netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Jiawen Wu" <jiawenwu@trustnetic.com>
To: "'Andrew Lunn'" <andrew@lunn.ch>
Cc: <netdev@vger.kernel.org>, <mengyuanlou@net-swift.com>
Subject: RE: [PATCH net-next v2 03/16] net: txgbe: Set MAC address and register netdev
Date: Thu, 22 Sep 2022 17:58:55 +0800	[thread overview]
Message-ID: <016a01d8ce69$ed6a6350$c83f29f0$@trustnetic.com> (raw)
In-Reply-To: <Yw6zNh+TTGyfBzSV@lunn.ch>

On Wednesday, August 31, 2022 9:03 AM, Andrew Lunn wrote:
> > +struct txgbe_ring {
> > +	u8 reg_idx;
> > +} ____cacheline_internodealigned_in_smp;
> 
> Am i right in thinking that is one byte actually takes up one L3 cache
line?
> 
> >  struct txgbe_adapter {
> >  	u8 __iomem *io_addr;    /* Mainly for iounmap use */
> > @@ -18,11 +35,33 @@ struct txgbe_adapter {
> >  	struct net_device *netdev;
> >  	struct pci_dev *pdev;
> >
> > +	/* Tx fast path data */
> > +	int num_tx_queues;
> > +
> > +	/* TX */
> > +	struct txgbe_ring *tx_ring[TXGBE_MAX_TX_QUEUES]
> > +____cacheline_aligned_in_smp;
> > +
> 
> I assume this causes tx_ring to be aligned to a cache line. Have you use
pahole
> to see how much space you are wasting? Can some of the other members be
> moved around to reduce the waste? Generally, try to arrange everything for
RX
> on one cache line, everything for TX on another cache line.
> 

More members will be added to 'struct txgbe_ring', but this current patch
only adds one byte 'reg_idx'.
I will postpone it until the actual need to add.

> > +void txgbe_set_rar(struct txgbe_hw *hw, u32 index, u8 *addr, u64 pools,
> > +		   u32 enable_addr)
> > +{
> > +	u32 rar_entries = hw->mac.num_rar_entries;
> > +	u32 rar_low, rar_high;
> > +
> > +	/* Make sure we are using a valid rar index range */
> > +	if (index >= rar_entries) {
> > +		txgbe_info(hw, "RAR index %d is out of range.\n", index);
> > +		return;
> > +	}
> > +
> > +	/* select the MAC address */
> > +	wr32(hw, TXGBE_PSR_MAC_SWC_IDX, index);
> > +
> > +	/* setup VMDq pool mapping */
> > +	wr32(hw, TXGBE_PSR_MAC_SWC_VM_L, pools & 0xFFFFFFFF);
> > +	wr32(hw, TXGBE_PSR_MAC_SWC_VM_H, pools >> 32);
> > +
> > +	/* HW expects these in little endian so we reverse the byte
> > +	 * order from network order (big endian) to little endian
> 
> And what happens when the machine is already little endian?
> 

It is not evaluated here, so it doesn't matter what the machine's byte order
is.



  reply	other threads:[~2022-09-22  9:59 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-30  7:04 [PATCH net-next v2 00/16] net: WangXun txgbe ethernet driver Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 01/16] net: txgbe: Store PCI info Jiawen Wu
2022-08-31  0:06   ` Andrew Lunn
2022-08-31  2:20     ` Jiawen Wu
2022-08-31 23:59       ` Andrew Lunn
2022-08-30  7:04 ` [PATCH net-next v2 02/16] net: txgbe: Reset hardware Jiawen Wu
2022-08-31  0:39   ` Andrew Lunn
2022-08-31  2:54     ` Jiawen Wu
2022-09-01  0:03       ` Andrew Lunn
2022-08-30  7:04 ` [PATCH net-next v2 03/16] net: txgbe: Set MAC address and register netdev Jiawen Wu
2022-08-31  1:02   ` Andrew Lunn
2022-09-22  9:58     ` Jiawen Wu [this message]
2022-08-30  7:04 ` [PATCH net-next v2 04/16] net: txgbe: Add operations to interact with firmware Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 05/16] net: txgbe: Identify PHY and SFP module Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 06/16] net: txgbe: Initialize service task Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 07/16] net: txgbe: Support to setup link Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 08/16] net: txgbe: Add interrupt support Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 09/16] net: txgbe: Handle various event interrupts Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 10/16] net: txgbe: Configure Rx and Tx unit of the MAC Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 11/16] net: txgbe: Allocate Rx and Tx resources Jiawen Wu
2022-08-30 23:31   ` kernel test robot
2022-08-30  7:04 ` [PATCH net-next v2 12/16] net: txgbe: Add Rx and Tx cleanup routine Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 13/16] net: txgbe: Add device Rx features Jiawen Wu
2022-09-03 19:50   ` kernel test robot
2022-08-30  7:04 ` [PATCH net-next v2 14/16] net: txgbe: Add transmit path to process packets Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 15/16] net: txgbe: Support to get system network statistics Jiawen Wu
2022-08-30  7:04 ` [PATCH net-next v2 16/16] net: txgbe: support to respond Tx hang Jiawen Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='016a01d8ce69$ed6a6350$c83f29f0$@trustnetic.com' \
    --to=jiawenwu@trustnetic.com \
    --cc=andrew@lunn.ch \
    --cc=mengyuanlou@net-swift.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).