From: Wojciech Drewek <wojciech.drewek@intel.com>
To: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>, <netdev@vger.kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>,
<linux-kernel@vger.kernel.org>, <bryan.whitehead@microchip.com>,
<andrew@lunn.ch>, <linux@armlinux.org.uk>, <sbauer@blackbox.su>,
<hmehrtens@maxlinear.com>, <lxu@maxlinear.com>,
<hkallweit1@gmail.com>, <edumazet@google.com>,
<pabeni@redhat.com>, <UNGLinuxDriver@microchip.com>
Subject: Re: [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config_init
Date: Wed, 5 Jun 2024 13:24:50 +0200 [thread overview]
Message-ID: <05146417-c29b-41f4-89ac-bc9e1af2cee7@intel.com> (raw)
In-Reply-To: <20240605101611.18791-4-Raju.Lakkaraju@microchip.com>
On 05.06.2024 12:16, Raju Lakkaraju wrote:
> When the system resumes from sleep, the phy_init_hw() function invokes
> config_init(), which clears all interrupt masks and causes wake events to be
> lost in subsequent wake sequences. Remove interrupt mask clearing from
> config_init() and preserve relevant masks in config_intr()
>
> Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
> ---
One nit, other than that:
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
> Change List:
> ------------
> V0 -> V3:
> - Address the https://lore.kernel.org/lkml/4a565d54-f468-4e32-8a2c-102c1203f72c@lunn.ch/T/
> review comments
>
> drivers/net/phy/mxl-gpy.c | 58 +++++++++++++++++++++++++--------------
> 1 file changed, 38 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
> index b2d36a3a96f1..e5f8ac4b4604 100644
> --- a/drivers/net/phy/mxl-gpy.c
> +++ b/drivers/net/phy/mxl-gpy.c
> @@ -107,6 +107,7 @@ struct gpy_priv {
>
> u8 fw_major;
> u8 fw_minor;
> + u32 wolopts;
>
> /* It takes 3 seconds to fully switch out of loopback mode before
> * it can safely re-enter loopback mode. Record the time when
> @@ -221,6 +222,15 @@ static int gpy_hwmon_register(struct phy_device *phydev)
> }
> #endif
>
> +static int gpy_ack_interrupt(struct phy_device *phydev)
> +{
> + int ret;
> +
> + /* Clear all pending interrupts */
> + ret = phy_read(phydev, PHY_ISTAT);
> + return ret < 0 ? ret : 0;
Can we just return phy_read?
> +}
> +
> static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
> {
> struct gpy_priv *priv = phydev->priv;
> @@ -262,16 +272,8 @@ static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
>
> static int gpy_config_init(struct phy_device *phydev)
> {
> - int ret;
> -
> - /* Mask all interrupts */
> - ret = phy_write(phydev, PHY_IMASK, 0);
> - if (ret)
> - return ret;
> -
> - /* Clear all pending interrupts */
> - ret = phy_read(phydev, PHY_ISTAT);
> - return ret < 0 ? ret : 0;
> + /* Nothing to configure. Configuration Requirement Placeholder */
> + return 0;
> }
>
> static int gpy21x_config_init(struct phy_device *phydev)
> @@ -627,11 +629,23 @@ static int gpy_read_status(struct phy_device *phydev)
>
> static int gpy_config_intr(struct phy_device *phydev)
> {
> + struct gpy_priv *priv = phydev->priv;
> u16 mask = 0;
> + int ret;
> +
> + ret = gpy_ack_interrupt(phydev);
> + if (ret)
> + return ret;
>
> if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> mask = PHY_IMASK_MASK;
>
> + if (priv->wolopts & WAKE_MAGIC)
> + mask |= PHY_IMASK_WOL;
> +
> + if (priv->wolopts & WAKE_PHY)
> + mask |= PHY_IMASK_LSTC;
> +
> return phy_write(phydev, PHY_IMASK, mask);
> }
>
> @@ -678,6 +692,7 @@ static int gpy_set_wol(struct phy_device *phydev,
> struct ethtool_wolinfo *wol)
> {
> struct net_device *attach_dev = phydev->attached_dev;
> + struct gpy_priv *priv = phydev->priv;
> int ret;
>
> if (wol->wolopts & WAKE_MAGIC) {
> @@ -725,6 +740,8 @@ static int gpy_set_wol(struct phy_device *phydev,
