From: "Michael Chan" <mchan@broadcom.com>
To: "John W. Linville" <linville@tuxdriver.com>, davem@davemloft.net
Cc: netdev@oss.sgi.com
Subject: [PATCH 2.6.12-rc2 7/11] tg3: Add nvram detection for 5752
Date: Mon, 18 Apr 2005 00:47:19 -0700 [thread overview]
Message-ID: <1113810439.6504.66.camel@rh4> (raw)
In-Reply-To: <1113809864.6504.58.camel@rh4>
[-- Attachment #1: Type: text/plain, Size: 50 bytes --]
Signed-off-by: Michael Chan <mchan@broadcom.com>
[-- Attachment #2: tg3-107.patch --]
[-- Type: text/x-patch, Size: 3426 bytes --]
diff -Nru 106/drivers/net/tg3.c 107/drivers/net/tg3.c
--- 106/drivers/net/tg3.c 2005-04-15 17:15:28.000000000 -0700
+++ 107/drivers/net/tg3.c 2005-04-15 17:33:55.000000000 -0700
@@ -7096,6 +7096,63 @@
}
}
+static void __devinit tg3_get_5752_nvram_info(struct tg3 *tp)
+{
+ u32 nvcfg1;
+
+ nvcfg1 = tr32(NVRAM_CFG1);
+
+ switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
+ case FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ:
+ case FLASH_5752VENDOR_ATMEL_EEPROM_376KHZ:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ break;
+ case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ break;
+ case FLASH_5752VENDOR_ST_M45PE10:
+ case FLASH_5752VENDOR_ST_M45PE20:
+ case FLASH_5752VENDOR_ST_M45PE40:
+ tp->nvram_jedecnum = JEDEC_ST;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ break;
+ }
+
+ if (tp->tg3_flags2 & TG3_FLG2_FLASH) {
+ switch (nvcfg1 & NVRAM_CFG1_5752PAGE_SIZE_MASK) {
+ case FLASH_5752PAGE_SIZE_256:
+ tp->nvram_pagesize = 256;
+ break;
+ case FLASH_5752PAGE_SIZE_512:
+ tp->nvram_pagesize = 512;
+ break;
+ case FLASH_5752PAGE_SIZE_1K:
+ tp->nvram_pagesize = 1024;
+ break;
+ case FLASH_5752PAGE_SIZE_2K:
+ tp->nvram_pagesize = 2048;
+ break;
+ case FLASH_5752PAGE_SIZE_4K:
+ tp->nvram_pagesize = 4096;
+ break;
+ case FLASH_5752PAGE_SIZE_264:
+ tp->nvram_pagesize = 264;
+ break;
+ }
+ }
+ else {
+ /* For eeprom, set pagesize to maximum eeprom size */
+ tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
+
+ nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
+ tw32(NVRAM_CFG1, nvcfg1);
+ }
+}
+
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
@@ -7128,7 +7185,11 @@
tw32(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
}
- tg3_get_nvram_info(tp);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
+ tg3_get_5752_nvram_info(tp);
+ else
+ tg3_get_nvram_info(tp);
+
tg3_get_nvram_size(tp);
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
diff -Nru 106/drivers/net/tg3.h 107/drivers/net/tg3.h
--- 106/drivers/net/tg3.h 2005-04-15 17:15:28.000000000 -0700
+++ 107/drivers/net/tg3.h 2005-04-15 17:33:55.000000000 -0700
@@ -1399,6 +1399,20 @@
#define FLASH_VENDOR_SAIFUN 0x01000003
#define FLASH_VENDOR_SST_SMALL 0x00000001
#define FLASH_VENDOR_SST_LARGE 0x02000001
+#define NVRAM_CFG1_5752VENDOR_MASK 0x03c00003
+#define FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ 0x00000000
+#define FLASH_5752VENDOR_ATMEL_EEPROM_376KHZ 0x02000000
+#define FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED 0x02000003
+#define FLASH_5752VENDOR_ST_M45PE10 0x02400000
+#define FLASH_5752VENDOR_ST_M45PE20 0x02400002
+#define FLASH_5752VENDOR_ST_M45PE40 0x02400001
+#define NVRAM_CFG1_5752PAGE_SIZE_MASK 0x70000000
+#define FLASH_5752PAGE_SIZE_256 0x00000000
+#define FLASH_5752PAGE_SIZE_512 0x10000000
+#define FLASH_5752PAGE_SIZE_1K 0x20000000
+#define FLASH_5752PAGE_SIZE_2K 0x30000000
+#define FLASH_5752PAGE_SIZE_4K 0x40000000
+#define FLASH_5752PAGE_SIZE_264 0x50000000
#define NVRAM_CFG2 0x00007018
#define NVRAM_CFG3 0x0000701c
#define NVRAM_SWARB 0x00007020
