox.com>,
"'Francois Romieu'" <romieu@fr.zoreil.com>
Cc: <netdev@oss.sgi.com>, <leonid.grossman@s2io.com>,
<raghavendra.koushik@s2io.com>, <rapuru.sriram@s2io.com>,
<alicia.pena@s2io.com>
Subject: [PATCH 2.6.9-rc2 7/12] S2io: NAPI fix
Date: Thu, 28 Oct 2004 11:34:22 -0700 [thread overview]
Message-ID: <001301c4bd1c$cf5a44b0$9810100a@S2IOtech.com> (raw)
In-Reply-To:
Hi,
This patch contains the following NAPI related fixes.
1. When processing Rx packets, making sure that get offset of ring does not cross the put
offset.
2. when NAPI is not in use a new spinlock(put_lock) is used to make sure accessing put
offset of ring is atomic.
3. Also introduced a new vaiable put_pos in nic_t to keep track of absolute position of the
put pointer of Rx ring.
4. When NAPI is used, fill_rx_buffer is not called from the interrupt handler(s2io_isr) .
5. In s2io_poll, decrementing packets processed is done inside the while loop unlike out
side it as was being done last time.
Signed-off-by: Raghavendra Koushik <raghavendra.koushik@s2io.com>
---
diff -urN vanilla-linux/drivers/net/s2io.c linux-2.6.8.1/drivers/net/s2io.c
--- vanilla-linux/drivers/net/s2io.c 2004-10-11 21:19:25.051771008 -0700
+++ linux-2.6.8.1/drivers/net/s2io.c 2004-10-11 21:19:44.674787856 -0700
@@ -1565,6 +1565,9 @@
atomic_read(&nic->rx_bufs_left[ring_no]);
mac_info_t *mac_control;
struct config_param *config;
+#ifndef CONFIG_S2IO_NAPI
+ unsigned long flags;
+#endif
mac_control = &nic->mac_control;
config = &nic->config;
@@ -1612,6 +1615,12 @@
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
dev->name, rxdp);
}
+#ifndef CONFIG_S2IO_NAPI
+ spin_lock_irqsave(&nic->put_lock, flags);
+ nic->put_pos[ring_no] = (block_no *
+ (MAX_RXDS_PER_BLOCK + 1)) + off;
+ spin_unlock_irqrestore(&nic->put_lock, flags);
+#endif
if (rxdp->Control_1 & RXD_OWN_XENA) {
mac_control->rx_curr_put_info[ring_no].
@@ -1730,8 +1739,8 @@
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
int pkts_to_process = *budget, pkt_cnt = 0;
register u64 val64 = 0;
- rx_curr_get_info_t offset_info;
- int i, block_no;
+ rx_curr_get_info_t get_info, put_info;
+ int i, get_block, put_block, get_offset, put_offset, ring_bufs;
u16 val16, cksum;
struct sk_buff *skb;
RxD_t *rxdp;
@@ -1748,29 +1757,40 @@
writeq(val64, &bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++) {
- if (--pkts_to_process < 0) {
- goto no_rx;
- }
- offset_info = mac_control->rx_curr_get_info[i];
- block_no = offset_info.block_index;
- rxdp = nic->rx_blocks[i][block_no].block_virt_addr +
- offset_info.offset;
- while (!(rxdp->Control_1 & RXD_OWN_XENA)) {
+ get_info = mac_control->rx_curr_get_info[i];
+ get_block = get_info.block_index;
+ put_info = mac_control->rx_curr_put_info[i];
+ put_block = put_info.block_index;
+ ring_bufs = config->rx_cfg[i].num_rxd;
+ rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
+ get_info.offset;
+ get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_info.offset;
+ put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ put_info.offset;
+ while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
+ (((get_offset + 1) % ring_bufs) != put_offset)) {
+ if (--pkts_to_process < 0) {
+ goto no_rx;
+ }
if (rxdp->Control_1 == END_OF_BLOCK) {
rxdp =
(RxD_t *) ((unsigned long) rxdp->
Control_2);
- offset_info.offset++;
- offset_info.offset %=
+ get_info.offset++;
+ get_info.offset %=
(MAX_RXDS_PER_BLOCK + 1);
- block_no++;
- block_no %= nic->block_count[i];
+ get_block++;
+ get_block %= nic->block_count[i];
mac_control->rx_curr_get_info[i].
- offset = offset_info.offset;
+ offset = get_info.offset;
mac_control->rx_curr_get_info[i].
