From: crochu nicolas <nicolas.crochu@sgam.com>
To: romieu@fr.zoreil.com
Cc: jgarzik@pobox.com, netdev@oss.sgi.com
Subject: r8169 driver & -mm4
Date: Tue, 02 Mar 2004 16:19:00 +0100 [thread overview]
Message-ID: <1078240740.1781.24.camel@pinacola> (raw)
[-- Attachment #1: Type: text/plain, Size: 2984 bytes --]
Hi,
Since i compiled the latest 2.6.3-mm4, without PREEMP, without SMP, and
without ACPI, my laptop is almost working flawlessly.
But, i was surprised when i unplugged the RJ45 cable, in
/var/log/messages, i got :
[...]
Mar 2 10:48:43 pinacola kernel: r8169: eth0: Reset RTL8169s PHY
[...]
then, even if i plug the cable again, i got
[...]
Mar 2 10:48:43 pinacola kernel: r8169: eth0: Reset RTL8169s PHY
Mar 2 10:49:14 pinacola last message repeated 2561 times
Mar 2 10:50:14 pinacola last message repeated 5084 times
Mar 2 10:50:39 pinacola last message repeated 2049 times
[...]
I could not even ping any host. i had to do a
ifdown eth0
ifup eth0
To be able to ping the world again.
C.Nicolas.
lspci
---------------------------------------------
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller
(rev 02)
00:01.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller
(rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev
02)
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller
(rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio
Controller (rev 02)
00:1f.6 Modem: Intel Corp. 82801EB AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device
4e50
03:00.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
03:01.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
03:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
(rev 10)
/var/log/syslog
------------------------------------------
[...]
Mar 2 09:20:48 pinacola kernel: PCI: Found IRQ 5 for device
0000:03:03.0
Mar 2 09:20:48 pinacola kernel: eth0: Identified chip type is
'RTL8169s/8110s'.
Mar 2 09:20:48 pinacola kernel: eth0: RTL8169 at 0xe18ab800,
00:90:f5:27:36:0f, IRQ 5
Mar 2 09:20:48 pinacola kernel: eth0: Auto-negotiation Enabled.
Mar 2 09:20:48 pinacola kernel: eth0: 100Mbps Full-duplex operation.
[...]
/proc/interrupts
-------------------------------
CPU0
0: 25045424 XT-PIC timer
1: 58693 XT-PIC i8042
2: 0 XT-PIC cascade
5: 310068 XT-PIC Intel ICH5, uhci_hcd, ehci_hcd, eth0
11: 3 XT-PIC ohci1394, uhci_hcd, uhci_hcd, uhci_hcd
12: 417208 XT-PIC i8042
14: 32038 XT-PIC ide0
15: 23920 XT-PIC ide1
NMI: 0
ERR: 0
[-- Attachment #2: Ceci est une partie de message numériquement signée --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
reply other threads:[~2004-03-02 15:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1078240740.1781.24.camel@pinacola \
--to=nicolas.crochu@sgam.com \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox