From mboxrd@z Thu Jan 1 00:00:00 1970 From: "chaithrika" Subject: RE: [PATCH v2] net-next-2.6: TI DaVinci EMAC driver Date: Thu, 21 May 2009 16:59:45 +0530 Message-ID: <044201c9da07$716aa310$543fe930$@com> References: <1242646472-13422-1-git-send-email-chaithrika@ti.com> <20090518.151954.121982430.davem@davemloft.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: , , , , To: "'David Miller'" Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:52397 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752493AbZEULaX (ORCPT ); Thu, 21 May 2009 07:30:23 -0400 In-Reply-To: <20090518.151954.121982430.davem@davemloft.net> Content-Language: en-us Sender: netdev-owner@vger.kernel.org List-ID: David, > -----Original Message----- > From: David Miller [mailto:davem@davemloft.net] > Sent: Tuesday, May 19, 2009 3:50 AM > To: chaithrika@ti.com > Cc: netdev@vger.kernel.org; davinci-linux-open- > source@linux.davincidsp.com; nsekahr@ti.com; anantgole@ti.com; > khilman@deeprootsystems.com > Subject: Re: [PATCH v2] net-next-2.6: TI DaVinci EMAC driver > > From: Chaithrika U S > Date: Mon, 18 May 2009 07:34:32 -0400 > > > Add support for TI DaVinci EMAC driver. > > > > TI DaVinci Ethernet Media Access Controller module is based upon > > TI CPPI 3.0 DMA engine and supports 10/100 Mbps on all and Gigabit > modes on > > some TI devices. It supports MII/RMII and has up to 8Kbytes of > internal > > descriptor memory. This driver has been working on several TI devices > including > > DM644x, DM646x and DA830 platforms. The specs of this device are > available at: > > http://www.ti.com/litv/pdf/sprue24a > > > > Signed-off-by: Anant Gole > > Signed-off-by: Kevin Hilman > > Signed-off-by: Chaithrika U S > > Applied, thanks. > Thanks. > BTW, DECLARE_MAC_BUF(), print_mac() et al. is deprecated, you can > simply use the printf format specifier "%pM" to print MAC addresses > directly. OK. Will submit a patch for this. Regards, Chaithrika