- block_index = block_no;
+ block_index = get_block;
continue;
}
+ get_offset =
+ (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_info.offset;
skb =
(struct sk_buff *) ((unsigned long) rxdp->
Host_Control);
@@ -1778,7 +1798,7 @@
DBG_PRINT(ERR_DBG, "%s: The skb is ",
dev->name);
DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- return 0;
+ goto no_rx;
}
val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
val16 = (u16) (val64 >> 48);
@@ -1792,34 +1812,44 @@
PCI_DMA_FROMDEVICE);
rx_osm_handler(nic, val16, rxdp, i);
pkt_cnt++;
- offset_info.offset++;
- offset_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
+ get_info.offset++;
+ get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
rxdp =
- nic->rx_blocks[i][block_no].block_virt_addr +
- offset_info.offset;
+ nic->rx_blocks[i][get_block].block_virt_addr +
+ get_info.offset;
mac_control->rx_curr_get_info[i].offset =
- offset_info.offset;
+ get_info.offset;
}
}
if (!pkt_cnt)
pkt_cnt = 1;
- for (i = 0; i < config->rx_ring_num; i++)
- fill_rx_buffers(nic, i);
-
dev->quota -= pkt_cnt;
*budget -= pkt_cnt;
netif_rx_complete(dev);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ if (fill_rx_buffers(nic, i) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
+ DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
+ break;
+ }
+ }
/* Re enable the Rx interrupts. */
en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS);
return 0;
no_rx:
- for (i = 0; i < config->rx_ring_num; i++)
- fill_rx_buffers(nic, i);
dev->quota -= pkt_cnt;
*budget -= pkt_cnt;
+
+ for (i = 0; i < config->rx_ring_num; i++) {
+ if (fill_rx_buffers(nic, i) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
+ DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
+ break;
+ }
+ }
return 1;
}
#else
@@ -1840,12 +1870,13 @@
{
struct net_device *dev = (struct net_device *) nic->dev;
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
- rx_curr_get_info_t offset_info;
+ rx_curr_get_info_t get_info, put_info;
RxD_t *rxdp;
struct sk_buff *skb;
u16 val16, cksum;
register u64 val64 = 0;
- int i, block_no, pkt_cnt = 0;
+ int get_block, get_offset, put_block, put_offset, ring_bufs;
+ int i, pkt_cnt = 0;
mac_info_t *mac_control;
struct config_param *config;
@@ -1860,25 +1891,37 @@
writeq(val64, &bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++) {
- offset_info = mac_control->rx_curr_get_info[i];
- block_no = offset_info.block_index;
- rxdp = nic->rx_blocks[i][block_no].block_virt_addr +
- offset_info.offset;
- while (!(rxdp->Control_1 & RXD_OWN_XENA)) {
+ get_info = mac_control->rx_curr_get_info[i];
+ get_block = get_info.block_index;
+ put_info = mac_control->rx_curr_put_info[i];
+ put_block = put_info.block_index;
+ ring_bufs = config->rx_cfg[i].num_rxd;
+ rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
+ get_info.offset;
+ get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_info.offset;
+ spin_lock(&nic->put_lock);
+ put_offset = nic->put_pos[i];
+ spin_unlock(&nic->put_lock);
+ while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
+ (((get_offset + 1) % ring_bufs) != put_offset)) {
if (rxdp->Control_1 == END_OF_BLOCK) {
rxdp = (RxD_t *) ((unsigned long)
rxdp->Control_2);
- offset_info.offset++;
- offset_info.offset %=
+ get_info.offset++;
+ get_info.offset %=
(MAX_RXDS_PER_BLOCK + 1);
- block_no++;
- block_no %= nic->block_count[i];
+ get_block++;
+ get_block %= nic->block_count[i];
mac_control->rx_curr_get_info[i].
- offset = offset_info.offset;
+ offset = get_info.offset;
mac_control->rx_curr_get_info[i].
