netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joao Pinto <Joao.Pinto@synopsys.com>
To: davem@davemloft.net
Cc: peppe.cavallaro@st.com, alexandre.torgue@st.com,
	niklas.cassel@axis.com, netdev@vger.kernel.org,
	Joao Pinto <Joao.Pinto@synopsys.com>
Subject: [PATCH v4 net-next 2/9] net: stmicro: configure mtl rx and tx algorithms
Date: Fri, 10 Mar 2017 12:18:27 +0000	[thread overview]
Message-ID: <09aae9af3afa2685c282bae60b7172d4dff45a0c.1489146580.git.jpinto@synopsys.com> (raw)
In-Reply-To: <cover.1489146580.git.jpinto@synopsys.com>
In-Reply-To: <cover.1489146580.git.jpinto@synopsys.com>

This patch adds the RX and TX scheduling algorithms programming.
It introduces the multiple queues configuration function
(stmmac_mtl_configuration) in stmmac_main.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v3->v4:
- Just to keep up with patch-set version
Changes v2->v3:
- Switch statements with a tab
Changes v1->v2:
- Just to keep up with patch-set version

 drivers/net/ethernet/stmicro/stmmac/common.h      |  4 ++
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h      | 10 +++++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 48 +++++++++++++++++++++++
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 31 +++++++++++++--
 4 files changed, 90 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 04d9245..5a0a781 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -455,6 +455,10 @@ struct stmmac_ops {
 	int (*rx_ipc)(struct mac_device_info *hw);
 	/* Enable RX Queues */
 	void (*rx_queue_enable)(struct mac_device_info *hw, u32 queue);
+	/* Program RX Algorithms */
+	void (*prog_mtl_rx_algorithms)(struct mac_device_info *hw, u32 rx_alg);
+	/* Program TX Algorithms */
+	void (*prog_mtl_tx_algorithms)(struct mac_device_info *hw, u32 tx_alg);
 	/* Dump MAC registers */
 	void (*dump_regs)(struct mac_device_info *hw, u32 *reg_space);
 	/* Handle extra events on specific interrupts hw dependent */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index db45134..748ab6f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -161,6 +161,16 @@ enum power_event {
 #define GMAC_HI_REG_AE			BIT(31)
 
 /*  MTL registers */
+#define MTL_OPERATION_MODE		0x00000c00
+#define MTL_OPERATION_SCHALG_MASK	GENMASK(6, 5)
+#define MTL_OPERATION_SCHALG_WRR	(0x0 << 5)
+#define MTL_OPERATION_SCHALG_WFQ	(0x1 << 5)
+#define MTL_OPERATION_SCHALG_DWRR	(0x2 << 5)
+#define MTL_OPERATION_SCHALG_SP		(0x3 << 5)
+#define MTL_OPERATION_RAA		BIT(2)
+#define MTL_OPERATION_RAA_SP		(0x0 << 2)
+#define MTL_OPERATION_RAA_WSP		(0x1 << 2)
+
 #define MTL_INT_STATUS			0x00000c20
 #define MTL_INT_Q0			BIT(0)
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 1e79e65..f966755 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -70,6 +70,52 @@ static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 queue)
 	writel(value, ioaddr + GMAC_RXQ_CTRL0);
 }
 
+static void dwmac4_prog_mtl_rx_algorithms(struct mac_device_info *hw,
+					  u32 rx_alg)
+{
+	void __iomem *ioaddr = hw->pcsr;
+	u32 value = readl(ioaddr + MTL_OPERATION_MODE);
+
+	value &= ~MTL_OPERATION_RAA;
+	switch (rx_alg) {
+	case MTL_RX_ALGORITHM_SP:
+		value |= MTL_OPERATION_RAA_SP;
+		break;
+	case MTL_RX_ALGORITHM_WSP:
+		value |= MTL_OPERATION_RAA_WSP;
+		break;
+	default:
+		break;
+	}
+
+	writel(value, ioaddr + MTL_OPERATION_MODE);
+}
+
+static void dwmac4_prog_mtl_tx_algorithms(struct mac_device_info *hw,
+					  u32 tx_alg)
+{
+	void __iomem *ioaddr = hw->pcsr;
+	u32 value = readl(ioaddr + MTL_OPERATION_MODE);
+
+	value &= ~MTL_OPERATION_SCHALG_MASK;
+	switch (tx_alg) {
+	case MTL_TX_ALGORITHM_WRR:
+		value |= MTL_OPERATION_SCHALG_WRR;
+		break;
+	case MTL_TX_ALGORITHM_WFQ:
+		value |= MTL_OPERATION_SCHALG_WFQ;
+		break;
+	case MTL_TX_ALGORITHM_DWRR:
+		value |= MTL_OPERATION_SCHALG_DWRR;
+		break;
+	case MTL_TX_ALGORITHM_SP:
+		value |= MTL_OPERATION_SCHALG_SP;
+		break;
+	default:
+		break;
+	}
+}
+
 static void dwmac4_dump_regs(struct mac_device_info *hw, u32 *reg_space)
 {
 	void __iomem *ioaddr = hw->pcsr;
@@ -457,6 +503,8 @@ static const struct stmmac_ops dwmac4_ops = {
 	.core_init = dwmac4_core_init,
 	.rx_ipc = dwmac4_rx_ipc_enable,
 	.rx_queue_enable = dwmac4_rx_queue_enable,
+	.prog_mtl_rx_algorithms = dwmac4_prog_mtl_rx_algorithms,
+	.prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms,
 	.dump_regs = dwmac4_dump_regs,
 	.host_irq_status = dwmac4_irq_status,
 	.flow_ctrl = dwmac4_flow_ctrl,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4498a38..af57f8d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1645,6 +1645,31 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
 }
 
