Re: [PATCH net-next v2] net: pcs: lynx: add support for 25GBASE-R

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

Hi Vincent,

On 9/22/26 21:40, Vincent Jardin via B4 Relay wrote:
> From: Vincent Jardin <vjardin@free.fr>
> 
> The Lynx PCS never supported 25GBASE-R. Add it, so that a 25G DPMAC on
> LX2160A can be driven by phylink.
> 
> The SerDes side had the mode since the commit
>   1cab8fba5073 ("phy: lynx-28g: add support for 25GBASER")
> and dpaa2-mac maps DPMAC_ETH_IF_CAUI to PHY_INTERFACE_MODE_25GBASER,
> but the PCS never handled it, so phylink_validate() failed with the
> interface.
> 
> 25GBASE-R is a serial mode without clause-37 in-band autonegotiation,
> exactly like 10GBASE-R: it does not needs any configuration, its state
> is read with phylink_mii_c45_pcs_get_state(), and it reports
> LINK_INBAND_DISABLE.
> 
> phylink_mii_c45_pcs_get_state() is extended in the same patch because
> without it the link comes up reporting Unknown/Unknown.
> 
> Suggested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Co-developed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Signed-off-by: Vincent Jardin <vjardin@free.fr>

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Maxime