- block_index = block_no;
+ block_index = get_block;
continue;
}
+ get_offset =
+ (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_info.offset;
skb = (struct sk_buff *) ((unsigned long)
rxdp->Host_Control);
if (skb == NULL) {
@@ -1898,13 +1941,13 @@
HEADER_SNAP_SIZE,
PCI_DMA_FROMDEVICE);
rx_osm_handler(nic, val16, rxdp, i);
- offset_info.offset++;
- offset_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
+ get_info.offset++;
+ get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
rxdp =
- nic->rx_blocks[i][block_no].block_virt_addr +
- offset_info.offset;
+ nic->rx_blocks[i][get_block].block_virt_addr +
+ get_info.offset;
mac_control->rx_curr_get_info[i].offset =
- offset_info.offset;
+ get_info.offset;
pkt_cnt++;
if ((indicate_max_pkts)
&& (pkt_cnt > indicate_max_pkts))
@@ -2575,6 +2618,9 @@
struct net_device *dev = (struct net_device *) dev_id;
nic_t *sp = dev->priv;
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0;
+#ifndef CONFIG_S2IO_NAPI
+ int i, ret;
+#endif
u64 reason = 0;
mac_info_t *mac_control;
struct config_param *config;
@@ -2626,44 +2672,31 @@
* reallocate the buffers from the interrupt handler itself,
* else schedule a tasklet to reallocate the buffers.
*/
-#if 1
- {
- int i;
-
- for (i = 0; i < config->rx_ring_num; i++) {
- int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
- int level = rx_buffer_level(sp, rxb_size, i);
-
- if ((level == PANIC) && (!TASKLET_IN_USE)) {
- int ret;
+#ifndef CONFIG_S2IO_NAPI
+ for (i = 0; i < config->rx_ring_num; i++) {
+ int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
+ int level = rx_buffer_level(sp, rxb_size, i);
- DBG_PRINT(INTR_DBG, "%s: Rx BD hit ",
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory",
dev->name);
- DBG_PRINT(INTR_DBG, "PANIC levels\n");
- if ((ret =
- fill_rx_buffers(sp, i)) == -ENOMEM) {
- DBG_PRINT(ERR_DBG,
- "%s:Out of memory",
- dev->name);
- DBG_PRINT(ERR_DBG, " in ISR!!\n");
- clear_bit(0,
- (unsigned long *) (&sp->
- tasklet_status));
- return IRQ_HANDLED;
- }
+ DBG_PRINT(ERR_DBG, " in ISR!!\n");
clear_bit(0,
(unsigned long *) (&sp->
tasklet_status));
- } else if ((level == LOW)
- && (!atomic_read(&sp->tasklet_status))) {
- tasklet_schedule(&sp->task);
+ return IRQ_HANDLED;
}
-
+ clear_bit(0,
+ (unsigned long *) (&sp->tasklet_status));
+ } else if ((level == LOW)
+ && (!atomic_read(&sp->tasklet_status))) {
+ tasklet_schedule(&sp->task);
}
}
-#else
- tasklet_schedule(&sp->task);
#endif
return IRQ_HANDLED;
@@ -4583,6 +4616,9 @@
/* Initialize spinlocks */
spin_lock_init(&sp->tx_lock);
+#ifndef CONFIG_S2IO_NAPI
+ spin_lock_init(&sp->put_lock);
+#endif
/*
* SXE-002: Configure link and activity LED to init state
diff -urN vanilla-linux/drivers/net/s2io.h linux-2.6.8.1/drivers/net/s2io.h
--- vanilla-linux/drivers/net/s2io.h 2004-10-11 21:19:25.051771008 -0700
+++ linux-2.6.8.1/drivers/net/s2io.h 2004-10-11 21:19:44.674787856 -0700
@@ -610,6 +610,9 @@
atomic_t rx_bufs_left[MAX_RX_RINGS];
spinlock_t tx_lock;
+#ifndef CONFIG_S2IO_NAPI
+ spinlock_t put_lock;
+#endif
#define PROMISC 1
#define ALL_MULTI 2
@@ -628,6 +631,11 @@
u16 tx_err_count;
u16 rx_err_count;
+#ifndef CONFIG_S2IO_NAPI
+ /* Index to the absolute position of the put pointer of Rx ring. */
+ int put_pos[MAX_RX_RINGS];
+#endif
+
/*
* Place holders for the virtual and physical addresses of
* all the Rx Blocks
next reply other threads:[~2004-10-28 18:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-28 18:34 Ravinandan Arakali [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-10-28 22:50 [PATCH 2.6.9-rc2 7/12] S2io: NAPI fix Ravinandan Arakali
2004-11-08 16:15 raghavendra.koushik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001301c4bd1c$cf5a44b0$9810100a@S2IOtech.com' \
--to=ravinandan.arakali@s2io.com \
--cc=alicia.pena@s2io.com \
--cc=jgarzik@pobox.com \
--cc=leonid.grossman@s2io.com \
--cc=netdev@oss.sgi.com \
--cc=raghavendra.koushik@s2io.com \
--cc=rapuru.sriram@s2io.com \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).