Re: [PATCH net-next v3 05/13] ax88179_178a: Use phylink in get/set_link_ksettings

[Andrew Lunn <andrew@lunn.ch>]

On Fri, Jul 24, 2026 at 09:36:48AM +0200, Birger Koblitz wrote:
> The PHYs in the AX179A-based USB-Ethernet controllers can be configured
> via phylink. Use this for link configuration.
> 
> Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
> ---
>  drivers/net/usb/ax88179_178a.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> index 2e2f96a97b8398ece7d70cf349c7db973959629f..136d1d39bf78658758d35372d4a9486e21befd87 100644
> --- a/drivers/net/usb/ax88179_178a.c
> +++ b/drivers/net/usb/ax88179_178a.c
> @@ -967,9 +967,15 @@ ax88179_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
>  }
>  
>  static int ax88179_get_link_ksettings(struct net_device *net,
> -				      struct ethtool_link_ksettings *cmd)
> +				       struct ethtool_link_ksettings *cmd)
>  {
>  	struct usbnet *dev = netdev_priv(net);
> +	struct ax88179_data *data;
> +
> +	data = dev->driver_priv;
> +
> +	if (data->phylink)

When did this appear? Am i missing a patch somewhere?

     Andrew