> ret = phy_read(phydev, PHY_ISTAT);
> if (ret < 0)
> return ret;
> +
> + priv->wolopts |= WAKE_MAGIC;
> } else {
> /* Disable magic packet matching */
> ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
> @@ -732,6 +749,13 @@ static int gpy_set_wol(struct phy_device *phydev,
> WOL_EN);
> if (ret < 0)
> return ret;
> +
> + /* Disable the WOL interrupt */
> + ret = phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_WOL);
> + if (ret < 0)
> + return ret;
> +
> + priv->wolopts &= ~WAKE_MAGIC;
> }
>
> if (wol->wolopts & WAKE_PHY) {
> @@ -748,9 +772,11 @@ static int gpy_set_wol(struct phy_device *phydev,
> if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC))
> phy_trigger_machine(phydev);
>
> + priv->wolopts |= WAKE_PHY;
> return 0;
> }
>
> + priv->wolopts &= ~WAKE_PHY;
> /* Disable the link state change interrupt */
> return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
> }
> @@ -758,18 +784,10 @@ static int gpy_set_wol(struct phy_device *phydev,
> static void gpy_get_wol(struct phy_device *phydev,
> struct ethtool_wolinfo *wol)
> {
> - int ret;
> + struct gpy_priv *priv = phydev->priv;
>
> wol->supported = WAKE_MAGIC | WAKE_PHY;
> - wol->wolopts = 0;
> -
> - ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL);
> - if (ret & WOL_EN)
> - wol->wolopts |= WAKE_MAGIC;
> -
> - ret = phy_read(phydev, PHY_IMASK);
> - if (ret & PHY_IMASK_LSTC)
> - wol->wolopts |= WAKE_PHY;
> + wol->wolopts = priv->wolopts;
> }
>
> static int gpy_loopback(struct phy_device *phydev, bool enable)
next prev parent reply other threads:[~2024-06-05 11:25 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 10:16 [PATCH net V3 0/3] net: lan743x: Fixes for multiple WOL related issues Raju Lakkaraju
2024-06-05 10:16 ` [PATCH net V3 1/3] net: lan743x: disable WOL upon resume to restore full data path operation Raju Lakkaraju
2024-06-05 11:18 ` Wojciech Drewek
2024-06-05 10:16 ` [PATCH net V3 2/3] net: lan743x: Support WOL at both the PHY and MAC appropriately Raju Lakkaraju
2024-06-05 11:20 ` Wojciech Drewek
2024-06-05 14:56 ` kernel test robot
2024-06-06 10:22 ` Raju Lakkaraju
2024-06-06 13:30 ` Andrew Lunn
2024-06-07 6:46 ` Raju Lakkaraju
2024-06-11 6:27 ` [PATCH net V3 0/3] net: lan743x: Fixes for multiple WOL related issues Raju Lakkaraju
2024-06-11 6:27 ` [PATCH net V3 1/3] net: lan743x: disable WOL upon resume to restore full data path operation Raju Lakkaraju
2024-06-11 6:27 ` [PATCH net V3 2/3] net: lan743x: Support WOL at both the PHY and MAC appropriately Raju Lakkaraju
2024-06-11 6:27 ` [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config_init Raju Lakkaraju
2024-06-11 7:10 ` [PATCH net V3 0/3] net: lan743x: Fixes for multiple WOL related issues Horatiu Vultur
2024-06-11 8:01 ` Raju Lakkaraju
2024-06-11 10:45 ` Horatiu Vultur
2024-06-05 22:25 ` [PATCH net V3 2/3] net: lan743x: Support WOL at both the PHY and MAC appropriately kernel test robot
2024-06-06 10:30 ` Raju Lakkaraju
2024-06-05 10:16 ` [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config_init Raju Lakkaraju
2024-06-05 11:24 ` Wojciech Drewek [this message]
2024-06-06 6:41 ` Raju Lakkaraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=05146417-c29b-41f4-89ac-bc9e1af2cee7@intel.com \
--to=wojciech.drewek@intel.com \
--cc=Raju.Lakkaraju@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=bryan.whitehead@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=hmehrtens@maxlinear.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lxu@maxlinear.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sbauer@blackbox.su \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).