Re: [PATCH net 1/2] net: ravb: Wait for operation mode to be applied

[claudiu beznea <claudiu.beznea@tuxon.dev>]

On 14.12.2023 21:41, Sergey Shtylyov wrote:
> resetOn 12/14/23 2:31 PM, Claudiu wrote:
> 
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> CSR.OPS bits specify the current operating mode and (according to
>> documentation) they are updated when the operating mode change request
>> is processed. Thus, check CSR.OPS before proceeding.
> 
>    The manuals I have indeed say we need to check CSR.OPS... But we only
> need to wait iff we transfer from the operation mode to the config mode...

RZ/G3S manual say about CSR.OPS "These bits are updated when an operating
mode changes is processed". From this I get we need to check it for any mode.

Also, on configuration procedure (of RZ/G3S) it say CSR.OPS need to be
checked when switching from reset -> config.

> 
>> Fixes: 568b3ce7a8ef ("ravb: factor out register bit twiddling code")
>> Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
>> Fixes: 7e09a052dc4e ("ravb: Exclude gPTP feature support for RZ/G2L")
>> Fixes: 3e3d647715d4 ("ravb: add wake-on-lan support via magic packet")
>> Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
> 
>    Hm, that long list does look weird...

OK, then I'll limit it to only c156633f1353 ("Renesas Ethernet AVB driver
proper"). Niklas also suggested this.

> 
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>> ---
>>  drivers/net/ethernet/renesas/ravb_main.c | 47 ++++++++++++++++++++----
>>  1 file changed, 39 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
>> index 9178f6d60e74..ce95eb5af354 100644
>> --- a/drivers/net/ethernet/renesas/ravb_main.c
>> +++ b/drivers/net/ethernet/renesas/ravb_main.c
>> @@ -683,8 +683,11 @@ static int ravb_dmac_init(struct net_device *ndev)
>>  
>>  	/* Setting the control will start the AVB-DMAC process. */
>>  	ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_OPERATION);
>> +	error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_OPERATION);
>> +	if (error)
>> +		netdev_err(ndev, "failed to switch device to operation mode\n");
> 
>    It doesn't look like ravb_wait() is needed here...
>    And besides, this pattern seems repetitive and worth factoring out into
> a single function.

In the final version of the driver proposed by RPM series it is gone. I
tried to keep the fixes simple. I'll update it as Niklas also suggested this.

> 
> [...]
>> @@ -1744,6 +1747,18 @@ static inline int ravb_hook_irq(unsigned int irq, irq_handler_t handler,
>>  	return error;
>>  }
>>  
>> +static int ravb_set_reset_mode(struct net_device *ndev)
>> +{
>> +	int error;
>> +
>> +	ravb_write(ndev, CCC_OPC_RESET, CCC);
>> +	error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_RESET);
>> +	if (error)
>> +		netdev_err(ndev, "failed to switch device to reset mode\n");
>> +
>> +	return error;
>> +}
>> +
> 
>    Again, ravb_wait() call doesn't seem necessary here...

Ok. I followed the guideline from the description of CSR.OPS. Let me know
if you want to keep it or not. I think I haven't saw any issues w/o this.

> 
> [...]
> 
> MBR, Sergey