From: "Michael Chan" <mchan@broadcom.com>
To: "John W. Linville" <linville@tuxdriver.com>, davem@davemloft.net
Cc: netdev@oss.sgi.com
Subject: [PATCH 2.6.12-rc2 9/11] tg3: Fix bug in tg3_set_eeprom()
Date: Mon, 18 Apr 2005 00:57:27 -0700 [thread overview]
Message-ID: <1113811047.6504.78.camel@rh4> (raw)
In-Reply-To: <1113809864.6504.58.camel@rh4>
[-- Attachment #1: Type: text/plain, Size: 149 bytes --]
Fix a bug in tg3_set_eeprom() when the length is less than 4 and the
offset is not 4-byte aligned.
Signed-off-by: Michael Chan <mchan@broadcom.com>
[-- Attachment #2: tg3-109.patch --]
[-- Type: text/x-patch, Size: 504 bytes --]
diff -Nru 108/drivers/net/tg3.c 109/drivers/net/tg3.c
--- 108/drivers/net/tg3.c 2005-04-15 17:48:23.000000000 -0700
+++ 109/drivers/net/tg3.c 2005-04-15 21:26:02.000000000 -0700
@@ -6560,10 +6560,12 @@
start = cpu_to_le32(start);
len += b_offset;
offset &= ~3;
+ if (len < 4)
+ len = 4;
}
odd_len = 0;
- if ((len & 3) && ((len > 4) || (b_offset == 0))) {
+ if (len & 3) {
/* adjustments to end on required 4 byte boundary */
odd_len = 1;
len = (len + 3) & ~3;
next prev parent reply other threads:[~2005-04-18 7:57 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-13 23:38 [patch 2.6.12-rc2 0/10] add bcm5752 support plus some cleanup to tg3 John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 1/10] tg3: add basic bcm5752 support John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 2/10] tg3: add bcm5752 to tg3_pci_tbl John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 3/10] tg3: add bcm5752 entry to pci_ids.h John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 4/10] tg3: use TG3_FLG2_5705_PLUS instead of multi-way if's John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 5/10] tg3: define TG3_FLG2_5750_PLUS flag John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 6/10] tg3: use new " John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 7/10] tg3: more use of TG3_FLG2_5705_PLUS flag John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 8/10] tg3: use TG3_FLG2_57{05,50}_PLUS flags in tg3_get_invariants John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 9/10] tg3: check TG3_FLG2_5750_PLUS flag to set TG3_FLG2_5705_PLUS flag John W. Linville
2005-04-13 23:38 ` [patch 2.6.12-rc2 10/10] tg3: add support for bcm5752 rev a1 John W. Linville
2005-04-22 0:04 ` David S. Miller
2005-04-22 0:04 ` [patch 2.6.12-rc2 9/10] tg3: check TG3_FLG2_5750_PLUS flag to set TG3_FLG2_5705_PLUS flag David S. Miller
2005-04-22 0:03 ` [patch 2.6.12-rc2 8/10] tg3: use TG3_FLG2_57{05,50}_PLUS flags in tg3_get_invariants David S. Miller
2005-04-22 0:02 ` [patch 2.6.12-rc2 7/10] tg3: more use of TG3_FLG2_5705_PLUS flag David S. Miller
2005-04-22 0:02 ` [patch 2.6.12-rc2 6/10] tg3: use new TG3_FLG2_5750_PLUS flag David S. Miller
2005-04-22 0:01 ` [patch 2.6.12-rc2 5/10] tg3: define " David S. Miller
2005-04-22 0:00 ` [patch 2.6.12-rc2 4/10] tg3: use TG3_FLG2_5705_PLUS instead of multi-way if's David S. Miller
2005-04-21 23:59 ` [patch 2.6.12-rc2 3/10] tg3: add bcm5752 entry to pci_ids.h David S. Miller
2005-05-27 18:47 ` [patch 2.6.12-rc5] tg3: add bcm5752 entry to pci.ids John W. Linville
2005-05-27 18:53 ` Christoph Hellwig
2005-05-27 19:00 ` John W. Linville
2005-05-27 18:12 ` Michael Chan
2005-05-27 19:02 ` Christoph Hellwig
2005-05-27 19:30 ` David S. Miller
2005-05-27 19:24 ` Michael Chan
2005-05-27 20:40 ` Jeff Garzik
2005-05-27 20:41 ` David S. Miller
2005-05-27 20:40 ` David S. Miller
2005-05-27 22:46 ` Dave Jones
2005-04-21 23:58 ` [patch 2.6.12-rc2 2/10] tg3: add bcm5752 to tg3_pci_tbl David S. Miller
2005-04-21 23:57 ` [patch 2.6.12-rc2 1/10] tg3: add basic bcm5752 support David S. Miller
2005-04-18 6:42 ` [PATCH 2.6.12-rc2 0/11] tg3: Add complete support for 5752 Michael Chan
2005-04-18 6:50 ` [PATCH 2.6.12-rc2 1/11] tg3: Minor 5752 fixes Michael Chan
2005-04-18 7:08 ` [PATCH 2.6.12-rc2 2/11] tg3: Split tg3_phy_probe into 2 functions Michael Chan
2005-04-18 7:22 ` [PATCH 2.6.12-rc2 3/11] tg3: Setup proper GPIO settings Michael Chan
2005-04-18 7:28 ` [PATCH 2.6.12-rc2 4/11] tg3: Fix tg3_set_power_state() Michael Chan
2005-04-18 7:37 ` [PATCH 2.6.12-rc2 5/11] tg3: Workaround 5752 A0 chip ID Michael Chan
2005-04-18 7:47 ` [PATCH 2.6.12-rc2 7/11] tg3: Add nvram detection for 5752 Michael Chan
2005-04-18 7:54 ` [PATCH 2.6.12-rc2 8/11] tg3: Add nvram lock-out support for 5752 TPM Michael Chan
2005-04-18 7:57 ` Michael Chan [this message]
2005-04-18 7:59 ` [PATCH 2.6.12-rc2 10/11] tg3: Add msi support Michael Chan
2005-04-18 8:02 ` [PATCH 2.6.12-rc2 11/11] tg3: Add msi test Michael Chan
2005-04-18 7:41 ` [PATCH 2.6.12-rc2 6/11] tg3: Add GPIO3 for 5752 Michael Chan
2005-04-22 0:15 ` [PATCH 2.6.12-rc2 0/11] tg3: Add complete support " David S. Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1113811047.6504.78.camel@rh4 \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=linville@tuxdriver.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).