From: Pekka Enberg <penberg@cs.helsinki.fi>
To: netdev@oss.sgi.com
Subject: [PATCH] net: 8139too netdev_priv conversion
Date: Wed, 27 Oct 2004 13:29:32 +0300 [thread overview]
Message-ID: <1098872973.9269.1.camel@localhost> (raw)
Hi,
Use netdev_priv() in 8139too driver instead of dev->priv.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
8139too.c | 72 +++++++++++++++++++++++++++++++-------------------------------
1 files changed, 36 insertions(+), 36 deletions(-)
Index: 2.6.10-rc1-bk1/drivers/net/8139too.c
===================================================================
--- 2.6.10-rc1-bk1.orig/drivers/net/8139too.c 2004-10-24 10:58:03.000000000 +0300
+++ 2.6.10-rc1-bk1/drivers/net/8139too.c 2004-10-27 13:25:23.846685248 +0300
@@ -731,9 +731,9 @@
struct pci_dev *pdev;
assert (dev != NULL);
- assert (dev->priv != NULL);
- tp = dev->priv;
+ tp = netdev_priv(dev);
+ assert (tp != NULL);
assert (tp->pci_dev != NULL);
pdev = tp->pci_dev;
@@ -794,7 +794,7 @@
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- tp = dev->priv;
+ tp = netdev_priv(dev);
tp->pci_dev = pdev;
/* enable device (incl. PCI PM wakeup and hotplug setup) */
@@ -976,7 +976,7 @@
return i;
assert (dev != NULL);
- tp = dev->priv;
+ tp = netdev_priv(dev);
assert (tp != NULL);
ioaddr = tp->mmio_addr;
assert (ioaddr != NULL);
@@ -1011,7 +1011,7 @@
dev->irq = pdev->irq;
/* dev->priv/tp zeroed and aligned in alloc_etherdev */
- tp = dev->priv;
+ tp = netdev_priv(dev);
/* note: tp->chipset set in rtl8139_init_board */
tp->drv_flags = board_info[ent->driver_data].hw_flags;
@@ -1119,7 +1119,7 @@
struct rtl8139_private *np;
assert (dev != NULL);
- np = dev->priv;
+ np = netdev_priv(dev);
assert (np != NULL);
unregister_netdev (dev);
@@ -1234,7 +1234,7 @@
static int mdio_read (struct net_device *dev, int phy_id, int location)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
int retval = 0;
#ifdef CONFIG_8139TOO_8129
void *mdio_addr = tp->mmio_addr + Config4;
@@ -1276,7 +1276,7 @@
static void mdio_write (struct net_device *dev, int phy_id, int location,
int value)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
#ifdef CONFIG_8139TOO_8129
void *mdio_addr = tp->mmio_addr + Config4;
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
@@ -1319,7 +1319,7 @@
static int rtl8139_open (struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
int retval;
void *ioaddr = tp->mmio_addr;
@@ -1367,7 +1367,7 @@
static void rtl_check_media (struct net_device *dev, unsigned int init_media)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
if (tp->phys[0] >= 0) {
mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
@@ -1377,7 +1377,7 @@
/* Start the hardware at open or resume. */
static void rtl8139_hw_start (struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
u32 i;
u8 tmp;
@@ -1446,7 +1446,7 @@
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
static void rtl8139_init_ring (struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
int i;
tp->cur_rx = 0;
@@ -1613,7 +1613,7 @@
static int rtl8139_thread (void *data)
{
struct net_device *dev = data;
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
unsigned long timeout;
daemonize("%s", dev->name);
@@ -1645,7 +1645,7 @@
static void rtl8139_start_thread(struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
tp->thr_pid = -1;
tp->twistie = 0;
@@ -1673,7 +1673,7 @@
static void rtl8139_tx_timeout (struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
int i;
u8 tmp8;
@@ -1718,7 +1718,7 @@
static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
unsigned int entry;
unsigned int len = skb->len;
@@ -2125,7 +2125,7 @@
static int rtl8139_poll(struct net_device *dev, int *budget)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
int orig_budget = min(*budget, dev->quota);
int done = 1;
@@ -2163,7 +2163,7 @@
struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_instance;
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
u16 status, ackstat;
int link_changed = 0; /* avoid bogus "uninit" warning */
@@ -2239,7 +2239,7 @@
static int rtl8139_close (struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
int ret = 0;
unsigned long flags;
@@ -2302,7 +2302,7 @@
other threads or interrupts aren't messing with the 8139. */
static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
void *ioaddr = np->mmio_addr;
spin_lock_irq(&np->lock);
@@ -2336,7 +2336,7 @@
aren't messing with the 8139. */
static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
void *ioaddr = np->mmio_addr;
u32 support;
u8 cfg3, cfg5;
@@ -2376,7 +2376,7 @@
static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
strcpy(info->bus_info, pci_name(np->pci_dev));
@@ -2385,7 +2385,7 @@
static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
spin_lock_irq(&np->lock);
mii_ethtool_gset(&np->mii, cmd);
spin_unlock_irq(&np->lock);
@@ -2394,7 +2394,7 @@
static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
int rc;
spin_lock_irq(&np->lock);
rc = mii_ethtool_sset(&np->mii, cmd);
@@ -2404,25 +2404,25 @@
static int rtl8139_nway_reset(struct net_device *dev)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
return mii_nway_restart(&np->mii);
}
static u32 rtl8139_get_link(struct net_device *dev)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
return mii_link_ok(&np->mii);
}
static u32 rtl8139_get_msglevel(struct net_device *dev)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
return np->msg_enable;
}
static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
np->msg_enable = datum;
}
@@ -2433,13 +2433,13 @@
#else
static int rtl8139_get_regs_len(struct net_device *dev)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
return np->regs_len;
}
static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(priv);
regs->version = RTL_REGS_VER;
@@ -2456,7 +2456,7 @@
static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
data[0] = np->xstats.early_rx;
data[1] = np->xstats.tx_buf_mapped;
@@ -2488,7 +2488,7 @@
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
- struct rtl8139_private *np = dev->priv;
+ struct rtl8139_private *np = netdev_priv(dev);
int rc;
if (!netif_running(dev))
@@ -2504,7 +2504,7 @@
static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
unsigned long flags;
@@ -2523,7 +2523,7 @@
static void __set_rx_mode (struct net_device *dev)
{
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
u32 mc_filter[2]; /* Multicast hash filter */
int i, rx_mode;
@@ -2572,7 +2572,7 @@
static void rtl8139_set_rx_mode (struct net_device *dev)
{
unsigned long flags;
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
spin_lock_irqsave (&tp->lock, flags);
__set_rx_mode(dev);
@@ -2584,7 +2584,7 @@
static int rtl8139_suspend (struct pci_dev *pdev, u32 state)
{
struct net_device *dev = pci_get_drvdata (pdev);
- struct rtl8139_private *tp = dev->priv;
+ struct rtl8139_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
unsigned long flags;
next reply other threads:[~2004-10-27 10:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-27 10:29 Pekka Enberg [this message]
2004-10-27 14:07 ` [PATCH] net: 8139too netdev_priv conversion Steffen Klassert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1098872973.9269.1.camel@localhost \
--to=penberg@cs.helsinki.fi \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).