 /**
+ *  stmmac_mtl_configuration - Configure MTL
+ *  @priv: driver private structure
+ *  Description: It is used for configurring MTL
+ */
+static void stmmac_mtl_configuration(struct stmmac_priv *priv)
+{
+	u32 rx_queues_count = priv->plat->rx_queues_to_use;
+	u32 tx_queues_count = priv->plat->tx_queues_to_use;
+
+	/* Configure MTL RX algorithms */
+	if (rx_queues_count > 1 && priv->hw->mac->prog_mtl_rx_algorithms)
+		priv->hw->mac->prog_mtl_rx_algorithms(priv->hw,
+						priv->plat->rx_sched_algorithm);
+
+	/* Configure MTL TX algorithms */
+	if (tx_queues_count > 1 && priv->hw->mac->prog_mtl_tx_algorithms)
+		priv->hw->mac->prog_mtl_tx_algorithms(priv->hw,
+						priv->plat->tx_sched_algorithm);
+
+	/* Enable MAC RX Queues */
+	if (rx_queues_count > 1 && priv->hw->mac->rx_queue_enable)
+		stmmac_mac_enable_rx_queues(priv);
+}
+
+/**
  * stmmac_hw_setup - setup mac in a usable state.
  *  @dev : pointer to the device structure.
  *  Description:
@@ -1688,9 +1713,9 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 	/* Initialize the MAC Core */
 	priv->hw->mac->core_init(priv->hw, dev->mtu);
 
-	/* Initialize MAC RX Queues */
-	if (priv->hw->mac->rx_queue_enable)
-		stmmac_mac_enable_rx_queues(priv);
+	/* Initialize MTL*/
+	if (priv->synopsys_id >= DWMAC_CORE_4_00)
+		stmmac_mtl_configuration(priv);
 
 	ret = priv->hw->mac->rx_ipc(priv->hw);
 	if (!ret) {
-- 
2.9.3

  parent reply	other threads:[~2017-03-10 12:18 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-10 12:18 [PATCH v4 net-next 0/9] prepare mac operations for multiple queues Joao Pinto
2017-03-10 12:18 ` [PATCH v4 net-next 1/9] net: stmicro: multiple queues dt configuration Joao Pinto
2017-03-10 12:18 ` Joao Pinto [this message]
2017-03-10 12:18 ` [PATCH v4 net-next 3/9] net: stmicro: configure tx queue weight Joao Pinto
2017-03-10 12:18 ` [PATCH v4 net-next 4/9] net: stmicro: mtl rx queue enabled as dcb or avb Joao Pinto
2017-03-10 12:18 ` [PATCH v4 net-next 5/9] net: stmicro: mapping mtl rx to dma channel Joao Pinto
2017-03-10 12:18 ` [PATCH v4 net-next 6/9] net: stmicro: flow_ctrl functions adapted to mtl Joao Pinto
2017-03-10 12:18 ` [PATCH v4 net-next 7/9] net: stmicro: prepare irq_status for mtl Joao Pinto
2017-03-10 12:18 ` [PATCH v4 net-next 8/9] net: stmicro: mac debug prepared for multiple queues Joao Pinto
2017-03-10 12:18 ` [PATCH v4 net-next 9/9] net: stmicro: configuration of CBS in case of a TX AVB queue Joao Pinto
2017-03-10 17:50 ` [PATCH v4 net-next 0/9] prepare mac operations for multiple queues David Miller
2017-03-10 18:00   ` Joao Pinto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=09aae9af3afa2685c282bae60b7172d4dff45a0c.1489146580.git.jpinto@synopsys.com \
    --to=joao.pinto@synopsys.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=niklas.cassel@axis.com \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).