next prev parent reply other threads:[~2005-04-18 7:47 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-13 23:38 [patch 2.6.12-rc2 0/10] add bcm5752 support plus some cleanup to tg3 John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 1/10] tg3: add basic bcm5752 support John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 2/10] tg3: add bcm5752 to tg3_pci_tbl John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 3/10] tg3: add bcm5752 entry to pci_ids.h John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 4/10] tg3: use TG3_FLG2_5705_PLUS instead of multi-way if's John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 5/10] tg3: define TG3_FLG2_5750_PLUS flag John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 6/10] tg3: use new " John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 7/10] tg3: more use of TG3_FLG2_5705_PLUS flag John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 8/10] tg3: use TG3_FLG2_57{05,50}_PLUS flags in tg3_get_invariants John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 9/10] tg3: check TG3_FLG2_5750_PLUS flag to set TG3_FLG2_5705_PLUS flag John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 10/10] tg3: add support for bcm5752 rev a1 John W. Linville
2005-04-22 0:04 ` David S. Miller
2005-04-22 0:04 ` [patch 2.6.12-rc2 9/10] tg3: check TG3_FLG2_5750_PLUS flag to set TG3_FLG2_5705_PLUS flag David S. Miller
2005-04-22 0:03 ` [patch 2.6.12-rc2 8/10] tg3: use TG3_FLG2_57{05,50}_PLUS flags in tg3_get_invariants David S. Miller
2005-04-22 0:02 ` [patch 2.6.12-rc2 7/10] tg3: more use of TG3_FLG2_5705_PLUS flag David S. Miller
2005-04-22 0:02 ` [patch 2.6.12-rc2 6/10] tg3: use new TG3_FLG2_5750_PLUS flag David S. Miller
2005-04-22 0:01 ` [patch 2.6.12-rc2 5/10] tg3: define " David S. Miller
2005-04-22 0:00 ` [patch 2.6.12-rc2 4/10] tg3: use TG3_FLG2_5705_PLUS instead of multi-way if's David S. Miller
2005-04-21 23:59 ` [patch 2.6.12-rc2 3/10] tg3: add bcm5752 entry to pci_ids.h David S. Miller
2005-05-27 18:47 ` [patch 2.6.12-rc5] tg3: add bcm5752 entry to pci.ids John W. Linville
2005-05-27 18:53 ` Christoph Hellwig
2005-05-27 19:00 ` John W. Linville
2005-05-27 18:12 ` Michael Chan
2005-05-27 19:02 ` Christoph Hellwig
2005-05-27 19:30 ` David S. Miller
2005-05-27 19:24 ` Michael Chan
2005-05-27 20:40 ` Jeff Garzik
2005-05-27 20:41 ` David S. Miller
2005-05-27 20:40 ` David S. Miller
2005-05-27 22:46 ` Dave Jones
2005-04-21 23:58 ` [patch 2.6.12-rc2 2/10] tg3: add bcm5752 to tg3_pci_tbl David S. Miller
2005-04-21 23:57 ` [patch 2.6.12-rc2 1/10] tg3: add basic bcm5752 support David S. Miller
2005-04-18 6:42 ` [PATCH 2.6.12-rc2 0/11] tg3: Add complete support for 5752 Michael Chan
2005-04-18 6:50 ` [PATCH 2.6.12-rc2 1/11] tg3: Minor 5752 fixes Michael Chan
2005-04-18 7:08 ` [PATCH 2.6.12-rc2 2/11] tg3: Split tg3_phy_probe into 2 functions Michael Chan
2005-04-18 7:22 ` [PATCH 2.6.12-rc2 3/11] tg3: Setup proper GPIO settings Michael Chan
2005-04-18 7:28 ` [PATCH 2.6.12-rc2 4/11] tg3: Fix tg3_set_power_state() Michael Chan
2005-04-18 7:37 ` [PATCH 2.6.12-rc2 5/11] tg3: Workaround 5752 A0 chip ID Michael Chan
2005-04-18 7:47 ` Michael Chan [this message]
2005-04-18 7:54 ` [PATCH 2.6.12-rc2 8/11] tg3: Add nvram lock-out support for 5752 TPM Michael Chan
2005-04-18 7:57 ` [PATCH 2.6.12-rc2 9/11] tg3: Fix bug in tg3_set_eeprom() Michael Chan
2005-04-18 7:59 ` [PATCH 2.6.12-rc2 10/11] tg3: Add msi support Michael Chan
2005-04-18 8:02 ` [PATCH 2.6.12-rc2 11/11] tg3: Add msi test Michael Chan
2005-04-18 7:41 ` [PATCH 2.6.12-rc2 6/11] tg3: Add GPIO3 for 5752 Michael Chan
2005-04-22 0:15 ` [PATCH 2.6.12-rc2 0/11] tg3: Add complete support " David S. Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1113810439.6504.66.camel@rh4 \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=linville@tuxdriver.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).