From: jamal <hadi@cyberus.ca>
To: mellia@prezzemolo.polito.it
Cc: Lennert Buytenhek <buytenh@wantstofly.org>,
Harald Welte <laforge@gnumonks.org>,
P@draigBrady.com, e1000-devel@lists.sourceforge.net,
Jorge Manuel Finochietto <jorge.finochietto@polito.it>,
Giulio Galante <galante@polito.it>,
netdev@oss.sgi.com
Subject: Re: [E1000-devel] Transmission limit
Date: 03 Dec 2004 08:07:49 -0500 [thread overview]
Message-ID: <1102079268.1216.19.camel@jzny.localdomain> (raw)
In-Reply-To: <1101994772.18491.16.camel@mellia.lipar.polito.it>
On Thu, 2004-12-02 at 08:39, Marco Mellia wrote:
> We'll be glad to spend some time trying this out. Please, we are not
> very confortable with the linux bitkeeper maintenance method. Can we ask
> you to provide us a patch to a standard kernel/driver (whatever you
> prefer...)? Also a complete source sub-tree would be ok ;-)
Would a -rcX patch be fine for you?
2.6.10-rc2; which means you willl take 2.6.9 patch it with the
patch-2.6.10-rc2.gz from kernel.org/v2.6/testing directory then
patch one more time with patch i give you.
Let me know if you are uncomfortable with that as well.
[Sorry, I am disk poor and my stupid ISP still charges $1/MB/month even
in this age if i put it up at cyberus].
In the patch i give you i will include rx path improvement code that I
got from David Morsberger; I "think" i have seen some improvements with
it but i am not 100% sure. If you repeat the test where you drop the
packet right after eth_type_trans() with this patch on, I would be very
interested if you see any improvements.
In any case, expect something from me this weekend or monday (big party
this weekend ;->).
cheers,
jamal
next prev parent reply other threads:[~2004-12-03 13:07 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1101467291.24742.70.camel@mellia.lipar.polito.it>
2004-11-26 14:05 ` [E1000-devel] Transmission limit P
2004-11-26 15:31 ` Marco Mellia
2004-11-26 19:56 ` jamal
2004-11-29 14:21 ` Marco Mellia
2004-11-30 13:46 ` jamal
2004-12-02 17:24 ` Marco Mellia
2004-11-26 20:06 ` jamal
2004-11-26 20:56 ` Lennert Buytenhek
2004-11-26 21:02 ` Lennert Buytenhek
2004-11-27 9:25 ` Harald Welte
[not found] ` <20041127111101.GC23139@xi.wantstofly.org>
2004-11-27 11:31 ` Harald Welte
2004-11-27 20:12 ` Cesar Marcondes
2004-11-29 8:53 ` Marco Mellia
2004-11-29 14:50 ` Lennert Buytenhek
2004-11-30 8:42 ` Marco Mellia
2004-12-01 12:25 ` jamal
2004-12-02 13:39 ` Marco Mellia
2004-12-03 13:07 ` jamal [this message]
2004-11-26 15:40 ` Robert Olsson
2004-11-26 15:59 ` Marco Mellia
2004-11-26 16:57 ` P
2004-11-26 20:01 ` jamal
2004-11-29 10:19 ` P
2004-11-29 13:09 ` Robert Olsson
2004-11-29 20:16 ` David S. Miller
2004-12-01 16:47 ` Robert Olsson
2004-11-30 13:31 ` jamal
2004-11-30 13:46 ` Lennert Buytenhek
2004-11-30 14:25 ` jamal
2004-12-01 0:11 ` Lennert Buytenhek
2004-12-01 1:09 ` Scott Feldman
2004-12-01 15:34 ` Robert Olsson
2004-12-01 16:49 ` Scott Feldman
2004-12-01 17:37 ` Robert Olsson
2004-12-02 17:54 ` Robert Olsson
2004-12-02 18:23 ` Robert Olsson
2004-12-02 23:25 ` Lennert Buytenhek
2004-12-03 5:23 ` Scott Feldman
2004-12-10 16:24 ` Martin Josefsson
2004-12-01 18:29 ` Lennert Buytenhek
2004-12-01 21:35 ` Lennert Buytenhek
2004-12-02 6:13 ` Scott Feldman
2004-12-03 13:24 ` jamal
2004-12-05 14:50 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] Transmission limit) Lennert Buytenhek
2004-12-05 15:03 ` Martin Josefsson
2004-12-05 15:15 ` Lennert Buytenhek
2004-12-05 15:19 ` Martin Josefsson
2004-12-05 15:30 ` Martin Josefsson
2004-12-05 17:00 ` Lennert Buytenhek
2004-12-05 17:11 ` Martin Josefsson
2004-12-05 17:38 ` Martin Josefsson
2004-12-05 18:14 ` Lennert Buytenhek
2004-12-05 15:42 ` Martin Josefsson
2004-12-05 16:48 ` Martin Josefsson
2004-12-05 17:01 ` Martin Josefsson
2004-12-05 17:58 ` Lennert Buytenhek
2004-12-05 17:44 ` Lennert Buytenhek
2004-12-05 17:51 ` Lennert Buytenhek
2004-12-05 17:54 ` Martin Josefsson
2004-12-06 11:32 ` 1.03Mpps on e1000 (was: " jamal
2004-12-06 12:11 ` Lennert Buytenhek
2004-12-06 12:20 ` jamal
2004-12-06 12:23 ` Lennert Buytenhek
2004-12-06 12:30 ` Martin Josefsson
2004-12-06 13:11 ` jamal
[not found] ` <20041206132907.GA13411@xi.wantstofly.org>
[not found] ` <16820.37049.396306.295878@robur.slu.se>
2004-12-06 17:32 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] " P
2004-12-08 23:36 ` Ray Lehtiniemi
[not found] ` <41B825A5.2000009@draigBrady.com>
[not found] ` <20041209161825.GA32454@mail.com>
2004-12-09 17:12 ` 1.03Mpps on e1000 P
[not found] ` <20041209164820.GB32454@mail.com>
2004-12-09 17:19 ` P
2004-12-09 23:25 ` Ray Lehtiniemi
2004-12-05 21:12 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] Transmission limit) Scott Feldman
2004-12-05 21:25 ` Lennert Buytenhek
2004-12-06 1:23 ` 1.03Mpps on e1000 (was: " Scott Feldman
2004-12-02 17:31 ` [E1000-devel] Transmission limit Marco Mellia
2004-12-03 20:57 ` Lennert Buytenhek
2004-12-04 10:36 ` Lennert Buytenhek
2004-12-01 12:08 ` jamal
2004-12-01 15:24 ` Lennert Buytenhek
2004-11-26 17:58 ` Robert Olsson
2004-11-27 20:00 ` Lennert Buytenhek
2004-11-29 12:44 ` Marco Mellia
2004-11-29 15:19 ` Lennert Buytenhek
2004-11-29 17:32 ` Marco Mellia
2004-11-29 19:08 ` Lennert Buytenhek
2004-11-29 19:09 ` Lennert Buytenhek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1102079268.1216.19.camel@jzny.localdomain \
--to=hadi@cyberus.ca \
--cc=P@draigBrady.com \
--cc=buytenh@wantstofly.org \
--cc=e1000-devel@lists.sourceforge.net \
--cc=galante@polito.it \
--cc=jorge.finochietto@polito.it \
--cc=laforge@gnumonks.org \
--cc=mellia@prezzemolo.polito.it \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox