From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Maciek Machnikowski <maciek@machnikowski.net>, netdev@vger.kernel.org
Cc: kuba@kernel.org, richardcochran@gmail.com,
milena.olech@intel.com, willemdebruijn.kernel@gmail.com,
andrew@lunn.ch, horms@kernel.org
Subject: Re: [PATCH v8 net-next 2/3] netdevsim: Implement basic ptp support
Date: Wed, 12 Aug 2026 21:35:11 +0100 [thread overview]
Message-ID: <0b4ca607-9e50-48e7-a016-c1b829a37250@linux.dev> (raw)
In-Reply-To: <20260812183708.312412-3-maciek@machnikowski.net>
On 12.08.2026 19:37, Maciek Machnikowski wrote:
> Add support for virtual timestamping inside the netdevsim driver.
> The implementation uses two attached ptp_mock clocks, reads the timestamps
> of the ones attached either to the netdevsim or its peer and returns
> timestamps using standard timestamps APIs.
>
> This implementation enables running ptp4l on netdevsim adapters and
> introduces a new ptp selftest.
>
> Co-developed-by: Milena Olech <milena.olech@intel.com>
> Signed-off-by: Milena Olech <milena.olech@intel.com>
> Signed-off-by: Maciek Machnikowski <maciek@machnikowski.net>
[...]
>
> +static int nsim_set_ts_config(struct net_device *netdev,
> + struct kernel_hwtstamp_config *config,
> + struct netlink_ext_ack *extack)
> +{
> + struct netdevsim *ns = netdev_priv(netdev);
> + int rx_filter;
> +
> + if (!ns->phc)
> + return -EOPNOTSUPP;
> +
> + switch (config->tx_type) {
> + case HWTSTAMP_TX_OFF:
> + WRITE_ONCE(ns->tstamp_config.tx_type, HWTSTAMP_TX_OFF);
> + break;
> + case HWTSTAMP_TX_ON:
> + WRITE_ONCE(ns->tstamp_config.tx_type, HWTSTAMP_TX_ON);
> + break;
> + default:
> + return -ERANGE;
> + }
> +
> + switch (config->rx_filter) {
> + case HWTSTAMP_FILTER_NONE:
> + rx_filter = HWTSTAMP_FILTER_NONE;
> + break;
> + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
> + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
> + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
> + case HWTSTAMP_FILTER_PTP_V2_EVENT:
> + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
> + case HWTSTAMP_FILTER_PTP_V2_SYNC:
> + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
> + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
> + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
> + case HWTSTAMP_FILTER_NTP_ALL:
> + case HWTSTAMP_FILTER_ALL:
> + rx_filter = HWTSTAMP_FILTER_ALL;
> + break;
> + default:
> + return -ERANGE;
> + }
nit: technically, you can make sashiko silent in this case by simply swapping
switch statments order :)
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
next prev parent reply other threads:[~2026-08-12 20:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-12 18:37 [PATCH v8 net-next 0/3] Implement PTP support in netdevsim Maciek Machnikowski
2026-08-12 18:37 ` [PATCH v8 net-next 1/3] ptp_mock: Expose ptp_clock_info to external drivers Maciek Machnikowski
2026-08-12 20:35 ` Vadim Fedorenko
2026-08-12 18:37 ` [PATCH v8 net-next 2/3] netdevsim: Implement basic ptp support Maciek Machnikowski
2026-08-12 20:35 ` Vadim Fedorenko [this message]
2026-08-12 18:37 ` [PATCH v8 net-next 3/3] selftests: drivers/net: Implement ptp4l sync test using netdevsim Maciek Machnikowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0b4ca607-9e50-48e7-a016-c1b829a37250@linux.dev \
--to=vadim.fedorenko@linux.dev \
--cc=andrew@lunn.ch \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=maciek@machnikowski.net \
--cc=milena.olech@intel.com \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=willemdebruijn.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox