From: Eric Joyner <eric.joyner@amd.com>
To: Gustavo Arantes <dev.gustavoa@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
nic_swsd@realtek.com
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Javen Xu <javen_xu@realsil.com.cn>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v2] r8169: expose software counters through netdev qstats
Date: Mon, 27 Apr 2026 14:45:06 -0700 [thread overview]
Message-ID: <005e4fb2-c108-42c0-b560-a40cb259864a@amd.com> (raw)
In-Reply-To: <20260427205931.5884-1-dev.gustavoa@gmail.com>
On 4/27/2026 1:59 PM, Gustavo Arantes wrote:
> r8169 maintains synchronized per-CPU software counters for packet and
> byte accounting and exposes them through ndo_get_stats64(), but
> userspace using the structured netdev qstats API cannot retrieve them from
> this driver.
>
> Expose the same counters through netdev_stat_ops. r8169 has a single Rx
> and Tx queue, so report the accumulated counters on queue 0. Use zero
> base stats so device-scope qstats are derived from the queue counters
> and match the packet and byte values reported through RTNL.
>
> This does not add new accounting and does not touch the data path. It
> only makes the existing counters available through the common qstats
> interface, which lets generic userspace tooling query r8169 the same way
> it queries other drivers with qstats support.
>
> Signed-off-by: Gustavo Arantes <dev.gustavoa@gmail.com>
> ---
> v2:
> - Submit again now that net-next has reopened.
> - Expand commit message to explain the qstats userspace benefit.
>
> Tested on a Realtek RTL8111/8168/8211/8411 PCIe Gigabit Ethernet
> controller using the r8169 driver.
>
> v1: https://lore.kernel.org/netdev/20260418021232.5425-1-dev.gustavoa@gmail.com/
>
> drivers/net/ethernet/realtek/r8169_main.c | 70 +++++++++++++++++++++++
> 1 file changed, 70 insertions(+)
>
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 791277e750ba..9d833b446383 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -5175,6 +5175,75 @@ rtl8169_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
> pm_runtime_put_noidle(&pdev->dev);
> }
>
> +static void rtl8169_fetch_sw_stats(struct net_device *dev,
> + struct netdev_queue_stats_rx *rx,
> + struct netdev_queue_stats_tx *tx)
> +{
> + const struct pcpu_sw_netstats *stats;
> + unsigned int start;
> + int cpu;
> +
> + for_each_possible_cpu(cpu) {
> + u64 rx_packets, rx_bytes, tx_packets, tx_bytes;
> +
> + stats = per_cpu_ptr(dev->tstats, cpu);
> + do {
> + start = u64_stats_fetch_begin(&stats->syncp);
> + rx_packets = u64_stats_read(&stats->rx_packets);
> + rx_bytes = u64_stats_read(&stats->rx_bytes);
> + tx_packets = u64_stats_read(&stats->tx_packets);
> + tx_bytes = u64_stats_read(&stats->tx_bytes);
> + } while (u64_stats_fetch_retry(&stats->syncp, start));
> +
> + rx->packets += rx_packets;
> + rx->bytes += rx_bytes;
> + tx->packets += tx_packets;
> + tx->bytes += tx_bytes;
> + }
> +}
> +
> +static void rtl8169_get_queue_stats_rx(struct net_device *dev, int idx,
> + struct netdev_queue_stats_rx *rx)
> +{
> + struct netdev_queue_stats_tx tx = {};
> +
> + if (idx)
> + return;
> +
> + rx->packets = 0;
> + rx->bytes = 0;
> + rtl8169_fetch_sw_stats(dev, rx, &tx);
> +}
> +
> +static void rtl8169_get_queue_stats_tx(struct net_device *dev, int idx,
> + struct netdev_queue_stats_tx *tx)
> +{
> + struct netdev_queue_stats_rx rx = {};
> +
> + if (idx)
> + return;
> +
> + tx->packets = 0;
> + tx->bytes = 0;
> + rtl8169_fetch_sw_stats(dev, &rx, tx);
> +}
> +
> +static void rtl8169_get_base_stats(struct net_device *dev,
> + struct netdev_queue_stats_rx *rx,
> + struct netdev_queue_stats_tx *tx)
> +{
> + rx->packets = 0;
> + rx->bytes = 0;
> + tx->packets = 0;
> + tx->bytes = 0;
> +}
> +
> +static const struct netdev_stat_ops rtl8169_stat_ops = {
> + .get_queue_stats_rx = rtl8169_get_queue_stats_rx,
> + .get_queue_stats_tx = rtl8169_get_queue_stats_tx,
> + .get_base_stats = rtl8169_get_base_stats,
> +};
> +
> static void rtl8169_net_suspend(struct rtl8169_private *tp)
> {
> netif_device_detach(tp->dev);
> @@ -5615,6 +5684,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> SET_NETDEV_DEV(dev, &pdev->dev);
> dev->netdev_ops = &rtl_netdev_ops;
> + dev->stat_ops = &rtl8169_stat_ops;
> tp = netdev_priv(dev);
> tp->dev = dev;
> tp->pci_dev = pdev;
> --
> 2.54.0
>
The comment for struct netdev_stat_ops says:
> * Device drivers are encouraged to reset the per-queue statistics when
> * number of queues change. This is because the primary use case for
> * per-queue statistics is currently to detect traffic imbalance.
But the commit message says there's only one Tx/Rx queue. Then that makes
this patch nonsensical? What is this actually for?
- Eric
prev parent reply other threads:[~2026-04-27 21:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-27 20:59 [PATCH net-next v2] r8169: expose software counters through netdev qstats Gustavo Arantes
2026-04-27 21:21 ` Heiner Kallweit
2026-04-27 21:35 ` Gustavo Arantes
2026-04-27 21:45 ` Eric Joyner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=005e4fb2-c108-42c0-b560-a40cb259864a@amd.com \
--to=eric.joyner@amd.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=dev.gustavoa@gmail.com \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=javen_xu@realsil.com.cn \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox